Thank you, I was able to correct the issue of the door not closing properly only because of your very clear tutorial and video! Thank you for sharing your knowledge. It is very much appreciated.
Donna Janiszewski Hey Donna, thanks for watching & we are happy the video helped. We appreciate your comment! We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thank you Michael! In my case, intermittently the door would start to close for a second or two then return open. I found the green sensor LED flickering during operation. Cause of problem was loosely mounted sensing LED, vibration of door closing was shaking receiver. Tightened wing nut and back in business. Thank you for your video.
Randy Rey Thanks for watching Randy. Glad to help. Keep us posted on your project. Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for sharing this & we appreciate you watching. Welcome to the DIY Raptor Club. Sounds like you’re back up and running. Hope all is well, enjoy your day. 😎👍🔧🔩
My situation was much the same as many others: door would open from touchpad but not anything else, then would not close anytime thereafter unless you held down keypad opener until fully closed then release. Figured it must be sunlight overpowering sensors light and ordered 2 new sensors. While inspecting wiring (OK), noticed back of 1sensor was not fully snapped together ( ladder in that area had been moved and dislodged slightly the back cover. Pressed sensor & back cover together, everything works now.
Ronny Russell Thanks for watching Ronny, great find! We really appreciate you sharing. We have the same storage spot for our ladder...literally right by the sensor. We should probably move the ladder to a better location. Your comment will be helpful to future viewers. You Rock. Let us know if you have any questions. 😎👍🔧🔩
Thanks for watching & that’s great. You can spend that $100.00 on something more enjoyable. We appreciate you reaching out to us. Enjoy your night. 😎👍🔧🔩
celka24 Thanks for watching & you are very welcome! We appreciate you reaching out to us. Keep us posted on your DIY project & any questions you run into. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Mandee Wells Thanks for watching. Glad to help Mandee. Us fellow DIY’ers need to stick together. Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Marykay K Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Probably the easiest homefix I've ever had to do thank you very much one of my sensors was dislodged and had to be tightened. Thank you thank you thank you
Jesse Hubbard Bey Very cool! Thanks for watching & we hope you enjoyed the video. Glad to hear the home repair was successful. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩
Thanks for watching & welcome to the DIY Raptor Club. We believe once...twice at absolute most...in the life span of the unit. Hope this helps. Enjoy your night! 😎👍🔧🔩
Thank you for sharing your knowledge. My garage door can not open, sensor lights are off, Genie garage opener is on. What can I do? Thank you in advance.
Thanks for watching & welcome to the DIY Raptor Club. We are unfamiliar with the Genie. Has anything changed...? New WiFi, new electrical wiring installed anywhere in house...new security system installed, new power lines within close proximity of home?
Mine had the round light flashing. The sensors had the green and red light showing and all looked great. Then I read where the sensors can malfunction if the lens are dirty. I cleaned the lenses and it was fixed!
Gary Lee Thanks for watching & we hope the video helped. Is your garage door opener a chamberlain brand? If yes, how many times is your light flashing after you press the wall mounted push button. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
You seem to know alot about these garage door systems. See if you can figure this one out; wall push button light is flashing continuously and will not operate the door. Except if I somehow mess around with the "lock"button, in which case it MAY open but then starts closing before it's up all the way. Remotes work. Keypad won't work. Sensor lights are on and are working properly. I can play around with all the buttons and get it to open and then I just stand there and watch it go partially up and then partially down and then partially up then partially down... all by itself! The light on the motor does not flash.
Tyrone Shoelace Thanks for watching & we hope you enjoyed the video. If you push the wall mounted button, how many times does your overhead lights flash? Let us know if you have any questions. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩
Mike L You’re welcome Mike L! 😀 We appreciate you watch and hopefully this video helped you solve your DIY project conveniently. Definitely let us know if you have any questions, we are always here to help. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Michael Borders: Thanks for your prompt reply! We misplaced our book. We have a Chamberlain chain drive and its almost identical to yours. The carriage was bound up real tight. Physically the opener is trying to open the door but the carriage won't move. I took the pin out of the bar that connects the door to the opener. Now it will move. Not sure what caused it to bind to begin with. Anyway I'm trying to remember how to re program both directions. So I (1) press and hold the teach button. (2) Press the up button until the door is fully raised. (3) press and hold the down button until the door seals on the floor. .... after that not sure...should I press the teach button again, I think I'm leaving something out haha...If you have time I appreciate it, very much!!
Mike L Thanks for the reply. Let’s get your system back to normal! 😀 Below is a link to our step-by-step video that shows how to reprogram your Travel System, you my find this very helpful! th-cam.com/video/M6d9IMjyze4/w-d-xo.html Hope this helps & keep us posted! 😎👍🔧🔩
I have 3 overhead garage doors using the side winders motors mounted on the side of garage door. I do have 2 ceiling lights trade off flashing when the doors don't close. The doors will go sown a couple inches and then one of the overhead ceiling lights will flash 10 times indicating sensor, wiring and misalignment issues. The problem is only when closing the garage doors doesn't matter which door and it doesn't matter whether you are using the remote from the car or standing in the garage using the manual button. The only way I get the door to close is hold the manual button down until the door is closed all the way. Sensors have the ambler and green lights for alignment but still problems. I'm guessing there's some kind of frequency interference. I hate to call a door tech out and they come out and do a couple things and the doors are working when they leave but then the next day the doors will be back to their usual erratic behavior. Any suggestion. Doors are 9 years old. Chamberlan Liftmaster Elite Series model 3800. Oh yeah the ceiling lights are just as erratic, they come in via motion detection but are suppose to go off after a few minutes. Sometimes they just stay on all night. I will push the manual light button and one light will go off and then the other light will come on. Sometimes pressing the button twice will turn both off. We have changed the bulbs in these too and they are just your regular cheap light bulbs, No LED's.
