Nice job, I have worked full time with Erbauer 18v EXT tools for the last 3 years and have worked them hard! I'm that impressed I now have about 20 of them at home,only had one fault on the jigsaw and Screwfix swapped it for a new one same day in store, they are all rugged, reliable, powerful and do the job well ,I'm a bit of a snob when it comes to tools ,and although these are at a lower price point they look work and feel quality, out performing some far more expensive brands.
I have Erbauer and I’m going to change brands only because they don’t have a lot of cordless versions or a larger range. I need a cordless router to start off with…
It's funny as I mentioned erbauer power tools last week's and I've also been looking at that same toolbox system. One issue btw is the clear top dividers only available with certain places and certain sets. So it will be interesting to see where this range is a year from now. Yeah tools are great I used them for three years of DIY'ing gutting my house. I've got basically every one of their 18v tools now.
Hmm I looked and didn't find a matched alt brand to mix and match with. Guess I need to get back on Google. In fact you got links to the other compatible cases from other brands? Found them. How the fuck did I miss those others are the same. 😵💫
ive got a set of the Erbauer drills. they are good. but i needed a new battery and they changed the battery and discontinued the battery i needed. ive got 2 nice Erbauer paper weighs now lol
A pipe fitter dropped a 8 inch flange from a scaffold into my erbaur top box and smashed the tote tray, think I'll get shadow foam and turn it into a power tool case
Nice job mate I’ve got a couple of makita systainers that I need to do this with but I use them for bottles of spirit stain and coloured waxes for my wood working so I’ll have to measure them and work out how to store the spray bottles and tins 👍🏻
Cheep tools good quality and very good warranty as through screwfix 6 month swap for new then 1 week repair upto 3 years used and its simple also good power from the tools without been 2 powerfull to efect its lifespan like milwaukee I have sds, combi drill 120nm, impact driver, mid tourqe impact wrench, high tourqe impact wrench, grinder, reciprocating saw Only issue I've had was impact driver collet circlip broke and lost ball bearing took in and replaced no issues I also have a bunch of corded tools from them without any issues I've stripped 115mm grinder and 230mm they are incredibly well constructed epoxy coated and resin bonded armature on both
This was a great task,..completed! Love Erbauer tools, good quality and bargain prices, …. Just catching up on missed videos,… I’d like to see a full park side wall, can’t find it anywhere… they are great tools that many are using… Pop over and all of mine if you like 😃
Hi mate just wondering with the kit you have just done in video for me to do the exact box erbauer and shadow foam for the exact erbauer tools you done in video. What set on shadow foam website would I need to choose to do the same. In mm thickness etc cheers
Had to return their big double bevel sliding mitre saw - very dangerously faulty (like an Evolution). Kept a corded jigsaw bought at the same time - it's OK, and dust extraction is really good. I'd like to have had the lucky end of the quality control spectrum of Erbauer and Evolution power tools, but, despite being retired, pensioner, DiYer, I save up for corded Makita and 18V Milwaukee. I use them a lot, and they're still cheaper than hiring professionals for stuff I can do. Their bits, blades, etc, are very well worth it.
Lol Erbauer is brand made for Castorama, they are made by Chevron compan, ther are they same design like new red Skil tools(from chevron too)...their "boxes" are produce by Keter - Keter Gear line is the same, and in US it's Ridgid boxes.....all made by Keter so...Erbauer is cheaper version of Skil;)
I've always used makita tools but after my van got broken into and all my tools stolen, I decided to buy erbaure and they've been awesome other than he blister boxes which I hate so these foams make a lot of sense. .
Nice job, I have worked full time with Erbauer 18v EXT tools for the last 3 years and have worked them hard! I'm that impressed I now have about 20 of them at home,only had one fault on the jigsaw and Screwfix swapped it for a new one same day in store, they are all rugged, reliable, powerful and do the job well ,I'm a bit of a snob when it comes to tools ,and although these are at a lower price point they look work and feel quality, out performing some far more expensive brands.
Couldn’t agree with you more mate
I have Erbauer and I’m going to change brands only because they don’t have a lot of cordless versions or a larger range. I need a cordless router to start off with…
I don't use their tools but I love the toolboxes, they're incredible for the price
And so spacious!
My wife is rapidly getting to the point of ordering me to do all this. Thanks for excellent video
Hahaha 🤣 you’re welcome mate! Let me know if you need any help mate
That's a great idea with the stacking of the foam to make deeper spaces. Will definitely need to consider doing something like this!
Great work
Jiggsy! Thanks for commenting mate, are you an erbauer user?
@@ShadowFoam I've had a few small bits of Erbauer before, but am a Bosch user myself, though am still building my collection.
