Bro, I can't thank you enough. It's been 9 months since I stepped away from hard surface modeling. I had to find a job to make a living, and I got so detached from Blender that I thought I'd never come back to it. But then I saw your thumbnail, and it hit me like a flashback. I remembered working on the same Ferrari 2015 model-how badly I wanted to finish it but never could. That experience pushed me into a rabbit hole, making me feel like it was all a waste. I convinced myself I had to move on and make my passion a second priority in life.
This video turned up amazing, keep the good work up! I have a question for you: do you do car designing on order, and how much would you charge per model?
You can convert triangles to quads using the Dissolve Edges and Knife Tool-I use them at 11:25 in the tutorial. If that doesn't work, hide the tris in less-visible areas or on flat surfaces to clean up the topology.
ciao buonasera, è molto bello e grazie per la tua disponibilità, sono principiante in blender, non capisco inglese, faccio parte degli over 70, mi chiedo se è possibile allegare una didascalia semplice per i comandi del mouse che vengono proiettati sullo schermo, grazie e buon lavoro in bocca al lupo per tutto.Ciao
Yes,enable the built-in 3D Printing Toolbox Add-on for 3D printing. You can use shortcut S to adjust the size of the mesh, and set the desired unit scale under the Scene Properties tab.
Yes. In edge mode, use the select > select sharp edges command from the header, you may need to select and deselect some edges manually, then move to the sidebar, in ITEM tab, set edge data:bevel weight to around 0.3. Next, add a bevel modifier and change limit method to weight.Then you can press ctrl + 2 to add subdivision. I hope this helps :)
In edge mode, use the select > select sharp edges command from the header, you may need to select and deselect some edges manually, then move to the sidebar, in ITEM tab, set edge data:bevel weight to around 0.3. Next, add a bevel modifier and change limit method to weight.Then you can press ctrl + 2 to add subdivision.
Bro, I can't thank you enough. It's been 9 months since I stepped away from hard surface modeling. I had to find a job to make a living, and I got so detached from Blender that I thought I'd never come back to it. But then I saw your thumbnail, and it hit me like a flashback. I remembered working on the same Ferrari 2015 model-how badly I wanted to finish it but never could. That experience pushed me into a rabbit hole, making me feel like it was all a waste. I convinced myself I had to move on and make my passion a second priority in life.
Wow, thanks for sharing that. It means a lot to hear my video brought back that spark for you. Stay inspired and keep creating💪💪💪
Thanks! Finally someone NOT in love with the timelapse!
🙏Thanks!🙏
Wooo! Thats a very difficult car to model too. Very impressive!
Thanks❤️❤️❤️
Please how did you get your y axis to be horizontal in the top orthographic view?(-90 degrees)😅
Hold the Alt key while rotating your view
This video turned up amazing, keep the good work up! I have a question for you: do you do car designing on order, and how much would you charge per model?
Thanks for your interest! Feel free to email me at joyce.love2.design@gmail.com to discuss details. Looking forward to it!
nuevo subscriptor saludos desde paraguay, gracias por el tutorial
Gracias！🙏🙏🙏
New subscriber, I was searching this like video❤❤❤❤❤❤❤
Thanks for subscribing! 🙏🙏🙏
At 15:29 , what do i need to do if there are any triangles?
You can convert triangles to quads using the Dissolve Edges and Knife Tool-I use them at 11:25 in the tutorial. If that doesn't work, hide the tris in less-visible areas or on flat surfaces to clean up the topology.
Why cant I extrude the vertices? I move my point with G to the top of the hood and when hitting E to plot my points, nothings happening
try Alt+E instead
@@JOYCE_3D I figured it out… I didn’t hit 1 for vertices I was still on faces
your first korean subscriber
Thank you so much! Happy to have you here.
ciao buonasera, è molto bello e grazie per la tua disponibilità, sono principiante in blender, non capisco inglese, faccio parte degli over 70, mi chiedo se è possibile allegare una didascalia semplice per i comandi del mouse che vengono proiettati sullo schermo, grazie e buon lavoro in bocca al lupo per tutto.Ciao
Can belender be used for 3d printing? Can sizes be adjusted in this program?
Yes,enable the built-in 3D Printing Toolbox Add-on for 3D printing.
You can use shortcut S to adjust the size of the mesh, and set the desired unit scale under the Scene Properties tab.
@JOYCE_3D great thanks 👍🙏
Hello and thank you for this video! so complicated to model vehicles! did you put surface subdivision after?
Yes. In edge mode, use the select > select sharp edges command from the header, you may need to select and deselect some edges manually, then move to the sidebar, in ITEM tab, set edge data:bevel weight to around 0.3. Next, add a bevel modifier and change limit method to weight.Then you can press ctrl + 2 to add subdivision.
I hope this helps :)
What about the subdivision steps?
In edge mode, use the select > select sharp edges command from the header, you may need to select and deselect some edges manually, then move to the sidebar, in ITEM tab, set edge data:bevel weight to around 0.3. Next, add a bevel modifier and change limit method to weight.Then you can press ctrl + 2 to add subdivision.
I love it ❤
Thanks❤
thanks today i made my first widebody kit. blender is so much fun and also pretty chill, like your video
I'm so glad you enjoyed the video! Congrats on making your first kit! 🎉
Nice video but it’s too hard for me to
Cars are amongst the hardest things to model, dont be disheartened
Keep trying , it took me 2 years to actually completely model a semi decent car , consistency is key
Do you do car designing on order?
Drop me a message at joyce.love2.design@gmail.com, happy to discuss further!
Love it 👍👍
Thanks ❤️❤️
You used .JPG in the video and the image provided is a .GIF
Yes,they all work well in Blender
Nice ❤❤❤❤
Thx!
blueprints download link:
drawingdatabase.com/wp-content/uploads/2016/12/Ferrari-FXX-K.gif
Wow
You makin this look too easy
Thanks! Hope you enjoy it.
@@JOYCE_3D i did
grazie trovato sul web.
Thank you for your kind words, best of luck with Blender!
he?