Chamberlain garage door wont open - blinks/clicks every 5 seconds
ฝัง
- เผยแพร่เมื่อ 13 พ.ค. 2020
- We suspect our house got hit by lightning or a power surge and knocked out this Chamberlain garage door opener (part # HD950WFi). Then panel was unresponsive and the garage door opener would only click and blink every 4 to 5 seconds. This was caused by a faulty logic board.
I replaced the logic board (part # 050DCTWF) and this cleared up most of the issues. But I discovered the control panel was also busted. I replaced that as well (part # 41A7305-1) and it cleared up all the issues.
Link on Amazon: amzn.to/3jJohe3
link to the owners manual for the HD950WFi:
embed.widencdn.net/pdf/plus/cg... - แนวปฏิบัติและการใช้ชีวิต
Thank you so much for this post. We just had a huge rain storm and feared our garage door opener had given up the ghost. I disconnected the power and battery for about 5 minutes. When I reconnected the battery and power, the garage door opener came back to life like the true champ that it is.
I have the exact same issue. Lightning struck our house and I was trying all kinds of things to hopefully get it working again. But nothing worked. The lights are flashing just like yours. I will go ahead and replace the whole darn thing, even though it’s only 3 years old. Don’t care to mess with it. Thanks a bunch for your excellent video. Told me everything I didn’t want to know but needed to know. 😊👍
Thank you for this video!! It actually helped me resolve a problem I had with a new installation. I had just installed a brand new Chamberlain, set the travel limits, and when I pressed the wall control, it would not open. It would just blink twice. I spent a couple of hours rechecking wiring, sensor alignments, etc. Then I noticed how you set your travel limits and how you then had to do a test open and close at the end. I did not do the test run when I set the travel limits. Once I saw your video, I decided to reset the travel limits again, did the test open and close at the end, and now everything works! Chamberlains instructions and troubleshooting guide sucks. Their instructions just say set the open limit, set the close limit, the unit will blink twice, and you are done. What morons! I've done several installs, but this was the first time I ran into this. Your video (though it was for something else) helped me out tremendously! I would have assumed I bought a defective unit, would have taken everything down, returned it, installed a new one, and the same thing would have happened again. THANK YOU!!
I have a brand new chamberlain garage unit and it simply won't open or close. No motor activity. Sensors in place. Wires in place. The lights activate when remote opener is pressed but no movement.
Picked up some good info on the programming, setting door stops, etc, but video is worth watching if only for the Lt. Dangle cameo appearance.
Dying at the sound track part 🤣
If you just installed your new Chamberlain system, you need to set the travel limits first. I learned the hard way, because mine didn't come with assembling instructions.
This video was more informative to me than other videos I’ve watched. Thanks
If your garage door opener is ticking like a clock, it probably just means you need to adjust the sensors. I just adjusted them by hand, they're aligned when the LED light turns green on mine and it worked again.
You gave me a nice morning laugh with the kids clip (just what I needed for Monday)
Your video was very helpful and you made it all look easy for someone like me that's not that handy.
Lol. Love this guy humor. "Being reasonable is not really my thing." I'm probably find so much humour in that because it sounds like me.
great video.i was on board with the repair until the wall button/panel. think i'll buy a new one....and a surge protector 😆
Awesome helpful video with some good laughs 👍🙌🏼
Thank you I have the up arrow blinking once and down arrow blinking 3 times. Will try your method. Thank you.
so my sensors are okay, but suddenly, the craftsman garage door opener stopped operating, and the yellow LED is slowly blinking, why suggestions? It seems like the control unit that is attached to the wall is not responding, for some reason. Only lights get turned on when you cross the sensor path.
Same here. Last chamberlain I buy. Didn't even get hit by lightning.
Love the narrative and video kid comment insert. Well done.
loved the Personality bro 🙂
Mine died after 4 years too. Are these designed to die after 4 years? My home definitely was not hit by lightning.
Mine works sometimes, i reprogrammed it but only works for a day or so
So my problem is that the remote and manual control works .. when the garage door goes fully down it’ll have a clunk and then reverse back up . Once fully back up another clunk and flashing lights
Sounds like you need to reprogram it
First thing I would do is clean up that unit, that thing is nasty.
Great job man!
unexpected letterkenny!! plus 14 points
Omg thank you so much! This helped me
thanks.
Too funny. Great video
Love 5:10 - 5:15
FEELS
Nice fix. But dude don’t be lazy clean the garage door opener and around the sensors
Mines.doing the same I'm hoping my battery dead cause shit mines only.two years old
yuk, clean that thing
Ball deep…lmao I know that feeling.
😂😂😂😂😂
aint nobody got time for that....to much work...mine stop working after my brother tried to set it up for myq
Would you like to borrow my vacuum cleaner? :)
Lol!!! 😂
TH-cam lied
Lol
A surge protector will not stop lighting! Waste of money!
Thx sexy. Sorry bro. Just saying. Thx for your help.