Earl Balentine Earl, how have you been? Great to hear from you. Let’s get this figured! By chance, do you have new LED bulbs installed in unit? We ask because more times than not, LED lights installed in older units can interfere with the signal thus causing degraded performance with your system. Keep us posted! Hope all is well! 😎👍🔧🔩
@@DIYwithMichaelBorders I have removed the LED lights in my ceiling lights but my outside coach lights have LED's light bulbs maybe I should remove them too since they are so close to the garage door. I also removed all my wifi cams near the garage. I even add additional wiring to the antenna because the door would only open if I was within 5 feet of the door, so I always had to get out of the car to use the remote. The longer wiring has help now and can open the door from the street now. Tomorrow morning I'm going to try the reprogramming of the motors to see if that's the problem. I have adjusted the sensors until I'm blue in the face.
Earl Balentine Thanks for the reply. It’s also possible that your remote button is losing its top notch condition. Try pressing & holding remote button down for 3-5 seconds. If it works at longer distances...& it doesn’t work when just tapping on button, your remote is fading away & will fail all together sooner or later. 😎👍🔧🔩
@@DIYwithMichaelBorders I have 3 remotes with all new batteries, I only use the one remote for the stall I park in. All 3 remotes have 3 buttons and all 3 are program to open all doors. The 2 remotes that I nee=ver use don't work either. Everything works when the doors are working once the door won't go down it doesn't matter whether you try all 3 remotes, try the manual wall button or even the remote keypad outside mounted on the side of the door. The problem exist with the remotes and the manual wall buttons at the same time. So I don't think my problem is the control wireless remotes or wall mounted buttons. I wish I could add a quick video here.
Earl Balentine Thanks for the reply Earl. As the units continue to age, you may be stuck with stubborn & annoying behaviors from the remotes....unfortunately...however normal. 😆 The remotes internal motherboard can begin acting intermittently when just the slightest trace of corrosion is preset on electrical leads. 😎👍🔧🔩
i have 5 green light flashing on my genie pro and it makes mechanical noise in the opener machine. The chain doesnt move. Seems like chain is not properly connected to the motor based on the noise. What could be the issue?
tomal_rocks Thanks for watching. If you are hearing mechanical noises or grinding, it’s very possible that your chain has become disconnected from the track and motor. The motor is most likely doing what it is supposed to and attempting to grab ahold of the chain links to open and close the door...however...the sound you are hearing may be the internal motor attempting to grab ahold of the chain, but while doing so...it’s missing the links. Keep us posted. Us fellow DIY’ers need to stick together, many more helpful videos to come! 😀 Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Charles Mcfarlane Thanks for watching & we hope you enjoyed the video. That’s odd. You may need to switch back to the manufacturers recommended bulb & install their branded bulb. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😀👍🔧🔩
My light next to the learn button flashes irregularly. I tried to reset but continues to do the same. The sensors light up the way they’re supposed to. What can be the issue
BBQ Made Easy Thanks for watching & sharing your experience. Let’s get this figured out! After reading your comment, we are leaning toward your Travel System. Below is a link to our step-by-step video that shows how to reprogram your Travel System...this may fix your issue. th-cam.com/video/M6d9IMjyze4/w-d-xo.html Keep us posted! Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
I have 3 side winders Liftmaster garage door openers. All 3 of them will open with no problems. But when I go to close them most of the time the door tries to go down about a foot before it returns and the ceiling light is flashing 10 times. I can hold the button down and the door will close as long as I hold the button until its all the way down/closed. All my wiring seems to be fine. I hit the reset button for 5 seconds, unplugged power for a minute but still have problem. I use to be a half a block away the doors would open with the remote, now I got to get out of my car and be within 5 feet of the door for it to finally open. I check the sensors and one is amber color and the other is a very fast flashing green, I tried to adjust it but the green light goes out all together. Any ideas before I use dynamite : ) I should add that the doors have all worked fine for 8 years only in the last several months they been erratic.
Earl Balentine Thanks for watching. 10 flash indicates that your sensors are off set or dirty. It’s very possible that the laser lens is dirty and leading to erratic and faulty readings. Also check the wiring connections at both sensors. One sensor should be Amber and the other should be Green. It’s also possible that your sensors are not properly secured to the mount and as the door is opening and closing, the slightest vibration is leading to a misaligned sensor. Keep us posted. Let us know if you have any questions. Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
I cleaned all the sensors lens and the one sensor that was flicking green is now a steady light. I will go around with a wrench and make sure all the hinges and rails are tight. I appears I have more problems with the doors when the sun is rising or sitting low or high with the sun shinning directly into a sensor. When the sun is sitting (evening 5pm) with my garage doors facing north the western sun shines directly into the sensor. If I stand and block the sun and create a shade over the sensor the door closes find. Again as always the doors don't have a problem opening but always closing. My remote still has a very short radio distance trying to open the door from the outside in my car. I have to get out and walk up to the door for it to open : (
@@DIYwithMichaelBorders Iinstalled 20 feet of small gage wire connected ted to the antenna wire coming out of the light fixture. Seems like it helped some but I still have to be right in the drive way in front of my garage door before it opens with the remote. I attached the wire from the center of the garage with the light/antenna was exposed, tack the wire from center all the way up front at the top of garage door and them down to the corner of garage door. I was expecting the garage door open as I was coming down the street but will not open until I get in the drive away and press the remote 10-15 times before it opens. Not sure where to go from here?
