No I did not. As stated in the video I am hoping they are all in working order still as they were when it was parked. I plan on getting the blad on this week and operating by this weekend. If I have any leaks or issues they will be addressed then and if I ha e to rebuild 1 or. Oth cylinders I will make a video. They are pretty simple and don't require any special tools.
@@RustyWrenchRestorations Thanks i got a leak down somewhere I think it in the cylinders. There is no leaks in hoses they are relatively new. I went through valves put all new prongs and seals. I even found NOS cases. I was told they were worn out. It slowed it up but still leaks down just not as fast. I know the cylinders kits are expensive
th-cam.com/play/PLkNxN7DZXVR5rtThkHTjNswcBo324hnSq.html&si=CZRHlLGK-kbxm7xz Here is the libk for when I rebuilt the 420 cylinders. They are a different design than what's on the 430C
@daridley is it for a 62 vlade like this one? I've had luck taking them apart and bringing the internals to a good hydraulic shop.... they measure the seals and orings and I got the parts fairly cheap. Sometime there are good kits online also. If your cylinders are loosing pressure and there are no external leaks then yes... they need to be rebuilt. Be careful with new old stick items... though new or never used they can deteriorate over time.
@@RustyWrenchRestorations thanks for that’s. I’ll get to it one day. It’s for a 62 blade. I’m going to try it first I think I could do it. I know someone in the heavy equipment filed that can help. Thanks for all your information. I looked at video. My cylinders and different. They are like ones you are working on now. I got rebuilds kits for them recently. If they aren’t any good I can return them. Thanks again
![Repairing a Backhoe Hydraulic Valve Block on a 1978 Dynahoe 160 [Dino Part 12]](http://i.ytimg.com/vi/HNrAJOT7Tbk/mqdefault.jpg)
great explanation bro...i just had memories from A and C school in Great Lakes.
😂😅
Can't believe this project is almost done. 😮
Good explanation of the hydraulics
@Jason1Pa got the lade frame on and hydraulics bled today.... blad goes on tmw... hoping for blade install video upload tomorrow night or Friday
Did you rebuild the cylinders. If you did how hard are they. I got to do some. And did you rebuild controls also.
No I did not. As stated in the video I am hoping they are all in working order still as they were when it was parked. I plan on getting the blad on this week and operating by this weekend. If I have any leaks or issues they will be addressed then and if I ha e to rebuild 1 or. Oth cylinders I will make a video. They are pretty simple and don't require any special tools.
@@RustyWrenchRestorations Thanks i got a leak down somewhere I think it in the cylinders. There is no leaks in hoses they are relatively new. I went through valves put all new prongs and seals. I even found NOS cases. I was told they were worn out. It slowed it up but still leaks down just not as fast. I know the cylinders kits are expensive
th-cam.com/play/PLkNxN7DZXVR5rtThkHTjNswcBo324hnSq.html&si=CZRHlLGK-kbxm7xz
Here is the libk for when I rebuilt the 420 cylinders. They are a different design than what's on the 430C
@daridley is it for a 62 vlade like this one? I've had luck taking them apart and bringing the internals to a good hydraulic shop.... they measure the seals and orings and I got the parts fairly cheap. Sometime there are good kits online also. If your cylinders are loosing pressure and there are no external leaks then yes... they need to be rebuilt. Be careful with new old stick items... though new or never used they can deteriorate over time.
@@RustyWrenchRestorations thanks for that’s. I’ll get to it one day. It’s for a 62 blade. I’m going to try it first I think I could do it. I know someone in the heavy equipment filed that can help. Thanks for all your information. I looked at video. My cylinders and different. They are like ones you are working on now. I got rebuilds kits for them recently. If they aren’t any good I can return them. Thanks again