bro , i was searching for the opposit , my laptop's mic keep picking up audio from pc while recording Example : i'm recording a video while listning to music ( i dont want the music to be a part of the video ) but my mic records my voice with the music , you understand what i mean ? Thats my problem , and i want to get rid of it , i asked AI and he suggested me to use Virtual Audio Cable PLEASE HELP!
same problem but even worst i tryed to remove vb cable but it still is here so basically i wanted to have a shity mic now i have 16 new audio that are useless that i don't know how to get rid off vb cable doesn't have anysound what so ever and wanting to remove it is a no go because it doesn't fkin change anything
This is how I record with the Virtual Cable Audio driver via Adacity. It's just that during recording I can't hear what I'm recording because even though I have Virtual Cable input set by default in playback, there is still silence in the speakers
@@DEU-BRUNDO Yes, but this option only works when the material is already recorded. However, I need to have auditioning also during recording (in real time) and in the following setting: Cable Input (VB-Audio Virtual C, Speaker/Headphone(Realtek High...)/Microsoft Output audio mapping I cannot activate listening in speakers during recording. Sound Settings: Interface - Host: MME, Playback - Device: CABLE Input(VB-Audio Virtual C. Recording - Device - CABLE Output (VB-Audio Virtual. Channels - 2 (stereo). Quality - sample rate 44100Hz. Default sample rate 44100Hz. Default sample format - 32 bit float Buffer size 100m/s Delay compensation -130m/s REGARDS Tom
@@DEU-BRUNDO Thanks a lot. Finally it started working. Previously, I also set in recording - Listen to this device, but I chose Cable Input (Virtual Cable ....) instead of - (Speakers/headphones ...) THANKS again. REGARDS Tom
@@DEU-BRUNDO APPROX. I made the settings you suggested and everything works fine. th-cam.com/video/m2FEnQz7dc8/w-d-xo.html Thank you very much. Best wishes Tom
i can't hear anything once i set the cable input as my default. other peopel set it as theri default and are still able to hear why? and if i set it back to my headphones i can hear, but the cable doesn't
bro go to control panel > sound> recording> cable output > listen and there will be listen to device tick the box and select ur headphones or speaker then it would work
go to control panel > sound > recording then pick the mic your going to use then double click the mic then go to listen tab and tick the box which says "listen to this device" and then play back through this device and select the "cable input vb audio cable
how do i use it I want to use my mic (aux cable mic) And I dont have headphones when I plug - in My mic the audio gets cut off i thought THis is Audio splitter will it work how i want :I want to use the aux cable mic and Hear the sounds of game so I can record vids :)
@@hassanrizvi9291 bro just go to control panal > sound > recording > Now do 'double tap' or 'right click' on ""Cable Output"" and go to properties > Now go to ""listen"" now activate ""listen to this device"" and 'select device' and then tap 🆗 that's it... thank me later...
@@altmashali1030 thanks so much you are the best.. i've been sufering from this problem ever since i downloaded the app which is like a few hours ago lol
Exactly it's due to virtual audio cable because you set this as a default when you set another device as a default then you can hear laptop or PC voice
Same shit every where I look. I install Virtual Cable A and B a blue and gold. It does not give me a main silver output one like here and every other video. So WTF!
![TOTAL Control of your Audio in OBS | Virtual Audio Cables [2022]](http://i.ytimg.com/vi/Z-GnOZhaXTk/mqdefault.jpg)
![TOTAL Control of your Audio in OBS | Virtual Audio Cables [2022]](/img/tr.png)
Que raio de vídeo é esse.
Instruções para quem já sabe....
i just love how they left in the youtube tutorial tab open that they watched before the video
bro , i was searching for the opposit , my laptop's mic keep picking up audio from pc while recording
Example : i'm recording a video while listning to music ( i dont want the music to be a part of the video ) but my mic records my voice with the music , you understand what i mean ?
Thats my problem , and i want to get rid of it , i asked AI and he suggested me to use Virtual Audio Cable
PLEASE HELP!
what i need to do if im missing 'inf' flies?
Amazing tutorial! Thanks for the great information!
Glad it was helpful!
It's not detecting any sound. Please help
same problem but even worst
i tryed to remove vb cable but it still is here
so basically i wanted to have a shity mic
now i have 16 new audio that are useless that i don't know how to get rid off
vb cable doesn't have anysound what so ever
and wanting to remove it is a no go because it doesn't fkin change anything
This is how I record with the Virtual Cable Audio driver via Adacity. It's just that during recording I can't hear what I'm recording because even though I have Virtual Cable input set by default in playback, there is still silence in the speakers
Go to recording, and then go to the properties, select the listen tab and press listen to this device
@@DEU-BRUNDO Yes, but this option only works when the material is already recorded. However, I need to have auditioning also during recording (in real time) and in the following setting: Cable Input (VB-Audio Virtual C, Speaker/Headphone(Realtek High...)/Microsoft Output audio mapping I cannot activate listening in speakers during recording. Sound Settings: Interface - Host: MME,
Playback - Device: CABLE Input(VB-Audio Virtual C. Recording - Device - CABLE Output (VB-Audio Virtual. Channels - 2 (stereo). Quality - sample rate 44100Hz. Default sample rate 44100Hz. Default sample format - 32 bit float Buffer size 100m/s Delay compensation -130m/s REGARDS
Tom
@@DEU-BRUNDO Thanks a lot. Finally it started working. Previously, I also set in recording - Listen to this device, but I chose Cable Input (Virtual Cable ....) instead of - (Speakers/headphones ...) THANKS again. REGARDS
Tom
@@DEU-BRUNDO APPROX. I made the settings you suggested and everything works fine. th-cam.com/video/m2FEnQz7dc8/w-d-xo.html
Thank you very much. Best wishes
Tom
@@DEU-BRUNDO where i cannot found recording settings
when i installed vb cable driver my laptop mic(array realtek) has stopped working and i cant use it,why?
