Hi John/JB, I have watched several episodes on when you trim the Tongsheng TSDZ2. To do what you have done seemed too complicated for me! I decided to take a short cut. It cost money and didn’t work … I bought the yellow box from Eco-ebike and used the APT burn tool with the latest bootloader from github. Result: The display is frozen and the screen reads: Keep pedals free and wait I have invested a lot of time to fit the motor to a nice frame and really hope there is a fix. Ciao, Peter in Göteborg, Sweden
Hi Peter I’m sorry you are having problems. All I know is what is in my videos and the ktlcd3 display. Seems you have used an 850 or 860 so you need to follow the casainho 860 thread. Let me know if you can’t find it. Alternatively the guys at eco bike are very helpful maybe speak to them first. As always I recommend you try the stock motor first to make sure it actually works. I don’t know how to flash the 860 it seems hard to me I don’t think it’s worth the trouble. Maybe just go back to the stock display and use the mr brusa early firmware like c2. It uses a Java app to make all the changes.
hi! do you recognize my problem? since i wrote i have tried to flash the display with the settings shown in part two (with an off the shelf bootloader), but st visual programmer givs the error message ”cannot connect to target”.
@@peterwockatz6772 there are 2 possibilities maybe the cable is too long from motor to dongle. Mine is only 20 cm. Maybe use 3v line instead of 5v. Also it could be the pc. Windows 7 works better. One more thing maybe wiring is not right or your stlink wiring is labelled incorrectly
Ok so i had been running this firmware and setup for a while, i had a issue with my battery and it has bricked the software so how. after replacing both the lcd and the control unit in the motor i still can not get it to power on, any ideas?
@@jbalatutube The battery is only part i can confirm is working still, have checked with charger and quadcopters. Thanks for your input though. Do you know anywhere in the uk that could help?
@@kennethcartman473 no I’m in Australia sorry. You can try flashing the mr brusa firmware and see what happens. endless-sphere.com/forums/viewtopic.php?p=1664848#p1664848
I’m pretty sure the original firmware is right protected so no, but the Opensource stuff is free to download so no need to copy, just need to match the version with the tsdz2, recommend v20b1 it went on very easy
I am just wondering why the stm programs seem to vary? I dl'ed from the link given on gethub and it is a "utility", whereas eco-ebike gives links to a complete toolset with a different looking program utility. the latter never installs properly, in that I always get a failure of some type. any ideas? im on windows 10
Is there someone able to answer to the question from Ronans Tab ? I'm also interested to know wich connector part number is required to connect the ST link Cable to the display PCB. Does it need to be soldered or just plugged in ? Thanks !
Ok, found, i answer to myself : fr.aliexpress.com/item/32885532141.html?spm=a2g0o.detail.0.0.6e387521WVkdyx&gps-id=pcDetailFavMayLike&scm=1007.12873.83260.0&scm_id=1007.12873.83260.0&scm-url=1007.12873.83260.0&pvid=4bf5db87-87ef-4864-92a2-fbe82246e5b1
Hi! Thanks for the video. I have a xh18 display. I can't find the information on internet on how to connect the wires to it. Do you have a link? Thanks
Hi. Thanks for your videos. It was your review of the TSDZ2 motor with OSF that put me on to this option, and I'm glad I went this way. I'm wondering if you’re happy to flash other people’s motors? I have a TSDZ2 with an 850C display fitted to a recumbent trike. I want to update the OSF since I'm finding the version I have a bit buggy. Usually, I'm confident around this kind of thing, but after watching this video, I'm worried about taking the wrong step and ending up with a dead trike. Are you in the Sydney/Newcastle area?
Sorry no I'm in Melbourne and I don't know anything about the 850C. They usually talk about the 860C but I have only ever used the kt-lcd3. You are better off asking in the forum. I would update to the new MrBrusa firmware rev 20.1C2 look up TSDZ2 for all displays in endless sphere.
Just in case you are wondering the new display does come with a long cable. Some thoughts are that you can tuck n the old connector to the motor housing and splice into the existing wires on the controller so that we don’t need to cut any wires at all !
Hi, I just tried to update my LCD3 but unfortunately I got some errors: Error : Cannot communicate with the device ! Check the SWIM cable connection and check all the needed pin connections on the SWIM connector. If the application code uses Swim Disable and Reset pin as Output or has disabled SWIM Clock Divider: Try Now to SWITCH OFF and ON the application Power Supply while NRST Reset pin is forced low. Error : < PROGRAM MEMORY reading failed. Error : < Operation aborted. Do you know how to solve that?
Make sure you are using a short cable. Also check you are using the correct software and select the correct protocol 105x6.. Are you getting power to the LCD ? Did you wipe the options tab first like in the video ? Your drivers may not be loaded properly. Use this as a guide. www.eco-ebike.com/blogs/eco-cycles-instructionals/tsdz2programmingfromscratch
Yes not with this version but you need to flash the motor controller too so they can talk to each other so long as you have a KT controller casainho also has firmware for that
thank you very much for your quick reply. this is the driver model I have, I suppose by your answer that it will be compatible driver - "KT60SVPRCKD-JLS01" bought in conjunction with kt-lcd3 "60V 2500 W-3000W 60 Amax DC Brushless Motor Controller Ebike LCD3KUNTENG sine wave Controller + KT-LCD3
I want to flash my vldc6 but the whole process is too complex
Hi John/JB,
I have watched several episodes on when you trim the Tongsheng TSDZ2. To do what you have done seemed too complicated for me! I decided to take a short cut. It cost money and didn’t work …
I bought the yellow box from Eco-ebike and used the APT burn tool with the latest bootloader from github. Result: The display is frozen and the screen reads: Keep pedals free and wait
I have invested a lot of time to fit the motor to a nice frame and really hope there is a fix.
