Mounting a winch on a gooseneck trailer!
ฝัง
- เผยแพร่เมื่อ 1 ก.ค. 2024
- In this video I pull the @warnindustries winch off of my gooseneck trailer and weld on a receiver tube so that I can use my @harborfreight Badlands winch instead. With the winch mounted up high I can keep my synthetic rope from dragging on the ramps as it pulls the vehicle up, then use my @MattsOffRoadRecovery soft shackle to redirect the line down lower to clear the bumper as the vehicle comes forward on the deck.
.Yankum Ropes products!
yankum.com?afmc=CHR
Auxbeam switch pods and lighting products.
www.auxbeam.com
Auxbeam 6 switch pod
amzn.to/3uCeQR4
Ancel PB100 Power Probe
amzn.to/3Gk8ewp
Superclean.com - ยานยนต์และพาหนะ
![ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #1 SS8 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/Ytc50m91QK8/mqdefault.jpg)
Loving the bag cover bud take care brother
I love your creativity casey and when you show us tips on recoveries , your business is growing and all you need is a bigger shop now 😉
Nice setup with the winch, like I commented in the video about E-trailer I would have kept it also to compensate for your losses.
Agreed on the tires. If they want that back, came and pick it up. Its their incompetent delivering orders and not yours.
Casey,
Mount a 12" roller on the tail of the trailer to keep the cable from getting chewed up.
For the goose neck side, a ring and snatch block or roller fairlead will change the cable direction and again keep the synthetic cable from getting chewed up.
I work for a welding supply company, most of that equipment looks familiar. Good job on that.
The trail is looking very good. Casey love the bag cover. Love all your video’s. Can’t wait for the next adventure. Thanks for sharing.☺️☺️☺️👍👍👍😜🤪😳
I greatly appreciate you showing your bag and talking about it from time to time. It looks like I'm going to be having one soon and it's nice to see that it doesnt really get in the way of your day to day, hard working lifestyle.
Nope, once you get through the recovery process and figure out what bags do and don't work for you, it's right back to normal life
@@CaseyLaDelle Same as a prosthetic leg.
Had me a stuffed-up surgery done on my left foot in July 2022, and although both major wounds each side of the ankle healed, they couldn't get rid of the poison/inflammation inside the foot, so after seven months of having the wounds dressed every 2nd day & ALMOST walking until the infection started overtaking the antibiotics, they again started talking about doing it all again, to re-scrape the crystallite out of my ankle - but as the surgeon said to me that the wounds about the ankle having healed, my ankle was OK, it was just other bones in my left foot, that had become overcome with the infection, to the point where bones had started to soften, and decay / wither away.
Hence I swiftly told them, if there's really no point in doing it all again, with another six months of dressings and SEVERE pain, just to get a foot that wasn't viable - don't piss around.
Cut the thing off.
Sure I didn't want to lose the foot, but the way the infection was moving up my leg, neither did I want to lose my knee.
So - by getting a BNA (Below Knee Amputation) it circumvented all the pain & suffering I would have had for another six months or more, just to lose the knee at some stage anyway.
Now, it has healed (and a prosthetic fitted) - all I have to do is relearn how to walk - after (that is), getting it shrunk enough to remove the pain of having the prosthetic squeezed onto my stump, when it's ON there.
I did well today, when the local wood merchant delivered 3cu of firewood & by helping the missus shift it into the woodshed, & having worn it down in the woodshed for a good two & a half hours (until it was so numb & painful it was about time to remove it), I feel proud to say - I'm slowly getting used to it, and being upright again.
Albeit coming down off my "high" into the wheelchair again hasn't in any way stalled my desire to (someday) walk again, without relying on elbow crutches etc.
Oh sure, so you have a "baggie", at least there's no need to rush off and find a loo (as you carry your one with you) - and can plan your daily activities around a timeline of emptying your (on hip) loo bags.
I love your opinions especially your passion for the wenches I love the way you tell the other competitors to go kick rocks keep up the good work brother now back to your videos I'm a faithful follower Joe Dirt NorCal Nevada City California
the goose neck trailer is awesome! Well done Casey! Can't wait to see todays adventure video!
Thank you for another great, well thought out video, Casey. Stay safe and have a great weekend.
Someone's not happy with the trailer guys! Not sure if you said fight me! Or bite me! lol. Thumbs up! 👍
I said "fight me". But bit me would work as well
@@CaseyLaDelle Lol
Excellent weld, I can tell by the sound.
Nice winch setup. Fun to watch your work. Glad you are telling them to get bent.
The welding looked good to me and a lot better than I could ever do! tou have a nice set up on that trailer now!
Excellent video. Love how handy you are
Love watching you do all the things I can’t do no suggestions from me. Look forward to your videos
I’m trying to figure out where I can install a winch on my trailer.
Guess what, now I know thanks your creative.