Jose Cordeiro Thanks for watching & great question. Some manufacturers will make sensors that are compatible with other units of the same brand. If you purchase a unit that is a different brand than your current unit, it’s unlikely that the old sensors will communicate to the new unit. Hope this helps. 😎👍🔧🔩
Mine has 4 orange blinks inside the motor. I hold to clear it but it comes back. Both sensors are acting properly, solid amber and green lights. When I hit the light on the opener itself it turns the lights on for half a second and they won’t turn on. Never changed the bulbs from when it was working before. Door will open fine but will not close without holding the button, any thoughts?
Thanks for watching & welcome to the DIY Raptor Club. We recommend re-programming your Travel System. Below is a link to our video showing this procedure. th-cam.com/video/M6d9IMjyze4/w-d-xo.html 😎👍
Hi, I’ve checked all wiring and the safety sensors are good and properly lit, but the door still won’t close without holding the wall button. What could be the issue?
Lax Gaming Thanks for the reply & it’s very possible. By chance do you have LED lights installed in the garage door unit? If yes, try removing those and installing regular incandescent bulbs and see if that fixes the problem. Certain brand LED bulbs can cause interference with the frequency and cause issues. Keep us posted. 😎👍🔧🔩
DIY With Michael Borders it’s a single incandescent bulb. I’ve also gotten new sensors just in case, still a no go. No matter what, I can reset the error and in a couple seconds it starts flashing again without me touching anything or any wires connected.
Mr. Norman Thanks for sharing. Your remotes are not working correct?...may need to reprogram your remotes. Are there LED bulbs installed inside garage door unit? Certain brands of LED bulbs will cause interference with your garage door frequencies thus causing symptoms like yours. Keep us posted. Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and ring your TH-cam bell 🔔 that would be awesome thanks again! 😎👍🔧🔩
My door will go down until a foot before closing and then opens back up light flashes 10 times. The Eye-beams are clear and clean. door does not get caught up on anything rails are new. The door was just installed two months ago. Called installers.. one week for appointment, with service charge because they feel it is not a parts issue. If I can figure it out before they show up and charge me.
Thanks for watching & welcome to the DIY Raptor Club. Let’s try to figure this out. Flashing 10 times is almost always an issue with the lower sensors. Are the sensor lights illuminated?
Hi I have a problem, lights are flickering constantly, I have change logic board checked the wiring, it worked for few times and same problem(lights are flickering constantly) Any solution?
Thanks for watching, there are two common causes that lead to this. 1. Lock button is turned on. We recommend turning Lock button off. Button is located on wall mounted push button unit & will need to be pushed for 5 seconds for Lock mode to disengage. 2. Faulty sensor. There are two safety reverse sensors. If one is faulty or unplugged, lights will flicker continuously. Please keep us posted on your project.
@@DIYwithMichaelBorders Thanks for your feedback regarding the flickering lights. The misaligned sensor eyes have been corrected and everything is working fine !!!!!
DIY With Michael Borders Hi Mike. The unit itself is blinking (green light) 5 times. Not the sensors on the garage door but from the ceiling where the unit is. Any suggestions?
April D Williams Thanks for watching, let’s get this figured out! 1st: Verify no objects are stuck inside & along track...leaves, acorns, gravel particles... 2nd: Unplug unit from ceiling outlet and leave it unplugged for a minimum of 5 minutes. After 5 minutes, plug unit back in and test garage door unit. Let’s start there as it will keep money in your pocket. Keep us posted. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
Mario Wilson Thanks for watching & we hope you enjoyed the video. After reprogramming your travel system, there is a chance that your remotes do become unprogrammed and will need to be reprogrammed... which is a pretty quick friendly DIY project. Keep us posted on your project. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
My green light continues to blink no matt how much I adjust it, (new sensors) and I cleaned the lens and remove all objects from the sensors' path. Could you offer other troubleshooting to make the green light stationary?
Thanks for watching & welcome to the DIY Raptor Club. Check to see if your system is in lock mode. Below is a link to our video showing more info on this. th-cam.com/video/n4h9QNoHYoI/w-d-xo.html 😎👍
@@DIYwithMichaelBorders, wow. I was hoping for an answer but did not expect one so quickly. Thank you and thank you for the link. I will definitely use it. I subscribed while viewing your video.
@@thebastardgift Thanks for taking the time to reply. Us DIYers need to stick together!!! Did the video we shared help? Thanks for subscribing, we subscribed to your channel as well. 😎👍
@@DIYwithMichaelBorders , I am going to work on my door today and with your added advice at least I am headed towards daylight. Thank you for subscribing to my channel but it may not be of interest to you so if you change your mind that's okay, I am just grateful for the advice.
So where can I find out what the error is if the light bulbs flash twice when I press the control panel button to open/close the garage door? Currently none of my devices are opening or closing the garage!! This is on a brand new home and it was working fine. The safety sensors are lined up so I know that isn't the issue.
Thanks for watching & sharing this. Any update? You can look up your unit model number manual online and find the exact troubleshooting light flash count codes. Please let us know if we can help in any way. Us DIYers need to stick together!!!
Bob F Thanks for watching. Have you completed the troubleshooting steps? Keep us posted. Let us know if you have any questions. Us fellow DIY’ers need to stick together! Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Garage door will go up only so far, then stop. Garage door opener lights go out, will do nothing, wait about 15 to 20 seconds, power comes on and will work for a partial closing with the same action. Motor starter is very hot while this happens, Any ideas ?
