Jeep JK Body Mounted Tire Carrier Features & Benefits - Poison Spyder

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ก.ย. 2024
  • Dusty explains the features and benefits of the new JK Body Mounted Tire Carrier. Many cool features here and we are very excited to release this tire carrier!

ความคิดเห็น • 38

  • @landuneauto
    @landuneauto 3 ปีที่แล้ว +1

    My state legally requires 3rd brake light and a license plate light, do you guys make kits that go with this carrier to relocate these things?

  • @MrChucklesGaming
    @MrChucklesGaming 9 ปีที่แล้ว

    Damn, that thing looks great, but the Genright accommodates a 42" tire. Considering the fact that I'm torn between 42" and 44", this puts PSC completely out of the running. Good luck guys, it's a nice looking tire carrier.

    • @PoisonSpyderTV
      @PoisonSpyderTV  9 ปีที่แล้ว +1

      No hard feelings MrChucklesGaming. Best of luck with whatever you go with. --Dusty

  • @Chicago_Bikepacker
    @Chicago_Bikepacker ปีที่แล้ว

    DONT BUY THIS PRODUCT
    I regret buying this POS and here’s why.
    First off… The tubing bends are way out of spec. After installation of the hinged side the locking side was about two inches too far inward. I had to get my hi-lift jack and cutting torch out and heat up the bends then use the jack to spread the carrier ends apart so that the locking plate can be mounted.
    Next, the directions SUCK!!! You may as well just burn them.
    It says that mounting plate should be even with the edge of the top bend of the body. Well… I did that and I had to elongate all four holes in the tub so that mounting plate fits perfectly with the hardware and brackets that goes on the inside.
    Next, once i got everything installed as high as it would go, I put the tire on the carrier and it wouldn’t line up correctly. I still need to lift up on it to be able to close it…
    I can’t express enough how much I hate this thing…
    Oh, and it also rattles like crazy

  • @erikbrown2682
    @erikbrown2682 3 ปีที่แล้ว +1

    Man I love the Fab Four slant back but that puppy is 3k out the door and then u need a slant top. This maybe the best looking option I see for a 40 inch tire

  • @rubenrobles1162
    @rubenrobles1162 ปีที่แล้ว

    WHEN! .....when will this be available for the JLU?

  • @JeepArmyUSA
    @JeepArmyUSA 9 ปีที่แล้ว

    Sweet. I wonder how it compares to the Teraflex hd hinged tire carrier.

  • @bastosreviewer5192
    @bastosreviewer5192 3 ปีที่แล้ว

    @PoisonSpyderTV can this work with the JK Smittybilt GEN1 XRC armor corner guard fender kit?

  • @Georgia4Low
    @Georgia4Low 4 ปีที่แล้ว

    dang, wish I could rebuild my Jeep with Poison Spyder carrier, bumpers, etc.

  • @guest2007
    @guest2007 5 ปีที่แล้ว

    30 apr 2019 5:4 pm edt:3:01 thanks.
    i wonder how spare-tire-carrier stick to cargo-door/tailgate in wrangler.does spare-tire-carrier stick to cargo-door-panel,or stick to a bar inside cargo-door-panel.our car is honda crv year 2003,i can not find info about how crv-spare-tire-carrier stick to crv-cargo-door :)

  • @CptBongue
    @CptBongue 4 ปีที่แล้ว

    Does it come in black?

  • @knightmare50
    @knightmare50 7 ปีที่แล้ว

    pick one for my girlfriend today. that's no April Fools joke either. Cause she'll get mad at me and of course Boot to the Head.

  • @liangxie7326
    @liangxie7326 9 ปีที่แล้ว

    LOVE IT, and it has most of the features I want. Can I mode it to accept regular Jerry Cans?

  • @InjunOutdoors
    @InjunOutdoors 6 ปีที่แล้ว

    Would the weight of 2 jerry cans in place of roto pak be too much weight on the carrier?

  • @dillonwagers1841
    @dillonwagers1841 9 ปีที่แล้ว

    This would look so awesome on a TJ, I hope you guys decide to make them!

  • @BrianLee5
    @BrianLee5 8 ปีที่แล้ว +2

    Hi, this is the video I watched before I purchase it and it's been 2 months I've had this tire carrier.
    I'm 100% satisfied with this product so far.
    Now I'm trying to get rotopax just like you have in your video, and I'm wondering what size of rotopax would fit.
    I'm assuming you have 2 Gal. size in your video, and just wanted to make sure before I buy.
    Do you think 3 Gal. size rotopax would cover the number plate?