Thank you 🙏
Nice video, Casey. I see you're up to your old tricks again. Thinking!! LOL!! Nice job on the winch mounting. I can tell you've welded before! 😁
i like your way of thinking about the new spare you have
Love the videos. You have some awesome ideas. Thanks
One handed stick welding.....not easy. Nice work!
Your an awesome guy, great work brother!
Thanks again for a nother great video, glad I finally started watching your channel
Hey Casey
Another informative and entertaining video.
You get into some great projects !
And thank you for the personal history, it's cool to know where you got your experience.
Good call on the e trailer debacle.
Their ineptness in dealing with you has likely cost them far more than they will ever relize.
Work Safe, Be Well
Another great video,they can write off that tire and wheel aso ,I bet,,Like the soft shackle and ring idea,,no snatch block
Nice setup.
just like before,,,, a job well done !!!!!
Welds look good and deep. Hit em with some zinc galvanizing primer, they will outlast the trailer!
There's no rust here. We live in a very dry climate
I like the winches from TSC.
Interesting label on bag. Your right, it does.
Great job
He won’t b at 10,000 for long. Channel will explode. Good stuff. He can still answer most comments.
yeah see i need mine done the same way except im going to put a pulley at the end of the trailer so it wont drag either. looks all good for sure
Omg first! For once. Love your videos man. You remind me of my brother in-law
Very informative video. Thank you for sharing. Thoughts on painting the underside (before welding) with weldable paint? I’ve never used it but I’ve heard of it. Thanks
Thank You for the flood of videos. We enjoy the water...
you got it ! I could never hold camera and weld stick in left hand and do prolooking welding !!!
Love the video and please let us know how it turns out on the spare tire
Casey, really like the channel, a great variety of different content. I had a question about welding and what you would recommend how to start?
Hope you get this message Casey. I see you replaced some boards on your trailer. I recently replaced the wood on my 18 foot utility trailer. when i went to treat the wood, i had a gentlemen tell me to use a mixture of 1 Gallon of diesel with 1 gallon of USED motor oil. mix it well then apply. let the first coat set in, it dont take long, then apply second coat. I have since been told that this mixture works way better than any sealant you can buy.
Zero chance I’m putting gas an oil on my deck. That’s beyond dumb. For someone like me who actually uses their trailer, I will wear out and break those boards LONG before they decay from the whether. Leave them untreated, and replace as necessary.
Great job. I love your comments. Did you fix the worm hole? How did you fix it?
That's a great looking trailer, one thing I'd do is add a dunnage box. Sup Stoma Steve!
Super, thanks.
That was cool. I would like to see you pull a rig that won't roll. I know it can do it. I just want to see it done with that setup. A+
I did that today with a 4 door long bed truck and you'll see it in the next video
Just showin off with the stick welder 🙂
I was wrong to ask about roller bar, your idea on low pull hookup much better and can be taken off since not permanent.
I have an antique Miller stick welder aaalll to myself cause my business partner can't weld stick AT ALL.. he does fair to middlin with wire but he lets me run all the welds..
Enjoyed your great videos and great job of your welding abilities. I’m ready to see all these things in action, what is the rope rated at, I’ve must have missed that. Keep them coming!👍👍👍👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
25k pounds
Just a thought why not get a pulley you can lay the winch rope on and mount it to flat bar with a bar stock post. Then drill a hole in the trailer to drop it in where it’s close to rubbing?
I can't stop laughing. "Bite Me" 😂.
Dude, you crack me up, always a good laugh with you. Do you watch Vice Grip Garage?
A leather apron should protect the bag from sparks while still allowing the sides and back of your body to stay reasonably cool...
He amazes me...everything "seems" easy if he does it.....
Casey if one wanted to learn about Welding what is a good resource 101-Welding?
I like what you did. I’ve purchased from e-trailer several times and never had an issue but I’ve had issues with ebay. Lots of Chinese knock off junk. Got to be careful.
Regarding returning the wheel and tyre, I agree with you but whether it is legal or not I don't know. I am in the U.K. and had the same sort of thing. The police contacted me with threat of arrest. I told them to come with a van so they could get the item and return it at the same time. I never heard from the police or the seller again.
We don't concern ourselves with things like, "legal"....
Keep it good job doesn't have to look pretty just. Work
I think the warn and Ramsey winches are much better,. I have some harbor freight winches. Theirs usually have permanent magnets instead of normal field coils so they eat up battery much faster and run Hotter. Just my experience with them. I do have some harbor freight winches. But only use them for stuff that's not near as demanding. Like on a motor hoist or something short throw, something where they only run for a few seconds.
Gotta suggestion..why not use a snatch block to lower your pulling angle? Also can use it to double your pulling power if need be
A recovery ring is a snatch block.
Love the content! Congratulations on 10 K subscribers!!!!!
Thank you! I just noticed the 10k!
@@CaseyLaDelle 🤜🤛
You're a man of many talents, Casey!
Is there any kind of job that you haven't tried yet? ;-)
That's a neat saw, with so many options in angles and the ability to actually cut across wider parts: Need to get me something like that as well! :-)
Also a very well thought out welding cart you have made there!