Thanks for watching. Have you reprogrammed the Travel System. Below is a link to our video showing how to do this. Keep us posted. th-cam.com/video/M6d9IMjyze4/w-d-xo.html 😎👍🔧🔩
dante ruiz Thanks for watching & we hope you enjoyed the video. Have you reprogrammed your Travel System? Keep us posted. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😀👍🔧🔩
Donald Joseph Wood Thanks for watching Donald! That LED light was already installed by previous owner before we purchased home. Keep us posted with any questions you may have. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Romeo Romeo Thanks for watching Romeo. Great question! Your sensor lights will come on once properly aligned & will stay on. By staying on, this will allow you to verify that your sensors are aligned & they have proper electrical power. Below is a link to our video that shows more about the sensors & how to align them, definitely check it out. th-cam.com/video/FhY7BbrsT4M/w-d-xo.html Keep us posted! Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@@DIYwithMichaelBorders hi Michael...my wallmount inside the garage is blinking slowly, but the other keypad ND handheld remotes open and close the garage opener. What would cause just the wall unit to not work
bosshova23 Thanks for watching. In most cases it may be an electrical wiring issue or the actual mount mechanism itself has failed. We recommend starting with a thorough inspection of all electrical wiring from the wall mount all the way out to the sensors, as well as up to the garage door opener motor unit. Check for any signs of stress, wear & tear along the wires, or any signs of melted wires as a result of overheating or spark/arching. Let’s start there! Keep us posted! Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Rekwan Thanks for watching. It is on some garage door units. We hope the video helped. Keep us posted on your project. Please subscribe to the channel and ring your TH-cam bell 🔔 this will be helpful to us thanks again! 😎👍🔧🔩
Paul Walnuts Thanks for watching Paul. Orange lights illuminate when your system has detected a loose wiring connection somewhere along the system. We recommend inspecting your wiring & try to pinpoint any loose or damaged wiring. Keep us posted. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Zeena Abdura Thanks for watching & we hope you enjoyed the video. Are your lights blinking or stationary? Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
So true, thanks for watching. Below is a link to our video showing us lubricating unit very soon after we took ownership of the home. th-cam.com/video/-fUaIzRShuc/w-d-xo.html 😎👍
Thanks for watching & welcome to the DIY Raptor Club. Two things can cause this. 1. A short in the sensor wiring 2. Black & white wires may be reversed Please keep us posted. 😎👍🔧🔩
My problem is at this time of the year the sun shines directly into the sensor at the proper time in the afternoon. Garage doors work perfect at night and all morning just don't work between 2-5pm in the afternoon.
Tyler C Thanks for watching & we hope the video helped. Have you completed the “Travel System” programming steps? Definitely keep us posted on your project. We are always here to answer questions. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Randy watts Thanks for watching, great question. You can purchase a new battery directly from the manufacturer. A dead battery is a friendly DIY project. You may also find replacement batteries online. Keep us posted with your project. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thank you, I was able to correct the issue of the door not closing properly only because of your very clear tutorial and video! Thank you for sharing your knowledge. It is very much appreciated.
Donna Janiszewski
Hey Donna, thanks for watching & we are happy the video helped. We appreciate your comment!
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders😊😊😊
I watched your video for one minute and fix my problem, thank you
Thanks for watching & welcome to the DIY Raptor Club. That’s great news. A fast friendly fix.
Enjoy your day. 😎👍🔧🔩
Thank you Michael! In my case, intermittently the door would start to close for a second or two then return open. I found the green sensor LED flickering during operation. Cause of problem was loosely mounted sensing LED, vibration of door closing was shaking receiver. Tightened wing nut and back in business. Thank you for your video.
Very cool, that will definitely do it. Awesome job making it a DIY project, enjoy your upcoming week. 👍
Thanks! Good to know the one sensor is green, and 1 is orange in color, and that they should NOT be blinking but solid colours. Very easy fix :)
Very cool & thanks for watching. Us fellow DIY’ers need to stick together! Enjoy your night.
😎👍🔧🔩
Thanks a lot for this video. It helped to fix my opener easily.
You are very welcome, so happy to help. Enjoy your weekend.
😎👍🔧🔩
Great video. Very helpful. Thank you.
Randy Rey
Thanks for watching Randy. Glad to help. Keep us posted on your project. Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Thanks Michael. Very helpful info
We appreciate that & thanks for sharing. Hope all is well, enjoy your night Mar.
😎👍🔧🔩
Very helpful! I needed to hold the yellow reset button and that did the trick
Very cool & we appreciate you sharing this. Sounds like you’re back up and running.
😎👍🔧🔩
He’s the Bob Ross of Garage Openers
Thanks for sharing this & we appreciate you watching. Welcome to the DIY Raptor Club. Sounds like you’re back up and running. Hope all is well, enjoy your day.
😎👍🔧🔩
My situation was much the same as many others: door would open from touchpad but not anything else, then would not close anytime thereafter unless you held down keypad opener until fully closed then release. Figured it must be sunlight overpowering sensors light and ordered 2 new sensors. While inspecting wiring (OK), noticed back of 1sensor was not fully snapped together ( ladder in that area had been moved and dislodged slightly the back cover. Pressed sensor & back cover together, everything works now.
Ronny Russell
Thanks for watching Ronny, great find! We really appreciate you sharing. We have the same storage spot for our ladder...literally right by the sensor. We should probably move the ladder to a better location.
Your comment will be helpful to future viewers. You Rock. Let us know if you have any questions.
😎👍🔧🔩
Thanks brother, you saved me 100 bucks!!!!
Thanks for watching & that’s great. You can spend that $100.00 on something more enjoyable. We appreciate you reaching out to us. Enjoy your night.
😎👍🔧🔩
Pretty detailed presentation, great job.
celka24
Thanks for watching & you are very welcome! We appreciate you reaching out to us.
Keep us posted on your DIY project & any questions you run into.
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Job get done! Thank you!
