Floating Shoe Stand: amzn.to/3DgEKCv MagWLED Controller Amazon: amzn.to/4gzlM8m MagWLED Controller Direct: bit.ly/3ZQevLR Kuroko Basketball Figure: amzn.to/3ZrvZg8 SK6812 LED Lights: amzn.to/3BrdJvw Buck Converter: amzn.to/4flA5N1 Wire Stripper: amzn.to/3OQZ1RA 🎧🎧🎧 Music (If you buy any of the songs, it helps support the channel) Outro Song: arcadenights.bandcamp.com/track/final-breath-reimagined ============================= Support My Channel Directly: Become a monthly contributor on Patreon: www.patreon.com/ChrisMaherDIY Buy me a Coffee: paypal.me/ChrisMaherDIY ============================== Best Solder: amzn.to/3r6smMA Tip Cleaner: amzn.to/4bNcFiU Soldering Iron: amzn.to/3BKMlWv OR amzn.to/3jxx1mB Solder Smoker Absorber: amzn.to/3Kx6K4T OR amzn.to/3rbHCYp Helping Hands: amzn.to/3v19YG3 Colored Silicone Wires: amzn.to/3Keoel3 Black and Red Silicone Wires: amzn.to/3DTFARN Heat Shrink Tubing: amzn.to/3733zSH BS Knows Best Video: th-cam.com/video/dBMZ5Vgn2Zo/w-d-xo.html My Gaming Room Setup Video: th-cam.com/video/KbbKAxnpCQQ/w-d-xo.html My Soldering for Beginners Video: th-cam.com/video/apSz3NXYlx8/w-d-xo.html My MagWLED Review Video: th-cam.com/video/0a-Y2CMrAiU/w-d-xo.html My Signal RGB Screen Mirror Video: th-cam.com/video/oJSHDFETdV8/w-d-xo.html The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!
There are so many great RGBIC strips and products on amazon that all use the one-wire protocol, it's really great how easy it is to just drop a WLED controller into something and instantly add so much more power. Though sometimes you do get stuck with a red-green-blue-ground LED strip and while those can be neat, they sure are better when replaced with a proper LED strip!
Great mod job one thing to note is on the usb C cable. you mentioned 4 wires and only wanting the red and black. that is correct on the wires for power, however the number of wires could be higher. 4 wires means the usb c cable is 2.0 spec. if the cable is usb 3 or higher spec you will have 9 or more wires inside. the best idea is get a low cost usb c charging cable to mod as a lot of those are like the cable you used or even without the 2 data wire with thicker wires for more power.
Hi Chris, hope you are all well, Got to love a good old WLED hack!, Hope you are ready for Christmas now you have the brightest house in the US! Take care fella 🇺🇸🇬🇧
Chris I love your stuff but I do have a question, I see that you normally just use a ESP32 to run WLED. Curious why you have never tried any of the QuinLED boards or products?
Thanks for watching! Rookie mistake. Since the headphone stand unit has a “dumb” power source, the 12v was being passed to the 5v sk6812 strips. Surprisingly, everything worked just fine which is why I didn’t catch it initially but in theory it should not have worked. (I still don't fully understand why I was not having any issues) The MagWLED-1 controller is able to switch between 5v and 12v power delivery when coming from a usb c type power supply amzn.to/4gBfWUc like I showed in the video I did for the controller. I could have tried swapping out the power supply for a usb c power source but I thought using the buck converter was the simplest and lowest cost solution. Now if you did end up using 12v led strips, then everything would work just fine and you would not need the buck converter so that would be another option.
Thanks for watching! Rookie mistake. Since the headphone stand unit has a “dumb” power source, the 12v was being passed to the 5v sk6812 strips. Surprisingly, everything worked just fine which is why I didn’t catch it initially but in theory it should not have worked. (I still don't fully understand why I was not having any issues) The MagWLED-1 controller is able to switch between 5v and 12v power delivery when coming from a usb c type power supply amzn.to/4gBfWUc like I showed in the video I did for the controller. I could have tried swapping out the power supply for a usb c power source but I thought using the buck converter was the simplest and lowest cost solution. Now if you did end up using 12v led strips, then everything would work just fine and you would not need the buck converter so that would be another option.
