Limited sponsorship for Newest LED Bulbs Testing Provided. Don't hesitate to contact us to grab this opportunity. 1. Contact email: youtube@lasfit.com 2. Please tell us your vehicle make, model and year
Thank you. Hands down the most direct to the point explanative easily understandable video when it comes to proper LED installation in regards to rotation depth insertion and why certain beam patterns look the way they do Thank you awesome man!
Got my lights today and installed on my titan xd, definitely had to do some aiming afterwards but they work wonderful and shipping was fast thank you so much
So, the LED's in the headlight should be facing to the sides (left and right) and not up and down inside the housing, right? My beams on a 2008 hyundai sonata look like crap during the night and I thought my LED's came defective or something like that.
I have a questions i just bought this led bulbs from lasfit ok i know the that the lighting Chip should be 3 o'clock and 9 but what about the little cut out on the bulb. How do i set it? Towards the top or towards bottom
Hello, could you tell us your vehicle make, model and year? What LED bulbs have you bought from Lasfit? May I know why you want to cut on the bulb and how you cut the bulb?
Hello, I'm from India(Right hand drive) I installed an HID kit in my tata nexon EV. The left beam is a bit angled (currently in 2.30 and 8.30 instead of 3 and 9), what should I do to fix this issue?
@@lasfitvehiclelife That's not what I meant, my low beam projectors had H7 Halogens in them(55W 3000K each). They had perfect cut off, but poor brightness. I retrofitted (swapped those) with Osram HID kit H7 (6000K 35W each). The cut off is similar to my stock setup for right beam. But for left beam its angled at 10degrees compared to the perfect right beam. Also left beam creates an unwanted hotspot in top left corner and some dark spots in front. Could you please share your email id or social media handles, I could send you the pictures for reference
LAplus H11 LED bulbs don't have a set screw, so you can rotate it freely. You can turn the LED bulb until the beam pattern is ok. What's your vehicle make, model and year? Is it projector headlight or regular reflector headlight？
You mentioned that the cut off for the passenger side headlight is higher. What do I do if my driver’s side headlight’s cut off is higher than my passenger side? I live in the US
Fix ur led bulb orientation, and have the led chips facing 3-9 o’clock. And adjust ur beam pattern height, u gotta have a flat surface area and aim ur lights to the wall and use another vehicle ad a guide to see how high is ur beam pattern, if it’s close to the edge of the car window. That’s what u need.
😆😆😆The new prototype of high beams is available. We already tested several different prototypes on Passat, work perfectly. Please send an email to cs@lasfit.com Once new products are available, I will inform you.
Does it matter if my 2019 Chevy trax has projector headlamps?? I bought some Fahren leds from Amazon but I was on the freeway and there’s like black spots when I looked at the road there’s a black spot?? Anyone know why? Or should I order some leds from lasfit??
I have installed your h8 plus in my reflector headligjts and when I alighn the chip in the 12 and 6 its not as bright. It's to bright in the 9 and 3 position. Is it OK to leave in the 12 and 6 position
No. Ur not supposed to position the led chips putting 6-12 o’clock. That blinds propel for that. And of course it’s super bright, that is the point we’re u need the hotspot short directly down on the road with a wide beam pattern spreads. Always adjust to 3-9 o’clock. That’s ur best thing to do.😊
Except one. Diode Dynamics are made in the US. But so what if it’s Chinese made, if the quality is there and it’d well made. I wouldn’t even complain for that.
Just installed LA Plus Series H11 LED Bulbs 60W 6000LM 6000K Plus H11 Extension Cable To Replace H11B Bulbs × 1 into Veloster turbo. Output pattern seems appropriate but even though they are whiter, they seem no brighter than the halogens. Not sure what to do.
@@nicholasfitchett7278the new lasfit LA plus is definitely brighter than stock man. No doubts about its Have it on H11 on my family’s 2017 Toyota sienna LE. It’s definitely 3x’s brighter than stock. If it’s not as bright as before, rotate ur led bulb’s orientation.
Limited sponsorship for Newest LED Bulbs Testing Provided.