Good morning, you are very welcome. Thanks for watching. 👍
Thank you very much
Jose Cordeiro
You are very welcome. Happy to help.
😎👍🔧🔩
THANK YOU!!💖
Mandee Wells
Thanks for watching. Glad to help Mandee. Us fellow DIY’ers need to stick together.
Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Thanks!! I get it!
Marykay K
Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Thanks 😊
Probably the easiest homefix I've ever had to do thank you very much one of my sensors was dislodged and had to be tightened. Thank you thank you thank you
Jesse Hubbard Bey
Very cool! Thanks for watching & we hope you enjoyed the video. Glad to hear the home repair was successful.
Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again.
😎👍🔧🔩
Very helpful!
How often do you have to change the spare battery?
Thanks for watching & welcome to the DIY Raptor Club. We believe once...twice at absolute most...in the life span of the unit. Hope this helps.
Enjoy your night! 😎👍🔧🔩
Thank you for sharing your knowledge. My garage door can not open, sensor lights are off, Genie garage opener is on. What can I do? Thank you in advance.
Thanks for watching & welcome to the DIY Raptor Club. We are unfamiliar with the Genie. Has anything changed...?
New WiFi, new electrical wiring installed anywhere in house...new security system installed, new power lines within close proximity of home?
Good video thanks
Thank you, & thanks for watching. Enjoy your weekend.
😎👍🔧🔩
Grateful...👍
😎👍
Mine had the round light flashing. The sensors had the green and red light showing and all looked great. Then I read where the sensors can malfunction if the lens are dirty. I cleaned the lenses and it was fixed!
Awesome, & thanks for sharing your experience. Great job making it a DIY project.
😎👍
Hey Mike, I have tried everything you mention but my opener light still just clicks and light flashes? Could be the condenser., how can I tell?
Gary Lee
Thanks for watching & we hope the video helped. Is your garage door opener a chamberlain brand? If yes, how many times is your light flashing after you press the wall mounted push button.
Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
You seem to know alot about these garage door systems. See if you can figure this one out; wall push button light is flashing continuously and will not operate the door. Except if I somehow mess around with the "lock"button, in which case it MAY open but then starts closing before it's up all the way. Remotes work. Keypad won't work. Sensor lights are on and are working properly. I can play around with all the buttons and get it to open and then I just stand there and watch it go partially up and then partially down and then partially up then partially down... all by itself! The light on the motor does not flash.
Tyrone Shoelace
Thanks for watching & we hope you enjoyed the video. If you push the wall mounted button, how many times does your overhead lights flash?
Let us know if you have any questions. Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again.
😎👍🔧🔩
thanks!
Mike L
You’re welcome Mike L! 😀
We appreciate you watch and hopefully this video helped you solve your DIY project conveniently.
Definitely let us know if you have any questions, we are always here to help.
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Michael Borders: Thanks for your prompt reply! We misplaced our book. We have a Chamberlain chain drive and its almost identical to yours. The carriage was bound up real tight. Physically the opener is trying to open the door but the carriage won't move. I took the pin out of the bar that connects the door to the opener. Now it will move. Not sure what caused it to bind to begin with. Anyway I'm trying to remember how to re program both directions. So I (1) press and hold the teach button. (2) Press the up button until the door is fully raised. (3) press and hold the down button until the door seals on the floor. .... after that not sure...should I press the teach button again, I think I'm leaving something out haha...If you have time I appreciate it, very much!!
Mike L
Thanks for the reply. Let’s get your system back to normal! 😀
Below is a link to our step-by-step video that shows how to reprogram your Travel System, you my find this very helpful!
th-cam.com/video/M6d9IMjyze4/w-d-xo.html
Hope this helps & keep us posted!
😎👍🔧🔩
I have 3 overhead garage doors using the side winders motors mounted on the side of garage door. I do have 2 ceiling lights trade off flashing when the doors don't close. The doors will go sown a couple inches and then one of the overhead ceiling lights will flash 10 times indicating sensor, wiring and misalignment issues. The problem is only when closing the garage doors doesn't matter which door and it doesn't matter whether you are using the remote from the car or standing in the garage using the manual button. The only way I get the door to close is hold the manual button down until the door is closed all the way. Sensors have the ambler and green lights for alignment but still problems. I'm guessing there's some kind of frequency interference. I hate to call a door tech out and they come out and do a couple things and the doors are working when they leave but then the next day the doors will be back to their usual erratic behavior.
Any suggestion. Doors are 9 years old. Chamberlan Liftmaster Elite Series model 3800.
Oh yeah the ceiling lights are just as erratic, they come in via motion detection but are suppose to go off after a few minutes. Sometimes they just stay on all night. I will push the manual light button and one light will go off and then the other light will come on. Sometimes pressing the button twice will turn both off. We have changed the bulbs in these too and they are just your regular cheap light bulbs, No LED's.
Earl Balentine
Earl, how have you been? Great to hear from you. Let’s get this figured! By chance, do you have new LED bulbs installed in unit?
We ask because more times than not, LED lights installed in older units can interfere with the signal thus causing degraded performance with your system.
Keep us posted! Hope all is well!
😎👍🔧🔩
@@DIYwithMichaelBorders I have removed the LED lights in my ceiling lights but my outside coach lights have LED's light bulbs maybe I should remove them too since they are so close to the garage door. I also removed all my wifi cams near the garage. I even add additional wiring to the antenna because the door would only open if I was within 5 feet of the door, so I always had to get out of the car to use the remote. The longer wiring has help now and can open the door from the street now. Tomorrow morning I'm going to try the reprogramming of the motors to see if that's the problem. I have adjusted the sensors until I'm blue in the face.