I assume that there's one more thing you might change about that trailer: Change the Big Bubba's markings to your own company name?
Maybe a roller off the winch if it gets used in the downward pull often enough.
@@larrybe2900 no roller needed with synthetic rope
@@CaseyLaDelle
Understood, but friction over time will degrade anything which is why I offered if used a lot. With the D-ring available you may be tempted to use this feature more often than anticipated. While you are feature packing this trailer for your use have a removable roller at the back just in case as well. Food for thought. Good stuff you have.
@@larrybe2900 no, synthetic ropes are and hawse fairleads are designed to work together, you're not supposed to use rollers fairleads with them.
@@CaseyLaDelle
Thank you.
I am out of practice welding and I wish I could get as good as that. No marks on the screen I can see. Casey what model GoPro are you using?.
Hero 9
Work smarter not harder!
why not use roller bar on lower frame to lower winch line
👍
Casey i noticed the bag, are you on any specific diet to help? My brother has chrons and is on the specific carbohydrate diet and has blown away the doctors with the results vs taking steriods or surgery.
No diet that helps, but definitely things that I have to avoid to prevent blockages. Pretty much anything that's difficult for the average person's intestines to digest is impossible for mine to digest, because I'm missing most of them
Used motor oil as a deck preservative. No it does not make it slippery, don't go overboard in the amount that is applied.
Now you can sell that Warn pay for all of the new stuff.
Solid work. So did they ever fight you over that tire? 😂😂
Nope
Will you talk about why you have the bag
I have quite a few times
What kind of blade do you use on your cutoff saw? I have a 12” saw I want to get a metal blade for and don’t have any idea what will hold up the best?
I use the Evolution blades made for that saw. But you can't just throw a metal blade on any miter saw, the ones made for cutting metal turn at a much slower speed. A normal wood saw turns way too fast and will destroy the blades quick
That makes sense I didn’t think about the speed factor. Well then I guess I’ll have to find me a saw like yours.
Those are likely the best welds on the trailer. Also, nice bag...do you have crohn's disease?
Ulcerative colitis
My badland zxr 12000 pound winch will always have cable on it never synthetic rope . Because cable is way more stronger and easy to handle
Actually, the synthetic rope is actually stronger when it comes to breaking strength. But the cable is more durable when it comes to abrasion resistance
Hey Casey, Looking at how that ring is connected to the soft shackle...shouldn't it be on the knot side? I think I saw a video somewhere telling me that's how it should be done. 😄 If I'm wrong, apologies.
It really doesn’t matter
@@CaseyLaDelle hey now, it was your video that told me that. LOL. Keep up the good work. Just sold my motorcycle to a guy from Oregon not 10 mins ago. (I’m in AR). He’s on some kind of rally and his engine blew.
But....your welder is nicer than mine lol
Why can't you make a wide leather belt to wear over your bag for summer? It would protect you w/o having to wear a full jacket....
Good job Casey. Only I am not a fan of Chinese made products, even though it is not easy to avoid them. Take care and be safe out there.
Dude even with the stick welder I had to cover the screen it hurt my eyes
I have heard that the Synthetic rope degrades when exposed to UV Light. Have you seen that happening?
Nope, but mine also gets used almost daily, instead of sitting there in the sun for weeks at a time like most
Why do you prefer Badlands over Warn???
Because I like reliable winch’s and companies that stand behind their products
Your welds don't need to be perfect, because "A grinder and paint make the welder I ain't."
Why do you have a colostomy bag?
Probably because he had health problems. I had a bowel cancer tumour removed in 2017 and had a colostomy bag for a year and a half. Life goes on and you can live with a "bag" . Choice of life with a bag or death I would chose life with a bag again.
It's an ileostomy bag. I had very severe ulcerative colitis and had my large intestine removed
What Size Generator do you use
Generac 8k running watts, 10k surge
@@CaseyLaDelle oh ok n I bought a 6000 watt n wondered if that would work n I'll have to try it
lol sounds like e-trailer gave you a free tire, i wouldn't send it back either, there error there cost...
No point if the jeep has a winch already.
So Shit Happens is a colostomy bag?
It's a possibility, I was too afraid to ask.
@@Green_Reaper_33 Thats what i thought too. But i ask 🤷♂️No such thing as a bad question
Ileostomy bag.
@@CaseyLaDelle Never heard of it
1:05 AND the refund of the "fast"-shipping rate...
Never work for free because of another companies failure. If anything, you should bill them for your time dealing with it.
I like the sign on your bag but you might want to change that to "Doo-Doo Occurs" so you don't offend anyone! Haha!
Worn is way better
Then why are all my Warns broken and my Badlands are still going strong??
My table is much nicer. Lol
I realize you had a bad customer experience with ETrailer with vendor…. Well shit happens… everyone has good and bad days. I will say I’ve had excellence experiences with them and great customer service. You’re not me… I respect your experience but it seems like you’re a little harsh on this vendor…