How to remove/extract a broken bolt or stud with harbor freight bits and cheap drill
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- So I snapped off 2 header bolts, and had a fun time removing them. first one was easy since the stud stood out, but the other one broke off in head... that was fun.. lucky harbor freight saved the day with their reverse bits!
- ยานยนต์และพาหนะ
Nothing feels better than getting a broken bolt out. Extractor bits are a life saver and I'm glad to see the HF set worked.
After I snapped a valve cover bolt in the head. I can confirm that it is one of the best feelings in the world when you extract it.
Man fought the good fight there!
Had a head bolt do me like that once. Over two inches deep into the block. Glad ya got it. An thanks for sharing for everyone else going through the same b.s.
Love peace and axle grease brother
This video made me way happier than it should have! Love it! Glad you got the bolt out!
I've been struggling with getting 1 broken bolt out all month and I'll never again reuse old bolts after working on my engine. Man thank you for the video. Most of the videos show people taking bolts out on remove engines & blocks. Working in the engine bay is another story!
Yo this video gave me hope I have a snapped bolt in one of my ignition coils
never had them bits break. Love how them bits eat more than other drill bits.
It helps using gear oil or cutting oil on the tips of the drill bits to lubricate and cool them, and it helps to drill into metal big time.
Thanks, it really helps to see somebody do this first.. just broke a bolt off on the oil spinner in my motorcycle crank case 🫣 wish me luck
7 days, 10 drill bits, one broken screw extractor, drilling second time now after bolt snapped. All gone.
Always take your time, yes. Always use good tools, cheap screw extractors may brake eventually. Good drill with good torque and battery makes things much easier and will save you some tears.
Thanks for a great video. Don’t get any type of hardened bolts to replace those. They’ll fail when subjected to the repeated thermal cycles the exhaust manifolds experience. Just my .02 :)
i'm happy for you
loved those cats running around. man i need to get from amazon
If you use a fine teeth socket on the square, you can turn it out with a socket. I can't remember if it's 12 or 16 teeth...
Good stuff! It's getting there.
Its helps to use a high speed drill such as one that runs off a compressor and good bits.
PS The B18B i bought had 2 broken exhaust studs also.
Word of advice. Use cutting oil. All that friction creates a lot of heat
Dip new bolts in milk of magnesia. we used that on jet engine bolts in the navy. hi heat turns milk of magnesia into powder . no stuck bolts
You need a t handle bit holder!
How much for the extractors
Connection between my auger and nut on snowblower sheered. Buying Harbour freight extractor and left bit to see if it worked. So you start with smallest than larger? Already got a small center hole going. Tha’ks
Yes start with smaller
It's a punch
Glad it worked out but plz edit 😂😂