How to install H13 LED Headlight Bulbs - Tips and Tricks from Headlight Revolution
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- All Lighting Upgrades For Your Application: www.headlightrevolution.com/?...
All H13 Style LED Bulbs: www.headlightrevolution.com/l...
In this video, Chris shows how to install and aim some of the most common LED H13 bulbs on the market!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Fitment guaranteed! If it doesn’t work, we will solve the problem for you. We strive to give an excellent customer service experience. Our dedication to delivering on that promise is backed by a no-hassle return policy. We’ll provide a full refund on products returned within 30 days, no questions asked.
Note: This video is for educational purposes only and may show street-use content with products that may not be DOT compliant for use on public roads. The video is not intended to imply vehicle-specific street legality. LED and HID bulbs are street legal in the USA for fog light use and not in low beam or high beam headlights because they are not compliant with DOT / FMVSS108. When looking for on-road-use headlight upgrades we recommend DOT-compliant headlight housings, not bulb replacements. Certain specialty vehicles strictly limited to off-street use and not having DOT registration or license plates may use these products exclusively off-streets. International street legality varies by country. For detailed clarification on-street use, go to www.headlightrevolution.com/s...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Other videos that we recommend watching:
💡 Lighting Color Explained: • HID Color Temperature ...
💡 Are LED Bulbs Brighter than Halogen? • 100W Halogen VS LED Bu...
💡 Are LED Bulbs Brighter than HID? • HID vs LED - Which is ...
💡 LED Bulbs Brightness Shootout - which bulb is the brightest? • Best and Brightest? We...
💡 Which HID Kit Color is the brightest? • Which HID Color is the...
💡 The TRUTH about LED Bulbs! • The Truth about LED bu...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
For the best LED automotive lighting selection in the world, check us out here: headlightrevolution.com
If you have any questions about any of our products, email us at Sales@HeadlightRevolution or give us a call at (218) 755-5200!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Find us on social media!
TikTok: / headlight_revolution
Facebook: / headlightrevolution
Instagram: / headlightrevolution
Pinterest: / headlightrevolution
Twitter: / headlightrevolu
LinkedIn: / headlight-revolution
We Do Lighting Better Because We Test! - ยานยนต์และพาหนะ
Another helpfull video, thanks Chris. I will buy LED's from your company because of these videos that you make.
You are a lifesaver, my new LEDs were upside down and the vendor kept on suggesting I had my headlight hoywsing upside down, as it turns out they had to be rotated 180 degrees, No instructions included I was SO frustrated until I saw video explaining hiw to rotate the bulbs THANK YOU !!!!
No problem 👍
Finally. I just installed mine tonight and realized my low beam swing was producing the high beam on the lights and vice versa. Tomorrow I’ll have to redo them
Thank you very much for making this video. This helps me alot
I recently ordered the H13 2Stroke 3.0 for my 2007 Ford F250. I installed them as suggested in this video, perpendicular with the LEDs pointed horizontally. I struggled with how very low on-road output and even on the wall the beam was just scattered. So I compared how the OEM sylvania bulb mounted into my Ford OEM housing and noticed it can only be installed one way due to one of the mounting tabs being larger than the rest of the tabs. With that, the filaments are actually not perfectly perpendicular as you guys suggest. It is pointed at about 10 o'clock and 4 o'clock, so diagonally. This is the same for both passenger and drivers-side housings. I oriented the 2Strokes the same way and to my surprise the beam on the wall was no longer scattered and a defined hotspot appeared. The on-road light output was also much 100 times better than initial.
Sweet! 👐
Awesome videos. Thank you Sir.
Awesome videos! Very down to earth fast and no BS! I have h13 out of the 2006 ram 2500, love the GTR lighting ultra2 but I'm choking on the price,. Will a run of the mill HID perform similarly in brightness? Install complexity not withstanding of course. Furthermore, I am a ham radio operator, I anticipate the RF noise to be a bit worse with the HID vs LED. Thoughts?
Thanks!
Put the morimoto h13 on a Lincoln mark lt. Saw it wasnt straight but then noticed those tabs. They are extremely bright.
Good Stuff & Great Tips 👍 Thanks!
Thanks for watching!
Love your products is this the same h13 lights they use in snowmobiles?
does the gmc yukon 2009 take h13s as well? i want to intsall em but cant any info anywhere
Does a 2009 Hummer H3 take H13 bulbs also?
Great info, thanks.
Glad it was helpful!
I notice one led light has the light chips in different positions 3 chips on top and 3 chips on the bottom in a zig zag pattern. Does it matter which row of chips are on the top?
I'm looking to replace the headlights on my 2010 F150 Lariat. The current bulb is a h13, however it seems any replacements that I find around only fit a h7.