you should set array realtek mic as default mic . then your problem will be resolved.
this didnt work for me, i did that but the problem is, when i enable the vb cable i cant hear anything
Same
i can't hear anything once i set the cable input as my default. other peopel set it as theri default and are still able to hear why? and if i set it back to my headphones i can hear, but the cable doesn't
bro go to control panel > sound> recording> cable output > listen and there will be listen to device tick the box and select ur headphones or speaker then it would work
@@Repost.moviessclips how do i use my mic while thats working tho
go to control panel > sound > recording then pick the mic your going to use then double click the mic then go to listen tab and tick the box which says "listen to this device" and then play back through this device and select the "cable input vb audio cable
how do i remove and re install it tho. remove cable doesnt work and there is an x appearing in the screen
js go to device manager and uninstall it there
One of the best, short and sweet video
You are genuis bro thankuuuu so much
Can we use it on iPhone tho or not. And thanks for this beautiful video bro
Thnk you so much, you saved me from a big problem
3:04 Fast openning Sound window by Window+R then 'Mmsys cpl' (with dot)
I think your background music is cool. 🎧
thank you so much.this video helps me a lot!!!
Thank you so much sir.🙆😊.you solved my big problem..
where i can get that version of Virtual Cable ? 4.3 for free
not sure why it is not working for me when i test it out
I dont understand my output is in playback but the input is in recording
did u find a solution to this
How can I use virtual audio cable for writing live short audios ???
at the end of this video you can see we are writing with the help of virtual cable.
It’s saying Missing ‘inf’ file or Driver package corrupted
Yeah Same
I just want to be able to hear my damn computer while mic spamming on tf2
LMAO same
How do you delete it from your computer
mine says i have it already installed yet i dont
but when i don't have the speakers on the deafault device then i can't hear anything
your pc voice divert into mic input . if you want to hear voice then change default speaker settings.
Thank you so so much, this video is so helpful
what if you wanna hear the sound --
glad I could help you.
Ty man
how do i use it I want to use my mic (aux cable mic) And I dont have headphones when I plug - in My mic the audio gets cut off i thought THis is Audio splitter will it work how i want :I want to use the aux cable mic and Hear the sounds of game so I can record vids :)
bro if i switch vb audio, i cant hear the laptop audio plz help
Dear bro es ka function he yahe hita ha. Voice ap open nhe sun pao gy. Agar ap ny vb audio ko active kea ha to
@@hellodevice693 thnx
Can i use this to WhatsApp call? Or call someone?
@@hassanrizvi9291
bro just go to control panal > sound > recording > Now do 'double tap' or 'right click' on ""Cable Output"" and go to properties > Now go to ""listen"" now activate ""listen to this device"" and 'select device' and then tap 🆗 that's it...
thank me later...
@@altmashali1030 thanks so much you are the best.. i've been sufering from this problem ever since i downloaded the app which is like a few hours ago lol
What is mean by dx.diag?
it wont let me uninstall
same problem
he didnt even show what he clicked to get the download info🙁
Get rid of the damn music. It caused me to lose interest after the first 10 seconds.
is this a safe application ??
yes, off course
Maybe speak in the video to make it actually understandable?
Maybe at the very fucking least add subtitles?
Hello, can anyone tell me if I can use this software to give music to 3 bluetooth speakers and the laptop default speakers at the same time? Thank you
yes u can
Please I need an help. After I extract the files it doesn't come up the option run as administrator. I have got windows 10.
Please help
To create new user in your system and then try again.
@@hellodevice693 I don't know much about computers, please can you explain me better what do you mean for create a new user? Thanks.
Simple search in youtube " How to create new user in windows 10" you will be able to create.
The Best! Thank you !000% A+++
glad I could help you.
this didn't help AT ALL
It perfectly describes how to route desktop audio into the microphone output with a virtual audio cable
now i cant hear anything
revert setting .. vice versa
@@hellodevice693 then the cable doesnt work
I can not install
это ты мне сегодня бургер делал???
i cant hear anything when I use it
Exactly it's due to virtual audio cable because you set this as a default when you set another device as a default then you can hear laptop or PC voice
@@hellodevice693 is it possible I can make it so I dont hear myself
can u tell me how to unisntall it
Follow this method
support.microsoft.com/en-us/windows/uninstall-or-remove-apps-and-programs-in-windows-10-4b55f974-2cc6-2d2b-d092-5905080eaf98
If you are not going to speak, at least delete the stupid music. It's distracting and worthless.
should be open . you can vpn for this
Same shit every where I look. I install Virtual Cable A and B a blue and gold. It does not give me a main silver output one like here and every other video. So WTF!
i cant hear what i play , how to fix it ?
did you figure the problem out because i am having the same issue?
No I just deleted the whole setup 😂