Ciao, Peter in Göteborg, Sweden
Hi Peter I’m sorry you are having problems. All I know is what is in my videos and the ktlcd3 display. Seems you have used an 850 or 860 so you need to follow the casainho 860 thread. Let me know if you can’t find it. Alternatively the guys at eco bike are very helpful maybe speak to them first. As always I recommend you try the stock motor first to make sure it actually works. I don’t know how to flash the 860 it seems hard to me I don’t think it’s worth the trouble. Maybe just go back to the stock display and use the mr brusa early firmware like c2. It uses a Java app to make all the changes.
hi! do you recognize my problem?
since i wrote i have tried to flash the display with the settings shown in part two (with an off the shelf bootloader), but st visual programmer givs the error message ”cannot connect to target”.
@@jbalatutube
Thank for generously sharing your work and for answering, even
when you since long have moved on to new experiments!
@@peterwockatz6772 there are 2 possibilities maybe the cable is too long from motor to dongle. Mine is only 20 cm. Maybe use 3v line instead of 5v. Also it could be the pc. Windows 7 works better. One more thing maybe wiring is not right or your stlink wiring is labelled incorrectly
Ok so i had been running this firmware and setup for a while, i had a issue with my battery and it has bricked the software so how. after replacing both the lcd and the control unit in the motor i still can not get it to power on, any ideas?
Try a different battery
@@jbalatutube The battery is only part i can confirm is working still, have checked with charger and quadcopters. Thanks for your input though. Do you know anywhere in the uk that could help?
@@kennethcartman473 no I’m in Australia sorry. You can try flashing the mr brusa firmware and see what happens. endless-sphere.com/forums/viewtopic.php?p=1664848#p1664848
@@jbalatutube Thanks will try. :)
Do i have to use the different Display if i Want to use the open source Software?
did you use kt-lcd3u or the kt-lcd3 i've seen usb addition on the kt-lcd3u but not kt-lcd3
Hi... Do you know how to copy a program from a broke lcd3 display to a new one ?
I’m pretty sure the original firmware is right protected so no, but the Opensource stuff is free to download so no need to copy, just need to match the version with the tsdz2, recommend v20b1 it went on very easy
I am just wondering why the stm programs seem to vary? I dl'ed from the link given on gethub and it is a "utility", whereas eco-ebike gives links to a complete toolset with a different looking program utility. the latter never installs properly, in that I always get a failure of some type. any ideas? im on windows 10
Is there someone able to answer to the question from Ronans Tab ? I'm also interested to know wich connector part number is required to connect the ST link Cable to the display PCB. Does it need to be soldered or just plugged in ? Thanks !
Ok, found, i answer to myself : fr.aliexpress.com/item/32885532141.html?spm=a2g0o.detail.0.0.6e387521WVkdyx&gps-id=pcDetailFavMayLike&scm=1007.12873.83260.0&scm_id=1007.12873.83260.0&scm-url=1007.12873.83260.0&pvid=4bf5db87-87ef-4864-92a2-fbe82246e5b1
Just solder your own connector whatever you have sitting around
Hi! Thanks for the video. I have a xh18 display. I can't find the information on internet on how to connect the wires to it. Do you have a link? Thanks
You can only flash the ktlcd3 otherwise you need the Marco firmware. You flash motor only and change settings with a java front end
Hi. Thanks for your videos. It was your review of the TSDZ2 motor with OSF that put me on to this option, and I'm glad I went this way. I'm wondering if you’re happy to flash other people’s motors? I have a TSDZ2 with an 850C display fitted to a recumbent trike. I want to update the OSF since I'm finding the version I have a bit buggy. Usually, I'm confident around this kind of thing, but after watching this video, I'm worried about taking the wrong step and ending up with a dead trike. Are you in the Sydney/Newcastle area?
Sorry no I'm in Melbourne and I don't know anything about the 850C. They usually talk about the 860C but I have only ever used the kt-lcd3. You are better off asking in the forum. I would update to the new MrBrusa firmware rev 20.1C2 look up TSDZ2 for all displays in endless sphere.
@@jbalatutube No worries. Thanks mate 👍
Just in case you are wondering the new display does come with a long cable. Some thoughts are that you can tuck n the old connector to the motor housing and splice into the existing wires on the controller so that we don’t need to cut any wires at all !
Hi,
I just tried to update my LCD3 but unfortunately I got some errors:
Error : Cannot communicate with the device !
Check the SWIM cable connection and check all the needed pin connections on the SWIM connector.
If the application code uses Swim Disable and Reset pin as Output or has disabled SWIM Clock Divider:
Try Now to SWITCH OFF and ON the application Power Supply while NRST Reset pin is forced low.
Error : < PROGRAM MEMORY reading failed.
Error : < Operation aborted.
Do you know how to solve that?
Make sure you are using a short cable. Also check you are using the correct software and select the correct protocol 105x6.. Are you getting power to the LCD ? Did you wipe the options tab first like in the video ? Your drivers may not be loaded properly. Use this as a guide. www.eco-ebike.com/blogs/eco-cycles-instructionals/tsdz2programmingfromscratch
fantastic videos, it is possible to do in a kt lcd3 but with rear HUB engine. I'd appreciate your help. greetings from Spain
Yes not with this version but you need to flash the motor controller too so they can talk to each other so long as you have a KT controller casainho also has firmware for that
thank you very much for your quick reply. this is the driver model I have, I suppose by your answer that it will be compatible driver - "KT60SVPRCKD-JLS01" bought in conjunction with kt-lcd3 "60V 2500 W-3000W 60 Amax DC Brushless Motor Controller Ebike LCD3KUNTENG sine wave Controller + KT-LCD3