ฝัง
- เผยแพร่เมื่อ 14 พ.ค. 2022
- I grabbed a new Uniden iGO Cam 90R and set about installing it in a new Kia Seltos - don't let the cable dangle down from the dash, you can tidy things up with your own installation. Let me show you how to hide the cables powering your dashcam. It's easier than you think
- วิทยาศาสตร์และเทคโนโลยี
Thanks so much for this great video. I had my reservations about routing the cable throught the trim but now I have seen how you did it, my faith in my own ability has been restored! Thanks so much for your help!
Thank you, you made it simple and easy to duplicate. It took me about 30 minutes to complete, front and rear camera. The wires just tucked right in from the front to the back in my Subaru Forester
This video made me feel much more comfortable with putting the wire throughout the car. Thank you!
Thanks so much for sharing this installation. At first we thought it might be too difficult to do it this way but after watching your video my husband had it done in about 20 to 30 minutes. Thanks so much. We also have a Kia Seltos. So far we love it.
You realise that this will effect the safety of the airbags, there are safe ways of installing one. You’re basically going to be playing Russian roulette if the airbags activate
@Just Shibal can explain what u mean please? I'm not sure where that cording would affect my airbags. Sorry if I sound ignorant but I don't see how that little cording would mess with my airbags. Thank you.
@@charlottehaeckl4576 the rear camera cable should ideally be routed along the bottom of the cabin. That usually requires removing some plastic trim below the doors. There are some other videos showing that.
@@charlottehaeckl4576 what he means is, airbag is deployed with significant force, if the cable is in its way it can pull the camera off the window right in your head
This dash cam install is very much like how I did mine. I installed a front and rear Garmin 57. Worked out very well.
Easiest video to follow, was able to install quickly. Very clear directions!
Thousand people did the same think hard way but you show us very easily .Thank you
Amazing! Easy explanation! Just got mine and needed help installing! Thanks mate !
Great video. I just installed mine and followed the same principles of hiding the cables. Looks great!
Many thanks for this - much easier with your guidance than I anticipated!
the window pillar plastic trim (white in the video) just pulls off, grab it at the top and pull it towards you, it will pop off and the cable can be routed behind it, modern pillar trims have channels for wires built in for cameras, cabin lights, speakers, microphones etc, to refit just line up the holes with the locating lugs and slowly push it back into place, try not to push the wires into gaps with tools as squeezing wires in with tools can damage the wires, if you need to push any wires into gaps use some folded up card as that will not damage any wires, I've fitted four front & rear view cameras now and the first one I fitted I damaged the internal wires by pushing it in with a stiff plastic tool and the rear camera would not record anything, I could view the image but not record it so I had to buy a new cable and then it recorded, but to look t the cable you couldn't see any damage, so think before you use any pressure on these cables, the internal wires are very thin, just a few strands and easily broken, hope this helps anyone about to fit this type of camera, it is a good video just needs a few weeks,
Loved the front installation but wish you had done the rear wiring as well
Brilliant video. This is the Best video I’ve seen on this topic. Thank you so much, you have given me the confidence to have a go. Really grateful.
Thank you for the Installation share and how to easy hide the cables this help me a lot! 💖
Thanks 🙏 such a helpful video. I have never known how easily it is until get into it.
best instructional video ever. Thank you Sir.
Best presentation hands down 💯 thank you for this guide ✌
Thank you so much for this! Took me like 5-10 minutes, and it was so easy! Some advice I have - do it on a warm day, or in a warm place. The plastic was nice and flexible because it's 25C today
Think I'll leave the car to bake a bit in the sun. Thanks for the tip!
Don't do it with the AC on
Probably better with the heater on.
This video was very helpful thank you.
Thank you for sharing this content. Huge help!
Very well explained. Thank you so much!
thank you for your sharing, very good instruction for beginners
First time I seen your channel
Some really good video and good advice brilliant 👍🇬🇧
Very useful tutorial. I've just hidden my camera cable in Mazda 2 and it looks awesome!
So much better, horrible having cables dangling around!
Thanks for your video I was able to install both front and rear cam......I really appreciate it. Nice video. Am from Jamaica 🇯🇲 u save me alot.
Thanks a lot for the video, it works wonderfully.
Nice tutorial sir...btw,mind sharing what kind of phone holder you are using now?