Earl Balentine
Thanks for the reply. It’s also possible that your remote button is losing its top notch condition.
Try pressing & holding remote button down for 3-5 seconds. If it works at longer distances...& it doesn’t work when just tapping on button, your remote is fading away & will fail all together sooner or later.
😎👍🔧🔩
@@DIYwithMichaelBorders I have 3 remotes with all new batteries, I only use the one remote for the stall I park in. All 3 remotes have 3 buttons and all 3 are program to open all doors. The 2 remotes that I nee=ver use don't work either. Everything works when the doors are working once the door won't go down it doesn't matter whether you try all 3 remotes, try the manual wall button or even the remote keypad outside mounted on the side of the door.
The problem exist with the remotes and the manual wall buttons at the same time. So I don't think my problem is the control wireless remotes or wall mounted buttons. I wish I could add a quick video here.
Earl Balentine
Thanks for the reply Earl. As the units continue to age, you may be stuck with stubborn & annoying behaviors from the remotes....unfortunately...however normal. 😆
The remotes internal motherboard can begin acting intermittently when just the slightest trace of corrosion is preset on electrical leads.
😎👍🔧🔩
i have 5 green light flashing on my genie pro and it makes mechanical noise in the opener machine. The chain doesnt move. Seems like chain is not properly connected to the motor based on the noise. What could be the issue?
tomal_rocks
Thanks for watching. If you are hearing mechanical noises or grinding, it’s very possible that your chain has become disconnected from the track and motor.
The motor is most likely doing what it is supposed to and attempting to grab ahold of the chain links to open and close the door...however...the sound you are hearing may be the internal motor attempting to grab ahold of the chain, but while doing so...it’s missing the links.
Keep us posted. Us fellow DIY’ers need to stick together, many more helpful videos to come! 😀
Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
My garage door opener light bulb shuts off after i install new bulb. This occurs after three opens. Is there a short ???
Charles Mcfarlane
Thanks for watching & we hope you enjoyed the video. That’s odd. You may need to switch back to the manufacturers recommended bulb & install their branded bulb.
Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😀👍🔧🔩
My light next to the learn button flashes irregularly. I tried to reset but continues to do the same. The sensors light up the way they’re supposed to. What can be the issue
BBQ Made Easy
Thanks for watching & sharing your experience. Let’s get this figured out! After reading your comment, we are leaning toward your Travel System.
Below is a link to our step-by-step video that shows how to reprogram your Travel System...this may fix your issue.
th-cam.com/video/M6d9IMjyze4/w-d-xo.html
Keep us posted! Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
I have 3 side winders Liftmaster garage door openers. All 3 of them will open with no problems. But when I go to close them most of the time the door tries to go down about a foot before it returns and the ceiling light is flashing 10 times. I can hold the button down and the door will close as long as I hold the button until its all the way down/closed. All my wiring seems to be fine. I hit the reset button for 5 seconds, unplugged power for a minute but still have problem. I use to be a half a block away the doors would open with the remote, now I got to get out of my car and be within 5 feet of the door for it to finally open. I check the sensors and one is amber color and the other is a very fast flashing green, I tried to adjust it but the green light goes out all together. Any ideas before I use dynamite : )
I should add that the doors have all worked fine for 8 years only in the last several months they been erratic.
Earl Balentine
Thanks for watching. 10 flash indicates that your sensors are off set or dirty. It’s very possible that the laser lens is dirty and leading to erratic and faulty readings.
Also check the wiring connections at both sensors. One sensor should be Amber and the other should be Green.
It’s also possible that your sensors are not properly secured to the mount and as the door is opening and closing, the slightest vibration is leading to a misaligned sensor. Keep us posted.
Let us know if you have any questions. Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
I cleaned all the sensors lens and the one sensor that was flicking green is now a steady light. I will go around with a wrench and make sure all the hinges and rails are tight. I appears I have more problems with the doors when the sun is rising or sitting low or high with the sun shinning directly into a sensor. When the sun is sitting (evening 5pm) with my garage doors facing north the western sun shines directly into the sensor. If I stand and block the sun and create a shade over the sensor the door closes find.
Again as always the doors don't have a problem opening but always closing. My remote still has a very short radio distance trying to open the door from the outside in my car. I have to get out and walk up to the door for it to open : (
Earl Balentine
Thanks for the reply. Definitely keep us posted. Us fellow DIY’ers need to stick together. 😀👍
@@DIYwithMichaelBorders Iinstalled 20 feet of small gage wire connected ted to the antenna wire coming out of the light fixture. Seems like it helped some but I still have to be right in the drive way in front of my garage door before it opens with the remote. I attached the wire from the center of the garage with the light/antenna was exposed, tack the wire from center all the way up front at the top of garage door and them down to the corner of garage door. I was expecting the garage door open as I was coming down the street but will not open until I get in the drive away and press the remote 10-15 times before it opens.
Not sure where to go from here?
Earl Balentine
Thanks for the update. Sounds like you’re making progress. Do you have a 2nd Remote you can test from a distance?
When we change the garage door motor you need to change the sensors o you can use the old one
Jose Cordeiro
Thanks for watching & great question. Some manufacturers will make sensors that are compatible with other units of the same brand. If you purchase a unit that is a different brand than your current unit, it’s unlikely that the old sensors will communicate to the new unit. Hope this helps.
😎👍🔧🔩
Best lights for garage door
Thanks for watching. 👍
Mine has 4 orange blinks inside the motor. I hold to clear it but it comes back. Both sensors are acting properly, solid amber and green lights. When I hit the light on the opener itself it turns the lights on for half a second and they won’t turn on. Never changed the bulbs from when it was working before. Door will open fine but will not close without holding the button, any thoughts?
