ANSYS Fluent Tutorial : Fluid Flow In a 90 degree Bend Pipe | ANSYS 2019 R2 Tutorial
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- There is a 90-degree bend pipe. The pipe outlet velocity variation at different bend radius has been shown. Water has been taken as the working fluid in this analysis.
What You Will Learn from this tutorial?
Application of new plane creation using point and normal options.
Inflation layer setup in Meshing.
Solver Set up for turbulent flow modeling.
Output parameter setup.
Please Subscribe to our channel and press the bell icon for notification regarding our upcoming Uploads.
Our Facebook Page: / ansystutor7
Telegram Group: t.me/ansystutor
#ansystutorials #ansys2019R2 #CFD - วิทยาศาสตร์และเทคโนโลยี
The best youtube source for ansys tutorial, really I learned many things from your youtube channel, keep posting, GOD Bless you.
Thank you Mihir, 🥰🥰🥰
your videos save my life, thx
You are most welcome:)))
thank u teacher best information
Thank You Yad :)
Thank you so much 💓 for your help
Please tell me the velocity inlet must be superficial velocity or phase (actual) velocity ?
Actual velocity.
kindly post videos about "Numerical Investigation of Swirl Flow in Subsonic Nozzle" in ansys CFD or Fluent..
Will try to make a video. Thank you for the suggestion.
thankyou so much
You are most welcome.
Hello , can you do a earth pipe heat exchanger Analysis ?
A pipe is buried under the ground , for given inlet velocity and temperature at inlet we have to analyze the temperature distribution along the pipe. It also has the bend twice as you've shown !
th-cam.com/video/LdkBLwm8T5o/w-d-xo.html
Why didn’t you model the pipe geometry outside the fluid domain? Isn't it necessary?
What if I want to add heat to my pipe flow, can I also simulate that without outside pipe geometry?
Hello, so i've been following this tutorial exactly as shown in the video, however, when it comes to the point of doing the sweep it doesn´t work properly, perhaps i'm doing something wrong, i select the profile and the path like you do but it doesn't make the sweep right
I'd love if you could help me with this problem.
Thank you very much in advance
Hello Jose, Check the 2D curve you have created, it might not be linked with each other or there might be gap, zoom in and check near the joints for straight line and arc, if the curve is ok , then check whether there is any point or line on the profile curve. Check and comment if problem get solved or not.
Hello sir ! I am confused on when and why to use fill option from tools in geometry ?
Fill option is to create the internal domain of any passage , its a just geometry creation tool, it dont affects the solution.
@@AnsysTutor thank you 😊
You are most welcome.
Hi Sir! How in this pipe model to look at the heat losses during steam injection with the help FLUENT? Can you help?
You need to use multiphase modeling for this.
Hi sir,
While solving there is reverse flow,
May I know what is that meaning?
There is a problem in the mesh that might be causing this problem. Check the skewness and orthogonal quality.
hello i face a problem that when meshing keep stuck 5%
what can i do?
What is the error message. Are you using a student version.
Hi
After updating the solution the result box did not get checked.
Plz provide a solution
th-cam.com/video/GsLeh9i-nbI/w-d-xo.html
First viewed by me
Thank You Srinivas :)
@@AnsysTutor can you please guide how to start cfd learning from scrap i.e basics and tool knowledge
Start the basic from the 2D tutorials from Cornell University fluent tutorials, then you can go through the numerical simulation course in edx. These will build your basic understanding of ansys .
Are your z and x velocities auto generated in the initialization stage, or have you manually put them in? If so, how did you calculate them?
These were auto generated by the solver according to the inlet velocity data.
تشکر
Where is the video in which you create plane with point and normal?
Can you please tell me how to create n numbers of plane in bend part
th-cam.com/video/2KhVBaqpOlU/w-d-xo.html
You can create the planes using there coordinates. Alternatively you can use the animation tool to observe all the contours along any domain.
Brother is there anyy video in which you create planes in bend i.e from inlet to outlet of bend you creates n no of planes?
Currently there is no video, will try to make one. What is your objective behind the creation of such numbers of plane.
@@AnsysTutor i am working on it in which i have to plot pressure and velocity contour between bend inlet and outlet for n of planes
Is this the latest version?
Latest version is ANSYS 2021 R1.its 1 year older version Ansys 2019.
Is there a difference between the 2019 version and the 2020 version ??
Yes, there are some new features like "named expression", o-grid meshing , etc are added in latest versions.
i am not getting option of bent radius in parameter......... .how to get it??
You should first put the radius dimension first. Then in the details of sketch table you could get the parameter change.
@@AnsysTutor if i imported from SW then what to do??????
You cant parameterize it in ansys design modeller.
Dear Sir, How can we set thickness of pipe ?
You can put the thickness at the wall boundary conditions.
@@AnsysTutor Thank you :)
How can I add two phase flow with this tutorial thanks?
For two phase flow you need to select the multiphase model option. I would suggest you to watch our two phase flow playlist to get the idea about how to setup the flow.
ANSYS Fluent Multiphase Flow: th-cam.com/play/PLykANdmho34yKlKLPM3MWr-C8B-2v0cJH.html