iPad Air No Power Repair - Tristar Fail. Soldering and replacement
ฝัง
- เผยแพร่เมื่อ 28 มี.ค. 2020
- ⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
=================================================== If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com - วิทยาศาสตร์และเทคโนโลยี
Not allowed to do any business in UK,, have to closed my shop for 3 weeks,, in USA is more bad situation due to Corona and I'm amazed you still working.. Be safe
the UK is run by communists, they hate work but love taxes
Lockdown is a joke
Addicted to yours and louis rossman's videos you guys are doing a great work❤️
HE ADDS 10 bucks in solder flux per. I think he gets 55 gallon drums of it from Singapore.
It is interestinc how apple products are designed to make a difficult repair
You are making a great work with this kind of videos, thanks for sharing your experience
I never liked this much someone's videos like yours before! I am on TH-cam from 10 AM till now because of you and i'll probably continue watching :)
I've learned a lot with your videos. And learned also with your mistakes, they show us to be carefull. Thanks for sharing your knowledge 😃
You make the is work seem so easy. I don't know how many gadgets that I loved that I've had to throw away I the past 😞.
Love your work!!
Perfect job .....always there is a problems when try to fix a device tampered with some one ....good luck.
It's always a success because you are a pro sir..
Ultimate work mate... be safe... take care...🙂🙂🙂
Nice rework. And excellent background music while working on small components. Got a touch of some suspicious activity...😎
It is so interesting. I have bounch of hard disk drives, I will try to find the fault and repair them, but first time to learn soldering of smd on donor boards hehe... never done smds before
Good job sir,👍
You always say: "well do something else in the next video" but all you do is repair stuff :D LOL
What are you expecting....a party. Something else means another device repair :-)
@@NorthridgeFix may be some kind of unusual, hard level repair
@@NorthridgeFix Party would be nice :P
How about review of some products related to your work, like that soldering iron you talked briefly in your previous video, the one with super fine tips, have not seen that elsewhere. You could do mailbag videos or ask people to donate non working tablets/phones :D (and hope you dont get a pile of crap) .
Surprising to see repairs on a channel that carries „fix“ in the name. The good thing is : Plenty of other Channels available when you‘re bored over here.
I like it here the way it is.
Take care everybody. :)
He says something else not something different. Let's try baking a cake in the next video
Thank you
I already repaired my ipad
greetings from colombia llanera city villavicencio
Muito bom !!!
Nice work!
nice work well done job salute!!!!!
Thanks for sharing
Virtual high five. 🖐 nice video.
thank you from uk
Great as usual! - Do you sell the Tri-Star tester...? If not were can I get one..? Your tutorials are the"BEST!"....... "BE SAFE!"
Good job sir real appreciate 👍
Best repair videos on youtube!
Your work is osom
Awesome.......
Good job
Oft, I need one of those Tristar testers!
Have you done a replacement video on a motherboard cpu socket 1150-1151-or a 1155? If not that would be one to see. Thanks for your videos.
Over flax good jobs and good luck
Hi Hussein. Many thanks for your videos. Learning alot. Have an ipad 7 (a2197) that is not powering on / display is dark. Consuming 0.08x A (about 80mA). Replaced the USB charging port cable & tristar 610A3B now 3 times (due to alignment without a microscope). Now remaining at this low current. Previously was cycling up to 1.x amps but would not charge the battery as the current draw would increase and remain for a 15-30 seconds and then back down the low current of 80mA. Waiting on a tristar tester (JC U2) but took diode readings (1: 0.306; 2:0.496; 3:0.495; 5:OL; 6:0.306; 7:0.493). Could the tristar still be faulty (soldering)? Do have spares to replace the tristar again if necessary. Could the battery be strapping the boot process? Thanks and stay safe.
Awesome video. Besides your videos, were can I get some cell phone repair training? Online, books...?
Amazing brother
Hi, love the video, I have an iPad Pro, it simply stopped working, completely dead. Took it in to an Apple Store who advised power does Not appear to be getting to the logic board, any advice on how to rectify this and what sort of cost? Thanks.
Awesome....Guru
Nice wark sir 👍
I really admire how to fixed the problem. may I ask where did you buy that camera connected to your microscope? what is the name of that? that blue camera on the top of your microscope. thank you so much...
Wow... ❤
Sir, which magnifying glass you are using can you share link plz
I like how you work with the right tools, it makes the job easier. Please I need those tools, how can I get them? I am in Nigeria.
Awesome ✌️✌️✌️
Nice work
What you use name flux
Thanks 👍😊
Niece video sir
Love your work as always, however i am puzzled most smd ceramic caps are non polarized unlike their electrolytic partners
Isn't that decoupling smd ceramic capacitor non polarized? You had to reverse it? As a non polarized cap surely it could just be left as it was?
The polarity of the cap wasn't the issue. He connected it vertically between two pads when it should have been connected horizontally to a different pad. It's an easy mistake to make when you have 4 pads laid out in a square and the spacing between them is the same. He double-checked his work and corrected it like a pro.
It went from 1 to 2 missing pads. That chip is a 2x2mm an 36 pads.
Only changed a single tristar until now and to be honest i barely had the patience. Twezers i got brand new and very sharp tips seem too big to fit and grab those components
Yeah, forget these components, they were all in the way anyway. More room to manoeuvre... Fair play - Also have you seen the Reko pad repair copper foil based kit, includes uv solder mask, advert on youtube, right up your alley.