Just got the impact and combi drill with two 18v 5ah batteries and the rotary sander and love them
Great selection there mate!
It's funny as I mentioned erbauer power tools last week's and I've also been looking at that same toolbox system.
One issue btw is the clear top dividers only available with certain places and certain sets.
So it will be interesting to see where this range is a year from now.
Yeah tools are great I used them for three years of DIY'ing gutting my house.
I've got basically every one of their 18v tools now.
Hmm I looked and didn't find a matched alt brand to mix and match with.
Guess I need to get back on Google.
In fact you got links to the other compatible cases from other brands?
Found them. How the fuck did I miss those others are the same. 😵💫
Cheers for clarifying that mate 👌
Nice done with the shadow Foam.
Ive got a full set of erbauer and im sticking with it good range and amazing quality
Don’t blame you there mate!
is red better for erbauer or the blue??
Personal preference I’d say, it’s up to you
ive got a set of the Erbauer drills. they are good. but i needed a new battery and they changed the battery and discontinued the battery i needed. ive got 2 nice Erbauer paper weighs now lol
Always useful to have a paperweight for jobs! 👍
Loads of them online, they are shared designs on the older pack style which you must be using.
So plenty to pick from.
@@TheWebstaff yes i have the older style ones. thank you for the info i will look it up :)
A pipe fitter dropped a 8 inch flange from a scaffold into my erbaur top box and smashed the tote tray, think I'll get shadow foam and turn it into a power tool case
i possible stick the 30mm sheet to the bottom of the top piece of shadow foam, loose piece of foam is bound to go missing
If it fits I see no reason why not
Nice job mate I’ve got a couple of makita systainers that I need to do this with but I use them for bottles of spirit stain and coloured waxes for my wood working so I’ll have to measure them and work out how to store the spray bottles and tins 👍🏻
Think that’ll come out pretty nice that! Let me know how you get on with that project! 👌
Been thinking about buying a box but did not like the idea of tools baning around in it, now i need shadow foam too it seems...
Cheep tools good quality and very good warranty as through screwfix 6 month swap for new then 1 week repair upto 3 years used and its simple also good power from the tools without been 2 powerfull to efect its lifespan like milwaukee
I have
sds, combi drill 120nm, impact driver, mid tourqe impact wrench, high tourqe impact wrench, grinder, reciprocating saw
Only issue I've had was impact driver collet circlip broke and lost ball bearing took in and replaced no issues
I also have a bunch of corded tools from them without any issues
I've stripped 115mm grinder and 230mm they are incredibly well constructed epoxy coated and resin bonded armature on both
Where did you get your tools from?
these tools are really decent if anyone is interested
no complaints from me, for DIYers they are fantastic!
This was a great task,..completed!
Love Erbauer tools, good quality and bargain prices, ….
Just catching up on missed videos,…
I’d like to see a full park side wall, can’t find it anywhere… they are great tools that many are using…
Pop over and all of mine if you like 😃
Hi mate just wondering with the kit you have just done in video for me to do the exact box erbauer and shadow foam for the exact erbauer tools you done in video. What set on shadow foam website would I need to choose to do the same. In mm thickness etc cheers
Never used any of their actual power tools, but Erbauer drills and blades are pretty decent. Nice job on the packout with the Shadow Foam. 👍👍
Thanks three phase, what would you like to see me do next?
Had to return their big double bevel sliding mitre saw - very dangerously faulty (like an Evolution). Kept a corded jigsaw bought at the same time - it's OK, and dust extraction is really good.
I'd like to have had the lucky end of the quality control spectrum of Erbauer and Evolution power tools, but, despite being retired, pensioner, DiYer, I save up for corded Makita and 18V Milwaukee. I use them a lot, and they're still cheaper than hiring professionals for stuff I can do.
Their bits, blades, etc, are very well worth it.
@@cuebj Thanks for the info 👍
Lol Erbauer is brand made for Castorama, they are made by Chevron compan, ther are they same design like new red Skil tools(from chevron too)...their "boxes" are produce by Keter - Keter Gear line is the same, and in US it's Ridgid boxes.....all made by Keter so...Erbauer is cheaper version of Skil;)
Milwaukee packout trolley box with circular saw and extras plz
Added to the list mate 👍
amazing
Erbauer user?
There was a tray with them boxes
I've always used makita tools but after my van got broken into and all my tools stolen, I decided to buy erbaure and they've been awesome other than he blister boxes which I hate so these foams make a lot of sense. .
The foam will make the boxes more versatile and useful!
Make a fest tool one?
On the list, don’t you worry! Subscribe to not miss out!
Like your videos mate, @craigphillips @Mrdiy
Craig Philips! Thanks very much mate, that’s high praise from a pro like yourself!🙌🙌