Most modern cars have airbags under the a-pillar trim, I don't think it is a great idea to tuck your wiring up under the rubber like that. You can pop the trim off and run the wire above the airbag but you need to know what you are doing. There is a clip that retains the trim if the airbag deploys, if you don't know how to remove them you shouldn't be attempting it.
I think it is bad advice to suggest anyone puts anything between the airbag and the occupant who will be sitting in that seat.
Great work.very helpful
Trev, I am wondering how you fitted the long cable to the rear camera? All new cars have side curtain air bags fitted, what are the problems/dangers of pushing the cable along the door opening trim above the doors where the side curtain air bags are fitted?
Just what I was looking for. Tidy.
Simple installation, could be better with an actual hard power wire to the fuse panel to run only when engine is turned on. As for a rear camera, just run the rear camera wire as he did for the cig lighter wire and then run the rear camera wire to the rear under the rubber seal.
Be careful of the placement of the wire on that a-pillar. If there is a air bag under the molding with the wire may restrict the deployment of cut into the bag upon deployment and it will not deploy correctly. Since this is the UK there may not be an airbag in that pillar. If there is an airbag in the pillar just remove that a-pillar trim molding and run the wire UNDER the airbag,.
Under, as in behind the airbag?
@@andrewwoodward9165 maybe he means under as in vertically below the airbag
Thank you!
I was wondering what to do, as my vehicle only has usb-a and usb-c in the front (no power port), and they are both being used. There ARE two: one at the back of centre console, and one WAY at the back near the hatch.
Thought about using the fuse panel and that’s what I was looking for. But not sure how (hot to fuse, black grounded to metal?).
Maybe splice into the rear console power at the front of the console?
This video isn’t in the UK. He has an Australian accent. Also, the UK and Australia aren’t third world countries and they need to meet similar safety standards as the US, so yes there are definitely airbags in those a-pillars.
Airbags are more than strong enough to burst through these wires, they will not mess with the deployment.
Thanks for taking the time to do this video. I was hoping you would show installation of the rear camera because it comes with a long cable and I have a small car so I've ended up with several feet of extra cable. How do you handle that to hide it? I've run the cable through the passenger side and now those loops of extra cable are tucked up on top of the sun visor when it's in the up position but of course, that's out of sight this minute but won't work when I need the visor down (a LOT of the time). Do you have a solution?? thanks
Waiting, too. 😮
Great video. I did mostly the same thing just now after watching your install except in a Kia Soul.
Glad to see someone else did this with a Kia Soul. Lets me know if I can do it with mine as well.
god i fucking hate kia souls
Nicely done sir.
I have installed 2 different dash cams. However my new truck has the 12v supply on the top of the dash. How do hide or secure the wires on the top of the dash so it doesn’t look just placed there
Thanks! I’ve been driving with dangling cable for 2 years, for no good reason apparently
What is that little tool called, if I want to order one on Amazon ?
Best guide! thank you
absolutley amazing
Thanks for uploading this 👍
Do you have a video showing how to install a rear camera?
really great help thanks muchly!
Thank you so much!!
Will doing this effect the seals on the car at all?
what model of camera you used?
Well done - thanks.
Good job Sir - Save me some money by doing my self. Thanks a bunch .
Saves you money for sure, but it does need to be done safely. But paying someone to do it doesn't guarantee a safe job will be done. I had someone ignore the airbags (and telling me that my 2017 VW Golf didn't have side airbags) and wiring it to be always on, which would have done great things to killing my car battery. And they wanted $220 for doing the job.
thanks i did it ! i was not installed more than one year lol it was in front of the middle mirror
What about side airbags, is this going to cause an issue?
Well... that WAS easy!
I didn't even need a tool, just jammed it in with my fingers.
Didn't think it would be that easy, thanks!
Correct me if I am wrong. You have installed the wire on the A Pillar over the curtain airbag. This will interfere with the deployment of the curtain airbag and is a safety issue.
excellent video mate , same is U3000 Dash cam?
I hard wired my dash cam using an add a fuse but no power. The fuses are good, cable is brand new and wired up right. One to the fuse, one to ground. What am I doing wrong?
What’s the little tool you use to help stick in the wire thanks
It's a small piece of plastic that most dash cams ship with. If you don't have one, the back of a plastic spoon will do just one as long as it isn't sharp. A sharp pry will ruin the cable and parts of your car.
wiring that router over around the A-pillar is a big no-no as the pillar airbag once deployed, the wire wound be flying off like a bullet..... only run the wire along the windshield and A-pillar seam......
