This was done by Well Done Tips. 7 months before you. The design is too similar, and your description is almost the same. The least you could have done is credit his video/channel for it.
I don't know if I'm shadowbaned or something because I went wild in comments under potato canon wideo but I must say NOW this is quality. Your wideos now are better than ever. Good job!
MAJESTIC SIR!!SALUTE!! NEEDS A LOT COMPLETE SET OF TOOLS YET I WISH TO DO STUFFS LIKE THESE WHEN I RETIRE FROM THE SERVICE SORT OF NEW VENTURE SO TO SPEAK TNX 4 THIS WONDERFUL IDEA THIS IS A SALEABLE STUFF FOR BAR AFFICIONADOS
Hi! Very nice instructive video. I liked and subscribed, also visited ypur page to get the downloadable info with the measurements and it wasn't available. Could you provide that document? Thank you
I think this is the first how too i have seen on your channel? Loved it. And love small projects like this. Cool gift ideas, fun and inexpensive. Thank you. 😁
I really enjoyed this one, your works are so neat and your choices of music are splendid! And I wouldn't mind if you make a computer case for your next video!
Really nice work as usual, though you should have added a leather strip at the top of the bottle holder (bottle's neck level) to prevent it from fallin when transporting it ;)
What would it take to get the actual plans? I visited your website but the jerry can doesn’t have the measurements or anything just the materials. A little disappointed
Could you add someting in the unused space above the bar? Use the spout for something like a phone charger or small Bluetooth speaker? That said, it's a really really cool idea as is.
Highly doubt I'll get a response since this video is 5 years old but I checked on your website and it said the wood dimensions will be coming soon. Any chance those are available? Thank you in advance!
Шикарный вариант набора джентльмена! Like for Jameson! Надо тоже такой бар сделать. В гараже канистру можно дверцей развернуть назад. Тогда жена не догадается где моя заначка! )))
What kind of wood did you use and what were the specifications? Also what kind of tools did you use? I don't have a workshop so I have to know what tools I'll have to buy.
Would you be willing to put up the dimensions of the wood for inside, and also the type of trim used, im having problems with the bends on the trim, the keep bulging.......thankyou
Meh, yes they would, but they also tend to require more precision with the drilling. It's a real pain in the ass to accurately line up 2 hinges the way he's doing it.
Очередное крутое видео. Спасибо! Если позволишь то пару мыслей скажу: Замка бы одного хватило, так проще открывать. Ведь это явно должно висеть или стоять стационарно. И вспоминая минибары из 90х я бы посоветовал при возможности использовать зеркало как заднюю стенку, это визуально углубит пространство и "увеличит" количество выпивки😏
I've got a few ILLY Coffee Canisters from my work which I would like to make some sort of shelf system thing out of but not entirely sure how to do it. So if you come across one, please make something out of it, so I can copy your work, and put it in my man cave. Thanks. Great video.
@@InspireToMake Maybe from a coffee shop or look online, mine is a 3000g one / 3kg, but as I said i got mine from work as it was empty and was going to be thrown away, but I'm sure you could find something on google?
when the edge trim goes around the corner it doesn’t sit flat on the metal. it pops/folds up because it’s bending. did you cut it at all on the corners to prevent this? not sure how filing the corners will help this issue
@@ClassicJohnno I got it now. Your corner turn is a little sharp and the trim is bulging on the sharp bend. I guess you can make some relief cuts on the metal strip inside the trim.
what about removing the paint and making a portable stove out of a jerrycan? Follow up, I suggest using a low grit on a hand sander to remove the paint, please for the life of me, check if it's galvanized
Hit that bell button and subscribe to see more cool projects like this in the future!!!
Awesome, awesome, and AWESOME PROJECT!!! Thank You))
This was done by Well Done Tips. 7 months before you. The design is too similar, and your description is almost the same. The least you could have done is credit his video/channel for it.
When are you planning to have the downloadable docs??
Make me a jeri curl mini bar too and ill make my mom and dad subscribe ..
Kirk
Probably the best jerrycan bar video on here
Excellent camera angle & edit. Quick & easy to watch.
Keep doing simple project with simple tools like this.
Tks alot !!!
Thanks =))
I say you just coat the whole inside of the jerry can with food grade safe silicone and fill it with booze, call it a day! lol
THIS
Awesome build! As a bartender, I'd love to try a hand at making my own and customizing it a bit.
Please make a computer case out of one of these, that'd be sick 👌
Great video. Easy to understand and love the B Roll and music overlay. Really adds to the video.