Don't hesitate to contact us to grab this opportunity.
1. Contact email: youtube@lasfit.com
2. Please tell us your vehicle make, model and year
Finally someone that knows how to properly adjust LED bulbs in projector housing from observing the pattern from the front of the lens.
Got my shipped today and they are very bright but still aligned then and little bit more. They work so much better compare the brand I had before
Thank you for your feedback. May I know your vehicle make, model and year, and what LED bulbs you have installed?
@@lasfitvehiclelife 2017 Kia Optima
LA Plus Series 9005 HB3 LED bulbs 60W 6000LM 6000K Amplified Flux Beam
Thank you. Hands down the most direct to the point explanative easily understandable video when it comes to proper LED installation in regards to rotation depth insertion and why certain beam patterns look the way they do Thank you awesome man!
Got my lights today and installed on my titan xd, definitely had to do some aiming afterwards but they work wonderful and shipping was fast thank you so much
Wow~ Glad it helped.
Thank you for your feedback.
The kind of person who thinks that blinding every other driver on the road makes them safer doesn't deserve a lisence.
Very nice video. Thanks for taking the time and explaining what to look for when clocking LEDs.
So, the LED's in the headlight should be facing to the sides (left and right) and not up and down inside the housing, right? My beams on a 2008 hyundai sonata look like crap during the night and I thought my LED's came defective or something like that.
Yes, the correct direction is the LED chips facing side by side with the wire cord down at 6 o'clock.
Big help thank you!!!!!!!!!!!!!
Glad it help! We also look forward to receiving more feedback from you after installing Lasfit products!
Great video! I have projector bulbs, thanks so much!
Glad it's helpful for you.
May I know your car make, model and year?
@@lasfitvehiclelife 2017 kia forte lx 😊
@@boyera23 Cool!
I have a questions i just bought this led bulbs from lasfit ok i know the that the lighting Chip should be 3 o'clock and 9 but what about the little cut out on the bulb. How do i set it? Towards the top or towards bottom
Hello, could you tell us your vehicle make, model and year? What LED bulbs have you bought from Lasfit? May I know why you want to cut on the bulb and how you cut the bulb?
Honestl, Best video regarding the orientation
Glad it helped. 😊
Thanks for the tips
Glad it helped 😊
Damn should have watch this before installing now I have to redo it again😅
LOL😂🤣😆
Good instructions. Thank you.
Glad it helped. May I know your vehicle make, model and year?
Thank you for this information!
Hello, I'm from India(Right hand drive) I installed an HID kit in my tata nexon EV. The left beam is a bit angled (currently in 2.30 and 8.30 instead of 3 and 9), what should I do to fix this issue?
If the HID bulb socket is fixed, can't be adjusted, you can't adjust the beam pattern.
@@lasfitvehiclelife That's not what I meant, my low beam projectors had H7 Halogens in them(55W 3000K each). They had perfect cut off, but poor brightness. I retrofitted (swapped those) with Osram HID kit H7 (6000K 35W each). The cut off is similar to my stock setup for right beam. But for left beam its angled at 10degrees compared to the perfect right beam. Also left beam creates an unwanted hotspot in top left corner and some dark spots in front. Could you please share your email id or social media handles, I could send you the pictures for reference
Which are the instructions to rotate the orientation of the bulb to obtain the 9 and 3 position on LaPlus H11? Does it have a set screw? Thanks!
LAplus H11 LED bulbs don't have a set screw, so you can rotate it freely.
You can turn the LED bulb until the beam pattern is ok.
What's your vehicle make, model and year? Is it projector headlight or regular reflector headlight？
@@lasfitvehiclelife 2014 Jeep Grand Cherokee with halogen projectors. Thanks.
You mentioned that the cut off for the passenger side headlight is higher. What do I do if my driver’s side headlight’s cut off is higher than my passenger side? I live in the US
Hello, you could try to aim your headlights, plz refer to this video:
th-cam.com/video/-URl1GIoEnM/w-d-xo.html
Recently changed headlight on my honda civic 2011 (h7 led) and these are very bright and many flashes from oncoming traffic, how do I fix it please
Please try to adjust the LED bulbs, you can refer to this video:
th-cam.com/video/hdWaXX7IZ80/w-d-xo.html
Did it work?
