Ford Ecosport 2012-2018 how to fit a dash cam simple step by step guide
ฝัง
- เผยแพร่เมื่อ 1 ม.ค. 2018
- This video walks you through fitting a dash cam to your fuse box so that the camera goes on and off with the ignition.
I have kept the video as short as possible but made sure each step is covered.
Any questions just pop them in the comments section below. - ยานยนต์และพาหนะ
![The Wall Song ร้องข้ามกำแพง | EP.202 | ตั้ม วราวุธ / เบสท์ คำสิงห์ | 18 ก.ค. 67 [1/5]](http://i.ytimg.com/vi/cwIoA7XHqnE/mqdefault.jpg)
Very helpful video PJ. Thanks!
Make a video on best modification for eco sport or any best accessories for it...🙏
I agree, a very clear video, easy to follow. I too have a hardwire kit to fit to a 2018 Ecosport. There are three fuse boxes: battery, engine compartment and behind glove box. Many different sized fuses, only one or two same as kit spurs but not for accessories. Also, the spur fuse holder is too big to fit in alongside other fuses.
Can you recommend a solution?
If you can't fit a double spur then maybe try this sort of thing?? (make sure to get correct rating)
www.halfords.com/workshop-tools/garage-equipment/fuses-electricals-fixings/halfords-fuse-mini-blade-with-breakout-wire-20-amp-hfs282
Thanks for this! Does this work for a 2020 EcoSport and what camera/cables did you use?
Great video man!!!! Can you do also on how to replace the cabin filter for ecosport? This would be a very big help!
The next time I get an Ecosport in I will a quick vid on it.
PJs projects
Thanks a lot! Really a big help...
How do I get to the fuse box the manual say remove 4 screws but I can only see 2
Abotu 5 minutes in I realized he is doing this on the passenger side :)
Has anyone managed to do this with a 2019 model? The glove box fuse board is extremely tight and the only switched fuses seem a bit too important to start piggybacking off. Any ideas which one to use? Think I might have to go to the engine compartment fuse box...urgh..
Great video i am trying to fit one to a 2018 ecosport the fuse box is under the glove box and has fuses which i have never seen before the small ones are really small the rest have 3 connectors, which means the connecters that came with the kit are no good. Have you any suggestions please.
Yes it's a pain with so many types now available. Fuse spurs are available for all types of fuse so it's just a case of identity.
I'm guessing yours are these type -
www.halfords.com/workshop-tools/garage-equipment/fuses-electricals-fixings/halfords-2-micro-prong-fuses--5-7--5-10-15-20-25-30amp
www.halfords.com/workshop-tools/garage-equipment/fuses-electricals-fixings/halfords-mini-assorted-prong-fuses--7-5amp-10amp-15amp
PJs projects yes they are right thank you. Where are spurs available with the same connection as the next base. Thanks again.
I agree, a very clear video, easy to follow. I too have a hardwire kit to fit to a 2018 Ecosport. There are three fuse boxes: battery, engine compartment and behind glove box. Many different sized fuses, only one or two same as kit spurs but not for accessories. Also, the spur fuse holder is too big to fit in alongside other fuses.
Can you recommend a solution?
What number fuses did you use?
Sorry but this was five years ago and one of hundreds of vehicles I would have worked on that year so I have no idea which one was used.
As mentioned in the video you are best checking with a meter which fuse to use.
Nice video... Too much ouchch if you have brand new car :-)