I think if the airbags go off the cable is the least of your worries 😂
Can't even spell would.
Nice watch ,what make is it
Take the extra time. A dash camera takes me minimum 1 to 2.5 hours on average (if there's a rear camera). Take apart more panels and don't run wires in front of side curtain airbags.
Bro, you are amazing 🤩🌹
Class. Easy. Thanks
Good job sir
how long was your cable ?
I have the same camera but different "brand". I would say that being taller, I mounted higher and not centered; its a wide angle lense, so dont be too specific about being center.
Just what i was looking for except your steering wheels on the wrong side 😮
what's the tool you are using?
And for 360 car surveillance, when parked?
Thanks... no accidents for me..
Solid vid cheers
How do you power the back camera though
It plugs into the front camera
Can you do another video on reverse cam setup please?
The single cable connecting the rear to front camera supplies both power and video.
Thank YOU !
Thanks boss !!!
What kind of camera is this?
What brand of camera is that Sir? Thanks
He said it's a Uniden
Incredibly usefull. So much for that.
I don’t like this type of dashcam that plugs into the 12v. It means that it's only on when the car is turned on since power is cut off to the accessories when the car is turned off. If you have a dashcam that has a monitoring mode when parked, you have to hardwire it to the fuse box.
Nice work. This can be avoided by having a USB port in the rear view mirror like some cars have.
What do you think of the Seltos?
Like everyone can afford to have a car with a usb port in the rear view mirror. I’m sure this on very new cars only
Is there no wireless options that you can just charge???
can we see installation of the rear cam please
would have liked to see wiring the back camera
Its like a Sirius XM antenna install. I have never done this or been able to hide the wires. Its just out there. Get a cheap Dash cam and don't break the bank, a risk but you have to live
Thanks 👍
thanks trevor
1:32 mins (
Where can got Camara security from Camara back Camara with the 24.7 cable to fuse
Hi guys just quick? rear camera required separate memory card? Cheers
No, single memory card in front of
Won't the hot sun hitting the windshield loosen the sticky pad that the dash cam is mounted on?
Those 3M pads don't mess around, not your run-of-the-mill double sided tape...
I can't find a decent phone holder for this reason. All pop or slide off and never permanently stick.
Most cars don't have cigarette lighters. And where do you plug your rear camera to?
All cars have a 12v port which is what the cigarette lighter is now called and used as and the rear camera feeds through from the front to the back
Great I was afraid to go on that corner on the roof to the door
Pop the A-Panel off and put the wire behind the airbag dude. If the airbag deploys someone's going to get messed up really bad...
This is important! Cable/s should be placed behind any air bag. Its reasonably easy to remove the pillar cover (just check a youtube vid).
Routing the cable properly and hiding behind the glove box makes a professional job all round.
I generally like your work Trev, but seriously you should be putting the right message out there to the public.
If your not confident to do it properly then get an expert 🙂
Almost thought I finally found the right video of how to hide cable. I can't figure out installing the rear camera; how to hide cables along side interior and at the rear window or outside by the plate. 😢 Guess I'll keep searching. I shouldn't have to pay an expert over $100 to install.
2:34 One of these' i didnt get one 0 what is it please?
How would you hardwire a dashcam? I did something wrong and my battery discharged :(
get a 'double blade fuse wire tap' and then...find a fuse in your fuse box that is powered only when ignition is turned on. replace into holder and add dashcam fuse..connect earth
@@Robroscob Proper hardwire kits have a circuit that will automatically power off your dashcam when in "Parking Mode" if the car battery drops below a certain voltage.
Great
I will now install like this in my Kia Optima
Whats KN?
Thank you, saved from the hassle of opening the a pillar.
Is there any that can be taken out and charged in the house of a night?
The battery is only a back up.
Great video Thanks for posting it. BUT you really need to return that car. The factory put the steering wheel on the wrong side !
this is Australia, we drive on the right seat
Lmao
I know right! He needs to return that car ASAP.
@David Feery-Richards no the real idiot is someone who doesn't realize it's a joke....
can it only record when the engine is on ? how do you record when it’s off, what if someone walks by and scratches your car, then you can’t capture it ?
Some cameras have internal capacitors that allow them to record while the vehicle isn't running
Hardwire it to battery using wiring kit. Most goes to fuse box
Show us the back installation jeso😮😮😮
Mine has 3 cables, and air bags in windshield posts, not going to mess with that.