Thanks for watching & welcome to the DIY Raptor Club. We recommend re-programming your Travel System. Below is a link to our video showing this procedure.
th-cam.com/video/M6d9IMjyze4/w-d-xo.html
😎👍
Why is that little green light flickering beside the learn button? What does that mean..mine does that....does it mean there is something wrong
Jay Stokl
Thanks for watching Jay. If green, all is good. What issues are you experiencing with your opener? Hope to help.
😎👍🔧🔩
Hi, I’ve checked all wiring and the safety sensors are good and properly lit, but the door still won’t close without holding the wall button. What could be the issue?
Lax Gaming
Thanks for watching & what’s your update? Is your lights flashing when button is pushed?... if yes, how many flashes?
Keep us posted.
😎👍🔧🔩
DIY With Michael Borders the error code suggests a short whether there are wires plugged in or not, so I’m guessing the circuit board is bad.
Lax Gaming
Thanks for the reply & it’s very possible. By chance do you have LED lights installed in the garage door unit?
If yes, try removing those and installing regular incandescent bulbs and see if that fixes the problem.
Certain brand LED bulbs can cause interference with the frequency and cause issues. Keep us posted.
😎👍🔧🔩
DIY With Michael Borders it’s a single incandescent bulb. I’ve also gotten new sensors just in case, still a no go. No matter what, I can reset the error and in a couple seconds it starts flashing again without me touching anything or any wires connected.
Lax Gaming
Thanks for the reply. It may unfortunately be a faulty circuit board. How old is the garage door unit?
The green light constantly stays on but the red light sensor blinks twice. I can only close the garage door by the main box.
Mr. Norman
Thanks for sharing. Your remotes are not working correct?...may need to reprogram your remotes. Are there LED bulbs installed inside garage door unit? Certain brands of LED bulbs will cause interference with your garage door frequencies thus causing symptoms like yours. Keep us posted.
Us fellow DIY’ers need to stick together. Many more helpful videos to come!
Please subscribe to the channel and ring your TH-cam bell 🔔 that would be awesome thanks again!
😎👍🔧🔩
My door will go down until a foot before closing and then opens back up light flashes 10 times. The Eye-beams are clear and clean. door does not get caught up on anything rails are new.
The door was just installed two months ago.
Called installers.. one week for appointment, with service charge because they feel it is not a parts issue. If I can figure it out before they show up and charge me.
Thanks for watching & welcome to the DIY Raptor Club. Let’s try to figure this out.
Flashing 10 times is almost always an issue with the lower sensors. Are the sensor lights illuminated?
Hi I have a problem, lights are flickering constantly, I have change logic board checked the wiring, it worked for few times and same problem(lights are flickering constantly) Any solution?
Thanks for watching, there are two common causes that lead to this.
1. Lock button is turned on. We recommend turning Lock button off. Button is located on wall mounted push button unit & will need to be pushed for 5 seconds for Lock mode to disengage.
2. Faulty sensor. There are two safety reverse sensors. If one is faulty or unplugged, lights will flicker continuously.
Please keep us posted on your project.
The lights to my garage door are flickering 4 times, do you know what is the air code for 4 flickers?
Malinda Baxter
Thanks for watching. The most common cause is misaligned sensor eyes. Keep us posted on your project.
😎👍🔧🔩
@@DIYwithMichaelBorders Thanks for your feedback regarding the flickering lights. The misaligned sensor eyes have been corrected and everything is working fine !!!!!
Malinda Baxter
Awesome Awesome & we appreciate the update.
😎👍🔧🔩
DIY With Michael Borders Hi Mike. The unit itself is blinking (green light) 5 times. Not the sensors on the garage door but from the ceiling where the unit is. Any suggestions?
April D Williams
Thanks for watching, let’s get this figured out!
1st: Verify no objects are stuck inside & along track...leaves, acorns, gravel particles...
2nd: Unplug unit from ceiling outlet and leave it unplugged for a minimum of 5 minutes. After 5 minutes, plug unit back in and test garage door unit.
Let’s start there as it will keep money in your pocket. Keep us posted. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Hi Mike after I hold the learn button to reset do I have to re learn my different openers and cars?
Mario Wilson
Thanks for watching & we hope you enjoyed the video. After reprogramming your travel system, there is a chance that your remotes do become unprogrammed and will need to be reprogrammed... which is a pretty quick friendly DIY project. Keep us posted on your project.
Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
My green light continues to blink no matt how much I adjust it, (new sensors) and I cleaned the lens and remove all objects from the sensors' path. Could you offer other troubleshooting to make the green light stationary?
Thanks for watching & welcome to the DIY Raptor Club. Check to see if your system is in lock mode.
Below is a link to our video showing more info on this.
th-cam.com/video/n4h9QNoHYoI/w-d-xo.html
😎👍
@@DIYwithMichaelBorders, wow. I was hoping for an answer but did not expect one so quickly. Thank you and thank you for the link. I will definitely use it. I subscribed while viewing your video.
@@thebastardgift
Thanks for taking the time to reply. Us DIYers need to stick together!!! Did the video we shared help? Thanks for subscribing, we subscribed to your channel as well.
😎👍
@@DIYwithMichaelBorders , I am going to work on my door today and with your added advice at least I am headed towards daylight. Thank you for subscribing to my channel but it may not be of interest to you so if you change your mind that's okay, I am just grateful for the advice.
@@thebastardgift
Looking forward to hearing back from you.
So where can I find out what the error is if the light bulbs flash twice when I press the control panel button to open/close the garage door? Currently none of my devices are opening or closing the garage!! This is on a brand new home and it was working fine. The safety sensors are lined up so I know that isn't the issue.