    • @aidannina494
      @aidannina494 7 ปีที่แล้ว

      Brian Lee 3 gallon would its wider and your putting even more stress on it 8 guys in out club have this tire carrier and 5 out of 8 of them have the 2 gallons gas can on them

  • @ravencraft3074
    @ravencraft3074 9 ปีที่แล้ว

    you guys need to add this option to the virtual garage builder

  • @trac3rjku929
    @trac3rjku929 8 ปีที่แล้ว

    Would this tire carrier work with gobi stealth rack?

  • @mearly58
    @mearly58 8 ปีที่แล้ว

    what color of paint for the carrier. and is it powder coated?

  • @jromo93
    @jromo93 9 ปีที่แล้ว

    Will this work with a drop down tail gate

  • @jaynoneofyourbiz3563
    @jaynoneofyourbiz3563 8 ปีที่แล้ว

    will this work with the xrc armor rear fenders i have in place? if so what mods need to be done to make this carrier work?

    • @PoisonSpyderTV
      @PoisonSpyderTV  8 ปีที่แล้ว

      Jay, we've heard of a few people using this carrier with the XRC rear armor but we haven't seen it in person ourselves. I can't give you details as to what extra work/fabrication is required to use the two products together. My best advice is to take a good look at the installation instructions, which can be downloaded from our website, and try to determine from those what might be needed to make it work with your existing equipment. Best of luck with your research. --Dusty

  • @badranger2004
    @badranger2004 8 ปีที่แล้ว

    Dose this carrier have a provision for the third high mounted brake light

    • @PoisonSpyderTV
      @PoisonSpyderTV  8 ปีที่แล้ว

      badranger2004 we sell an LED license plate with third brake light, separately. It is universal and can be used with this tire carrier. You can check it out on our website. --Dusty

  • @user-cj7dv2kc6d
    @user-cj7dv2kc6d 6 ปีที่แล้ว

    no love for the pre jk's :(

  • @thomaslahr9022
    @thomaslahr9022 6 ปีที่แล้ว

    beautiful welds!

  • @thomyi
    @thomyi 9 ปีที่แล้ว

    What rear bumper is that?

    • @PoisonSpyderTV
      @PoisonSpyderTV  9 ปีที่แล้ว

      +Thomas Yi its our RockBrawler Rear Bumper. You can find out more about it on our website.

  • @venomrubiconjku2816
    @venomrubiconjku2816 6 ปีที่แล้ว

    I have an Evo hilift jack mount that mounts to the factory hinge will this tire carrier clear it ? I like the idea of ur tire carrier locking and having the jack behind it for a more anti theft deterrent

  • @TimR.VetGolf
    @TimR.VetGolf 9 ปีที่แล้ว

    Perfectly done, guys. One questions, Dusty, reference to the license plate. I went to your site and looked at the video again...rear license plates are required to be lite at night. Did you leave that up to the buyer to worry about or am I need seeing where that is part of the kit?

    • @PoisonSpyderTV
      @PoisonSpyderTV  9 ปีที่แล้ว

      Tim, we sell an LED license plate & third brake light that you can install with this tire carrier. Check our site, its under lighting.

    • @TimR.VetGolf
      @TimR.VetGolf 9 ปีที่แล้ว

      I found it...thanks.

  • @Julius_Seizure69
    @Julius_Seizure69 9 ปีที่แล้ว

    Sweet Bumper! definitely going on the jeep soon.... just curious about the overhang of the tire. When youre coming off of a ledge and the tire hits i feel like it might get hung up and mess up the tire. skidplate maybe?

    • @PoisonSpyderTV
      @PoisonSpyderTV  9 ปีที่แล้ว +2

      Harley the scenario you describe is definitely an issue to be concerned about. We've tried to alleviate that concern a little bit with the strengthening we've designed into the mounting of it. But even with that, we still don't recommend coming down hard on it off of a ledge. This really isn't the right tire carrier for someone who's into hard core rock crawling and/or doesn't drive with a measure of finesse. For those folks we recommend either leaving the spare in camp or going with one of our bumper/frame mounted tire carriers from our RockBrawler bumper line. Thanks!

  • @firstdaddy
    @firstdaddy 9 ปีที่แล้ว

    What about the license plate light and the third brake light? These are two important things. Look forward to your answer.

    • @PoisonSpyderTV
      @PoisonSpyderTV  9 ปีที่แล้ว

      firstdaddy we sell an LED license plate & third brake light that you can install with this tire carrier. Check our site, its under lighting.

    • @firstdaddy
      @firstdaddy 9 ปีที่แล้ว

      PoisonSpyderTV Thanks!