I made mini bar from restored jerry can so its cool and also something from past, its a nice detail in my house and i love it
This sure takes a lot of time and effort, but it is worth it, nice video, can't wait for your next project
Thanks =))
Weldmonger is the best you tube information about so many different welding techniques and equipment
WOW 😮!!! AWESOME tutorial 🤩!!! Love the music that you chosen 😍!!! Thank you for the GREAT CONTENT Igor, love your channel so much 🤜🤛!!!
I don't know if I'm shadowbaned or something because I went wild in comments under potato canon wideo but I must say NOW this is quality. Your wideos now are better than ever. Good job!
Thanks, I'm experimenting with different formats. I agree the potato gun video was not very engaging =))
Great video! Do you have the PDF with the measurements and everything? Thanks!
Computer case would b awesome, great vid, love this channel
MAJESTIC SIR!!SALUTE!!
NEEDS A LOT COMPLETE SET OF TOOLS YET I WISH TO DO STUFFS LIKE THESE WHEN I RETIRE FROM THE SERVICE SORT OF NEW VENTURE SO TO SPEAK
TNX 4 THIS WONDERFUL IDEA
THIS IS A SALEABLE STUFF FOR BAR AFFICIONADOS
What a fun idea. Great video. Keep up the good work!
Hi! Very nice instructive video. I liked and subscribed, also visited ypur page to get the downloadable info with the measurements and it wasn't available. Could you provide that document? Thank you
I think this is the first how too i have seen on your channel? Loved it. And love small projects like this. Cool gift ideas, fun and inexpensive.
Thank you. 😁
Thanks, I'm glad you like it! =)
Very nice project! I think it's perfect for present.
Thanks. =) I think this can be a great present too
Now I know what I do next Holiday👌
I really enjoyed this one, your works are so neat and your choices of music are splendid! And I wouldn't mind if you make a computer case for your next video!
A great idea!. Very good work👍
Just a tip, repaint what you cut with the angle grinder to avoid future rust.
I don't think rust will be a problem for indoor use.
@@InspireToMake
Depends upon where you live. If you have lots of humidity, it might become an issue. Love this project, btw.
Working with metal must be so fun😃
Jerry can for the win boys.
Hi, where can we find the building plans ? It’s not available on your site.
Thank you very much.
Really nice work as usual, though you should have added a leather strip at the top of the bottle holder (bottle's neck level) to prevent it from fallin when transporting it ;)
That looks sick bro
Thanks!
You are the best
No, you! Thanks =))
How does he keep his shop so clean when he's working? I make a huge mess in my shop whenever I'm working on a project
Hell... I make a huge mess in my shop just walking through it :(
Я тоже заметил чистоту и порядок! Сам фанат чистоты и порядка.
great idea very cool but my only question is how did you fit the coke cans in the holder
Nice. You could make motorcycle panniers also
Subscribed - that is an awesome gift idea!
That is awesome man! Great job.
Thanks =)
👏🏻👏🏻👏🏻👏🏻 my English not good sorry !!!
Very very special work !!! My pleasure look your working !!! Congrats !!!
I think it will look extremely nice if you burn the wood slightly!
It would be nice. I guess I can put some finish on the wood.
What would it take to get the actual plans? I visited your website but the jerry can doesn’t have the measurements or anything just the materials. A little disappointed
That's a very neat project! :)
ITS A GREAT JOB CONGRATS MY FRIEND BEST REGARDS
Thanks :)))
Very nice!
Could you add someting in the unused space above the bar? Use the spout for something like a phone charger or small Bluetooth speaker? That said, it's a really really cool idea as is.
Great job man!
did you guys already post this video months ago this video ?
Demitri S i taught that too but I searched and found out that 2 other channels had made a similar video.
Nonetheless this is still a great video
Looks sweet Igor!
Thanks
That's a damn good work. Thanks!
Highly doubt I'll get a response since this video is 5 years old but I checked on your website and it said the wood dimensions will be coming soon. Any chance those are available? Thank you in advance!
Шикарный вариант набора джентльмена! Like for Jameson! Надо тоже такой бар сделать. В гараже канистру можно дверцей развернуть назад. Тогда жена не догадается где моя заначка! )))
можно еще из огнетушителя сделать
@@InspireToMake да, тоже интересно получится.
WOW SUPER THANK YOU .
What kind of wood did you use and what were the specifications? Also what kind of tools did you use? I don't have a workshop so I have to know what tools I'll have to buy.
Would you be willing to put up the dimensions of the wood for inside, and also the type of trim used, im having problems with the bends on the trim, the keep bulging.......thankyou
Cool i like the concept!