If I do get a replacement set I'm assuming that I will have to eat the cost of my H13 LEDs, for the H7s? Is this correct or can the H13s be utilized as well?
Having a lot of trouble trying to fit these led lights into my 2013 camaro ss. And I know 2013 camaro takes H13 headlights I don’t know what the issue is. But turning it and trying to lock it in place is not getting in. And I’m not able to get connected and get it to lock any help?
Hope u still look up here but I have a 2011 mustang v6 base and I have already bought 3 different sets of lights the problem is the new light plug is small with 3 prongs and the car looks wide , flat with 16 pins I want to know how I can convert my halogen to LEDs on a budget
I have the H13 LED bulb from XKGLOW installed on my 2013 dodge challenger R/T. I have the main headlights, the switchback bulbs and fog lights. Zero problems with the switchback bulbs and fog light bulbs. The main headlight bulbs are very problematic. When you reach 95 mph, they start to flicker, the faster you go, the more they flicker, 115 mph, they flicker like crazy. Today i was racing around enjoying some spirited driving and the drivers side headlight low beam went out. I love the look but they are inconsistent at best. I have also tried Lightening dark, they are really good, they do not go out, but they also start to flicker at high speed. Its not an electrical problem, I put the stock halogen bulbs in and no problems with flickering at any speed and they do not go out.
That is super odd, that sounds like you may need a pair of PWM Modules linked here: headlightrevolution.com/gtr-lighting-pwm-interface-module-h13-style-connectors/
@@HeadlightRevolution thank you.
@@HeadlightRevolution I purchased the interface module, lets see what happens. Thank you for sharing the link, I will get back to you with the results.
Right on David, let us know what you come up with!👍
@@HeadlightRevolution I installed the modules and noticed that i had a loose wire from the cars wiring harness going into the female plug, bottom line, the lights do not flicker at any speed, nor do they go out, problem solved. thank you.
I bought the gtr ultras 2 and the PWB modules do the install on the lower bulbs in my f250 super duty
Just the lower bulbs!
I have a 2013 f250 that takes h13 bulbs I'm thinking about get the gtr mini but my truck has day time running lights and I don't know if they will work or not
They will run at full intensity even for the DRL.
I installed a set of H13 led bulbs on a Lincoln LT and 9145 led fog light bulbs. My problem is when light switch is on parking light position I can turn the fog lights on. When I switch them to on (Low beam position) the fog lights go out. If I turn the fog light on it automatically turns the high beams on. Any input on this issue would be appreciated. Btw I have checked polarity and that is all good. I'm thinking it may need a decoder harness but IDK.
That is very strange, Send us an email at sales@headlightrevolution.com and we will figure something out!
Hi Chris. I'm so new to this. Just a curious question, what will an H4 bulb pattern look if installed in an H13 housing?
No, it won't fit to begin with. You'll need an H13 bulb.
Whats the brightest h13 bulb you would reccomed currently run hikari and they arent too bright
The S-V.4 or the GTR Lighting Ultra 2 have been some of the best performing H13 bulbs we’ve seen so far.
If I was to replace the h13 bulbs in my Dodge Ram will I get an indicator staying light out?
Here is a kit that will work with zero issues! headlightrevolution.com/2006-2012-dodge-ram-reflector-dual-beam-led-h13-headlight-bulbs-upgrade-v-4/
you guys need to test the slyvania leds from the parts store... and do a video on it
They're bad, very bad. Maybe we can do a video on it at some point though!
Have a 2020 nissan nv1500 it has daytime running lights bought a set of h13 but they flicker when daytime running lights on . On the left side would i need resistors or a harness ??
Get a PwM module
Hi
What LEDs setup you recommend for a 2011 jeep liberty (Canadian version that runs daylights) that doesn’t flicker?
Thanks
Converting to any LED or HID kit will not be DOT compliant. To remain DOT compliant, we would recommend going with a higher-powered halogen bulb, like the ones from Vision X. Here’s the one that we recommend: headlightrevolution.com/vision-x-h13-80-100-watt-headlight-bulb-set/
Headlight Revolution thanks!!!
You're very welcome!
2011 GMC Yukon. What led would you recommend for headlight and fog light
Send us an email at sales@headlightrevolution.com and we will go over a few options with you!
@@HeadlightRevolution ok email sent thank you
i have been told the ford f-350 has issues with using the H13/9008: GTR LIGHTING ULTRA 2.0 as the computer is saying lights out??have anybody heard anything like this?? thanks
If you ever had anything like that, all you would need to do would be to install a pair of the PWM modules linked below! This will be the same for any LED bulb when plugged into that factory halogen Superduty headlight! Let us know if you have any other questions, we are here to help! Link: www.headlightrevolution.com/gtr-lighting-pwm-hid-kit-modules-ACC.PWM5202.MOD_2?quantity=1
Does it matter which leds are on top or bottom for high and low on the morimoto 2 stroke
Yes it does. You'll want the the LED chips that are closer to the tip of the bulb on top!