Fix ur led bulb orientation, and have the led chips facing 3-9 o’clock. And adjust ur beam pattern height, u gotta have a flat surface area and aim ur lights to the wall and use another vehicle ad a guide to see how high is ur beam pattern, if it’s close to the edge of the car window. That’s what u need.
How do I adjust HB3s for an 05 Yukon? They're a circular look and the beam is inconsistent.
U don’t. For low beams they are adjustable. For 9005/HB3 high beams. U don’t need to adjust them, as they act like a combo beam.
How close are you guys to high beams for a 2015 passat! I need it desperately! 😁
😆😆😆The new prototype of high beams is available. We already tested several different prototypes on Passat, work perfectly. Please send an email to cs@lasfit.com
Once new products are available, I will inform you.
Pl just tell me rotating clock wise and anti clock wise what would the effect on beam like inward or outward.
Does it matter if my 2019 Chevy trax has projector headlamps?? I bought some Fahren leds from Amazon but I was on the freeway and there’s like black spots when I looked at the road there’s a black spot?? Anyone know why? Or should I order some leds from lasfit??
Projector or reflector. Ur led bulbs with 2 sided led chips will work fine for 3-9 o’clock.
U also picked a very good one. Either Forscher, Krigeis, or Termitor. Those are great options.
Did you mean 3 and 9 the second time? Cuz you said 3 and 6.
Hi, two sides with LED chips of the LED bulb at 3 and 9 o'clock.
Thank you for your feedback.
@@lasfitvehiclelife thank you!
Wait I have all my LEDS at 12 and 6 is that incorrect? Civic Si coupr
If your LED bulbs are two sides with LED bulbs, the correction direction is at 3-9 o'clock.
Do you get flashed a lot?
@@theenglishtrucker1849 Hi, you can watch this video, how to adjust the beam pattern:
th-cam.com/video/hdWaXX7IZ80/w-d-xo.html
Is the wire should be on the bottom or it doesn’t matter as long as it’s positioned at 3-9 o’clock?
@@theenglishtrucker1849if it’s scattered the beam pattern, yes u will get flashed for that.
I have installed your h8 plus in my reflector headligjts and when I alighn the chip in the 12 and 6 its not as bright. It's to bright in the 9 and 3 position. Is it OK to leave in the 12 and 6 position
Hi, the correct direction is the chip at 3 and 9 position, face to face, not up-down.
No. Ur not supposed to position the led chips putting 6-12 o’clock. That blinds propel for that.
And of course it’s super bright, that is the point we’re u need the hotspot short directly down on the road with a wide beam pattern spreads.
Always adjust to 3-9 o’clock.
That’s ur best thing to do.😊
Every LED you find on Amazon are Chinese made so it is what it is.
Even the Philips ones, they are made in China...
@@wtrdogg20 - Yup. The good ol’ profiting. Cheap labor and manufacturing with high retail cost.
Except one. Diode Dynamics are made in the US.
But so what if it’s Chinese made, if the quality is there and it’d well made. I wouldn’t even complain for that.
@@truthkeeperfilmsnot on lasfit. These aren’t cheap.
What would the luminosity of a LED if it’s on 12 and 6 position instead of the 9 and 3 position?
The output beam pattern will be bad.
Just installed LA Plus Series H11 LED Bulbs 60W 6000LM 6000K Plus H11 Extension Cable To Replace H11B Bulbs × 1 into Veloster turbo. Output pattern seems appropriate but even though they are whiter, they seem no brighter than the halogens. Not sure what to do.
@@nicholasfitchett7278the new lasfit LA plus is definitely brighter than stock man. No doubts about its
Have it on H11 on my family’s 2017 Toyota sienna LE.
It’s definitely 3x’s brighter than stock.
If it’s not as bright as before, rotate ur led bulb’s orientation.