Rivets would also have been nice instead of the screws. Never the less great video
Meh, yes they would, but they also tend to require more precision with the drilling. It's a real pain in the ass to accurately line up 2 hinges the way he's doing it.
I like that one!!!
Hmmm ... a case for stomp boxes for guitarists, or more specifically one ...
Cool Idea!
Очередное крутое видео. Спасибо!
Если позволишь то пару мыслей скажу:
Замка бы одного хватило, так проще открывать. Ведь это явно должно висеть или стоять стационарно.
И вспоминая минибары из 90х я бы посоветовал при возможности использовать зеркало как заднюю стенку, это визуально углубит пространство и "увеличит" количество выпивки😏
Да, зеркало былобы классно туда вставить
THANK YOU FOR DETAIL VIDEO
When will the PDF file to make this be uploaded, really only need the measurements for the shelves.
I'll make it this week
That guaraná antartica, only love for your projects from brazil.
It’s my favourite soda 🥤 drink. It’s hard to find it here in Canada :)))
Единственное видео про бар-канистру, Достойное уважения!!! Класс!!!
Спасибо:))
Amazing and wounderful , that mine bar is mobility .. thank you nice job ..
Awesome, I want to try that!
How many feet of edge trim did you use
Cool idea, 👌👌👌
What does the Triangle on your forearm represent?
@Well done tips want this video back! Can u ?
very cool
Can you make a humidor for cigars? A cheap one but awesome, as all the stuff you make
Great idea!
Is there any chance you could update the pdf for layout and directions? The current pdf link has expired. Ty.
Awesome 😍😍
I've got a few ILLY Coffee Canisters from my work which I would like to make some sort of shelf system thing out of but not entirely sure how to do it. So if you come across one, please make something out of it, so I can copy your work, and put it in my man cave. Thanks. Great video.
where can I get those canisters?
@@InspireToMake Maybe from a coffee shop or look online, mine is a 3000g one / 3kg, but as I said i got mine from work as it was empty and was going to be thrown away, but I'm sure you could find something on google?
nice Project … nevertheless you should give credit to other channels, otherwise the idea appears to be stolen
th-cam.com/video/jpdZzYPrA2U/w-d-xo.html
Thats exactly what I meant
It’s a shame no credit was given.
@@iamdamo Yes! Mostly because someone really had to put effort in this.
Who cares. The guy is doing the work himself.
where do you get that epic music?
Guarana Porraaaa!! 😍
Hi love your vids
Niiiice!
Y cómo vas a meter las latas luego que se terminen ?
Why is there a Guaraná Antártica pack on the background? Are you brazillian? That soft drink is amazing!
I’m not Brazilian, but I like that drink:)
where did you get the locks(: nice video
Ebay
супер
Видео жесть 👍. Спасибо за классное видео!!!
how do you deal with the issue of the edge trim bunching up on the corners on the door?
File down the corners
when the edge trim goes around the corner it doesn’t sit flat on the metal. it pops/folds up because it’s bending. did you cut it at all on the corners to prevent this?
not sure how filing the corners will help this issue
@@ClassicJohnno I got it now. Your corner turn is a little sharp and the trim is bulging on the sharp bend. I guess you can make some relief cuts on the metal strip inside the trim.
@@InspireToMake can you please provide a link to the plans. I can't find them
I saw this few years ago
It came out one year ago lol
I would have loved to see this as a computer build
i saw someone do the exact same in green, was it you ?
th-cam.com/video/jpdZzYPrA2U/w-d-xo.html
ok i guess not
You should also attach a led light inside the can, open the door the light will on, close the door the light will off!!"
Incrível
Cool
is it a Guarana Antartica soda box? Coolll
Yep! I was waiting for somebody to notice =))
@@InspireToMake I thought it was sold only in Brazil !!!
as this is interesting, we here in Brazil use things from other places as souvenirs, and you there, using things here from Brazil, very cool.
It’s the best soda, I love it
what about removing the paint and making a portable stove out of a jerrycan?
Follow up, I suggest using a low grit on a hand sander to remove the paint, please for the life of me, check if it's galvanized
What is this for background Music?
First of all, you should use metric instead of imperial units. Besides, great movie and cool final product.
Отличная музыка 🎵
Where are you from?
Прекрасный проект :)
I like it and your other design too but 4 cans of pop for a whole bottle of booze?
How to cut the corners i dont have that tool
make a computer case of your idea please please please
Well Done Tips did it first!
Лучшее исполнение которое нашёл. 👍
Computer case would be cool.
What is the song playing during 3:36?