Which microscope setup do you use for repairs?
Hi, do you that magnify that you’re using?
Qual modelo da sua câmera do microscópio? @Brasil
Hi, where I can take the same diode that you have solder? D6090? Thanks
What is your temp and your air flow for such small capacitors mine keep blowing away
How you sealing chep taster
hi.. i have a question..
the ic 1610A3 that is tristars of iphone 6s.. are you sure that compatible for ipad air?
What kind off moisture does he use to solder it? Flux?
6:22 was the hot air gun set to tornado? Really curious what happened here
Hello Sir,
which Software do you use for the Schematics?
I am from India big fen
Hi. I have a ipad which is not switching on or even charging. Tried the forced reset but no result. Can you suggest any.
Hi sir what is that tristar tester? Thanks. I wanna buy that
Just had this happen to my 4th gen Air. To
Be honest its my first apple product to have a
Issue. Never dropped or anything 🤷♂️
Now that I see those mini capacitors flying away. Isn't that better to remove them first and put them aside in a paper schematic drawing? It happens to me many times.
Hi
I have an iPad Air WiFi which does not charge ,boots from usb connector but no current draw ! I have replaced Tristar ,still the same ,am getting 1.8 v 3.0v ,any ideas thanks
How long you need to stay with the hit gun on the tristar
Great job again like always
What super microphone do you use right here? 14:43
Hi, Very nice & informative video. I hv a doubt. I think the battery was good, the voltage might be very low so that it can not be charged. If I were u, I would check voltage of the battery and if voltage
Sir good day, I would like to ask, after you place the tristar ic, what do you call the last component you put under the tristar ic? I accidentaly lost that component when replacing the tristar ic on the ipad air that I am working, hope you can help me sir, I believe its a diode but I dont wanna get it wrong, the component is D6090 on the phoneboard and in the pdf diagram, thanks sir, sorry for my bad english
Where i can buy this Tristar Tester Sir. Please provide any link. And also it will work on iphone or ipad if they are not turning on. Thanks
Hi could you recommend a budget Rework Soldering Station, I'm just want to do a few bits as a hobbie, Don't want to spend to much money but also want something that will get the job done? Great Videos by the way, thanks for posting and keep safe
Go with quick 857dw+
what software are you using
what liquid u use to repair that??
I have the same tablet and was replacingthe display and I cannot find the home button locking connector is that something i can find?
heat calibration sir?? microsoldering the tristar
Its like a drug man. The feeling you get after a successful repair. I know this feeling.
Hi my air pad 2, the display has changed colors, but it's not a problem with the LCD but with the motherboard. Could you show me a fix for this problem? Where is the graphics driver in this tablet?
I'd like to buy that tristar tester but I'm getting a 404. Is there a new URL?
How much does it cost to change IC and battery
Oh the good old days before hot tweezers!
BEST REPAIR ON THIS NON TUBE 🥃 HAPPINESS IS ( i seen your exuberance ) NO TOUGH DOGS 🌭 ( it was tough enough anyways, now go make dinner, easy on the "salt", it's the weekend. Uh SALTY Monday is coming, but for the most part you love your job )
Please provide schmatics for apple product or website from where you get them please and thank you
pb phone board
Good work! Where are you getting you music from? Looking for the song around 12:00 minutes. Stay healthy!
I used Shazam and it says the music is 'Mist' by Odonis Odonis
TH-cam audio library free to use music th-cam.com/users/audiolibrarymusic?nv=1
Hi hello I'm getting 0.08 ml amp what I'll be the cause
Friend....you have the datasheet to IC of charge to iPad Air , IC U8100 ( D2089A0) for me help. Thank.....iam Brasil.
very hard job thank you Sir u are pro
Definitely one of the harder Tristars to replace.
+1
Stay positive 😅😅😂😂
very experience 🏆
Can you point me in the right direction I’ve got an iPad and it switches on it won’t charge and it keeps going off every five minutes or so please
The Microscope head ring holder is upside down, Me too i was wrong at first when I bought the microscope.
Yes i prefer it that way.
I wish I were half as happy as you when I do things right at my job.
Crazy looking back at how afraid people were of this.
Как жаль, что Вы не разговариваете на русском! Учу английский)) спасибо, много полезной информации !!!!
Sir I have I pad air 2 a1566 but there is no power it not turning on because there is battery problem I have removed old battery and after 3/4 I have get new battery and I have fix but its not turning on write now
Help me pls
Pls reply 😃
I want Only ask before you fix motherboard why don't try other bettery???
It is like as micro surgery.
❤👌👌👌❤👍
Some pieces flew like ninja lmao, We have more important things to worry aboutl (CORONA) THIS GUY IS GREAT
lmao😂
So this repair retains the memory and data?
Yes. He worked on the problematic power chip. Device's software and your personal data are stored in separate flash memory chips, whatever was on them is still there in exactly the same state as brought to him.
i see that your best customers is the half knowers (if is this correct word).like me..i tryed to fix my mini ipads
( 2 ipads) connectors with the touch screen and if i' ll sent you a foto, you will cry from laughings.i think i vaporised the joins..otherwise how can anyone destroy connections....only half knowers like me.
the bms is, in 80% of the cases, the cause of this battery issue.
It was like surgery