Thanks for watching & sharing this. Any update? You can look up your unit model number manual online and find the exact troubleshooting light flash count codes.
Please let us know if we can help in any way. Us DIYers need to stick together!!!
Mine has same issue, just Bulbs flashing no arrows. Did you get yours fixed?
my daughters sensors, both light then in about ten seconds the green one starts to flash.
Bob F
Thanks for watching. Have you completed the troubleshooting steps? Keep us posted. Let us know if you have any questions. Us fellow DIY’ers need to stick together!
Many more helpful videos to come! 😀
Please subscribe to the channel and Ring your TH-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Garage door will go up only so far, then stop. Garage door opener lights go out, will do nothing, wait about 15 to 20 seconds, power comes on and will work for a partial closing with the same action. Motor starter is very hot while this happens, Any ideas ?
Thanks for watching. Have you reprogrammed the Travel System. Below is a link to our video showing how to do this. Keep us posted.
th-cam.com/video/M6d9IMjyze4/w-d-xo.html
😎👍🔧🔩
Not a C410?
It doesn’t flicker at all and sensors are both on error code 15- it just moves a bit then comes back
Elias Melendez
Thanks for watching. It’s also possible that the belt is too tight or rollers need to be lubricated. Keep us posted.
😎👍🔧🔩
We have constant red and yellow lights blinking, also a beep every minute. What could it be?
Thanks for watching & are you referring to your sensors or overhead motor unit?
My garage door won’t close and I have 2 green lights sensor on
dante ruiz
Thanks for watching & we hope you enjoyed the video. Have you reprogrammed your Travel System? Keep us posted.
Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😀👍🔧🔩
My got wet real good i let it dry but only what
It does in flashing a green light and Orange it
I couldn't tell for sure but, do you have LED bulb installed in your garage opener light sockets?
Donald Joseph Wood
Thanks for watching Donald! That LED light was already installed by previous owner before we purchased home. Keep us posted with any questions you may have.
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
What if sensor light stay on even iff there not facing each other
Romeo Romeo
Thanks for watching Romeo. Great question! Your sensor lights will come on once properly aligned & will stay on. By staying on, this will allow you to verify that your sensors are aligned & they have proper electrical power.
Below is a link to our video that shows more about the sensors & how to align them, definitely check it out.
th-cam.com/video/FhY7BbrsT4M/w-d-xo.html
Keep us posted! Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders hi Michael...my wallmount inside the garage is blinking slowly, but the other keypad ND handheld remotes open and close the garage opener. What would cause just the wall unit to not work
bosshova23
Thanks for watching. In most cases it may be an electrical wiring issue or the actual mount mechanism itself has failed.
We recommend starting with a thorough inspection of all electrical wiring from the wall mount all the way out to the sensors, as well as up to the garage door opener motor unit. Check for any signs of stress, wear & tear along the wires, or any signs of melted wires as a result of overheating or spark/arching.
Let’s start there! Keep us posted! Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Is Amber a normal color?
Rekwan
Thanks for watching. It is on some garage door units. We hope the video helped. Keep us posted on your project.
Please subscribe to the channel and ring your TH-cam bell 🔔 this will be helpful to us thanks again!
😎👍🔧🔩
What if blinks twice and nothing happens. Please give me some ideas
Mansoor Mohandessi
Thanks for watching, depending on your model, this means your sensors need to be realigned.
Orange lights?
Paul Walnuts
Thanks for watching Paul. Orange lights illuminate when your system has detected a loose wiring connection somewhere along the system.
We recommend inspecting your wiring & try to pinpoint any loose or damaged wiring.
Keep us posted. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Yellow light & green light is on, but door still will not close.
Zeena Abdura
Thanks for watching & we hope you enjoyed the video. Are your lights blinking or stationary?
Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
You might want to grease those wheels they are very noisy lol
So true, thanks for watching. Below is a link to our video showing us lubricating unit very soon after we took ownership of the home.
th-cam.com/video/-fUaIzRShuc/w-d-xo.html
😎👍
Mine blinks twice, push buttons work but not the remote
Thanks for watching & welcome to the DIY Raptor Club. Two things can cause this.
1. A short in the sensor wiring
2. Black & white wires may be reversed
Please keep us posted. 😎👍🔧🔩
i replaced the led lights and it works fine. i guess it doesn't like bad led lights.
Thanks for watching, some units can be a bit stubborn when asked to get along with LED lights. 😁👍
My problem is at this time of the year the sun shines directly into the sensor at the proper time in the afternoon. Garage doors work perfect at night and all morning just don't work between 2-5pm in the afternoon.
Replaed the sensors and everything is good. The sensors appear to be fine but they grow weak over the years.
My safety sensors are both lit nothing is in the way and it keeps giving me an error that there is an obstruction
Tyler C
Thanks for watching & we hope the video helped. Have you completed the “Travel System” programming steps?
Definitely keep us posted on your project. We are always here to answer questions. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Blinking
Thanks for watching, let us know if you have any questions. 😁👍🧰
Is not even turn the light on that is mean is broke somebody Who Know the problem can tell me please
So what if the battery is dead
Randy watts
Thanks for watching, great question. You can purchase a new battery directly from the manufacturer.
A dead battery is a friendly DIY project. You may also find replacement batteries online.
Keep us posted with your project. Please subscribe to the channel and turn on your TH-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Oil your rollers.
What if linear is blinking on word ~ Learn
Dumb title. Very misleading. A more suitable title would be “WHY GARAGE DOOR WONT CLOSE & WHAT THE FLASHING LIGHT MEANS”
We appreciate you sharing your thoughts, please let us know if you have any questions.