@@HeadlightRevolution I looked all over your install and alignment videos for this info. you should incorporate it into your alignment video for the H13 , thanks for your reply
I was thinking the same cause I got low on top and my high on the bottom
So If the hi and low led chips are offset from one another, which is top and bottom?
The chip set closer to the back of the bulb is going to be for high beam, and it should be pointed down.
Hey man am having trouble installing my led because they are facing up and down
Did you buy a set that are adjustable? If so, You can usually remove a screw and adjust them to get them perfect.
The pwb,s install on lower bulbs only. Correct?
Correct!
I have a 2013 chevy cruze that takes the h13 bulb and when I put my led in and turn it to tighten it it doesn't line up right. The LEDs are supposed to be at 9 and 3 but I can only get them to 2 and 8. Is there anyway to fix this? I have 2 auxito 9008/h13 high and low beam LEDs
I am not sure on that product, as that is not a product that we actually sell. You will have to clock that bulb so that the LEDs are facing 9 and 3, I hope you are able to get that figured out! Sorry I couldnt be of more help today, have a good one my man!
@@HeadlightRevolution I appreciate you taking the time to answer me back. I love your videos!! Have a good Thanksgiving.
Glad we could help you out, thank you for the support! Happy Thanksgiving to you as well!
Does it fit with the 2012 Chevrolet Cruze Lt ???
It sure would!
Does it fits at Hummer h2?
That bulb should totally fit a Hummer! That will give you a fantastic upgrade in light output!
Help 🆘 06 Durango 9008 H- 13 LEDs stay on when switch Is off /key off 📴although not at full brightness ,but more than ghosting ?thank you for your time.
Reach out to our CS team!
218-755-5200
Sales@HeadlightRevolution.com
Do they overheat? What if the fan goes out
They do not, if the fan goes out it will still run at partial power. This would be a warranty replacement situation though!
I keep buying led headlight h13 bulbs but there always flickering on my ram what can I do to fix that problem.
What year is your Ram?
2008
For that year, you will need a PWM module to prevent the flickering. I suggest going with the S-V.4 bulbs with the GTR Lighting PWM modules. That's the best bulb/PWM combo that we have found so far.
headlightrevolution.com/2006-2012-dodge-ram-reflector-dual-beam-led-h13-headlight-bulbs-upgrade-v-4/
After leds installed, now when i turn on my fog lights high lights get on instantly. Help
Thank you for commenting, so sorry to hear about this issue! You will need to get a pair of T-resistor harnesses in the H13 size, and I have linked those for you here: www.headlightrevolution.com/9006-50w-resistor-harness-ACC.HAR.RES.9005_2?quantity=1
@@HeadlightRevolution thank you for answering. How does that work?
Is it normal to lose flasher functionality when LED's are installed???
Your turn signals no longer function?
I'm installing h13 led lights in a 2018 kia soul .my problem is the both leds are lighting on low beam and only 1 is lighting on high beam. The plug only installs one way . I can't reverse polarity
Rotate the bulb
@@American_Devil i did that, same issue. I sent them back and purchased new lights from a different manufacturer, all good now. Thanks
@@timothyryan2847 which manufacture did you go with? I actually just installed the axial tonight and went for a test drive without knowing about the rotating thing until afterwards. I’ll be rotating them tomorrow to see if that fixed the issue
@@American_Devil i think they are from Auxito. Its been a while.
hello, i installed this h13 on nissan nv200 2015, only high beam work but not the low beam, anyone can help pelase
Try installing PWM modules in line with them!
@@HeadlightRevolution can you suggest me one? I have Nissan nv200 2015. Thanks
GTR Lighting PWM modules!
How about coming up with a LED Bulb that fits the 2017 JEEP JK Factory LED Bulb? Mopar Part Numbers are: 68366024AA & 68366025AA These Bulbs are about $500 each. Im thinking this is Highway Robbery!
These aren't bulbs. They're full headlight housings. You cannot replace the parts inside them you have to replace the entire unit.
how do you get the headlight out of the car?
Depends on the vehicle! Shoot us an email, we might be able to help - sales@headlightrevolution.com
I have a question does the bright chip need to be up or down
3 and 9 position.
If you came here looking fir the answer i was, not to knock the video its fantastic, HAT GOES ON TOP, THE HAT KNOB TO LOCK THE BULB IN PLACE GOES ON TOP.
your welcome.🎉
Best h13 led is ? Please link 🔗
I have Escape 2010 all i buy is shit
Ultra 2! www.headlightrevolution.com/H13-9008-Ultra-2.0_2?quantity=1