Thanks for watching! Rookie mistake. Since the headphone stand unit has a “dumb” power source, the 12v was being passed to the 5v sk6812 strips. Surprisingly, everything worked just fine which is why I didn’t catch it initially but in theory it should not have worked. (I still don't fully understand why I was not having any issues) The MagWLED-1 controller is able to switch between 5v and 12v power delivery when coming from a usb c type power supply amzn.to/4gBfWUc like I showed in the video I did for the controller. I could have tried swapping out the power supply for a usb c power source but I thought using the buck converter was the simplest and lowest cost solution. Now if you did end up using 12v led strips, then everything would work just fine and you would not need the buck converter so that would be another option.
Hello there😀 We're fans of your unique style and would love to collaborate with you on a special promotion for your followers. Wanna learn more about the collaboration?
Chris, I tried hitting you up on Instagram, but thought I’d try here as well. I’d like to pay you for your time to consult in a music studio I’m working on. Hoping to make this an amazing audio reactive LED space and would love to have your expertise in product selection, design etc. Let me know if you’re interested, or can possibly point me to another expert who could help.
Floating Shoe Stand: amzn.to/3DgEKCv
MagWLED Controller Amazon: amzn.to/4gzlM8m
MagWLED Controller Direct: bit.ly/3ZQevLR
Kuroko Basketball Figure: amzn.to/3ZrvZg8
SK6812 LED Lights: amzn.to/3BrdJvw
Buck Converter: amzn.to/4flA5N1
Wire Stripper: amzn.to/3OQZ1RA
🎧🎧🎧 Music (If you buy any of the songs, it helps support the channel)
Outro Song: arcadenights.bandcamp.com/track/final-breath-reimagined
=============================
Support My Channel Directly:
Become a monthly contributor on Patreon: www.patreon.com/ChrisMaherDIY
Buy me a Coffee: paypal.me/ChrisMaherDIY
==============================
Best Solder: amzn.to/3r6smMA
Tip Cleaner: amzn.to/4bNcFiU
Soldering Iron: amzn.to/3BKMlWv OR amzn.to/3jxx1mB
Solder Smoker Absorber: amzn.to/3Kx6K4T OR amzn.to/3rbHCYp
Helping Hands: amzn.to/3v19YG3
Colored Silicone Wires: amzn.to/3Keoel3
Black and Red Silicone Wires: amzn.to/3DTFARN
Heat Shrink Tubing: amzn.to/3733zSH
BS Knows Best Video: th-cam.com/video/dBMZ5Vgn2Zo/w-d-xo.html
My Gaming Room Setup Video: th-cam.com/video/KbbKAxnpCQQ/w-d-xo.html
My Soldering for Beginners Video: th-cam.com/video/apSz3NXYlx8/w-d-xo.html
My MagWLED Review Video: th-cam.com/video/0a-Y2CMrAiU/w-d-xo.html
My Signal RGB Screen Mirror Video: th-cam.com/video/oJSHDFETdV8/w-d-xo.html
The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!
Hey!!! Thanks for the shout out!! Came out great!
Great mod! Helpful tip when stripping small wires you can heat the wire with a lighter and it will simply pull off.
There are so many great RGBIC strips and products on amazon that all use the one-wire protocol, it's really great how easy it is to just drop a WLED controller into something and instantly add so much more power. Though sometimes you do get stuck with a red-green-blue-ground LED strip and while those can be neat, they sure are better when replaced with a proper LED strip!
Great mod job one thing to note is on the usb C cable. you mentioned 4 wires and only wanting the red and black. that is correct on the wires for power, however the number of wires could be higher. 4 wires means the usb c cable is 2.0 spec. if the cable is usb 3 or higher spec you will have 9 or more wires inside. the best idea is get a low cost usb c charging cable to mod as a lot of those are like the cable you used or even without the 2 data wire with thicker wires for more power.
I really need that outro song 😢
Thanks for watching! Check the description :)
@@ChrisMaherDIY ❤️
Hi Chris, hope you are all well,
Got to love a good old WLED hack!,
Hope you are ready for Christmas now you have the brightest house in the US!
Take care fella 🇺🇸🇬🇧
Very cool upgrade Chris!
Quick question, is there a way to code your own WLED effects?
Such a great idea. Thank you for sharing!
Thats sick! I might have to try this!!
I like this… cool project ❤
Indeed oh so mod worthy, thanks Chris!
Chris I love your stuff but I do have a question, I see that you normally just use a ESP32 to run WLED. Curious why you have never tried any of the QuinLED boards or products?
Incredible custom ❤
How come, you put in the buck converter compared to the original video?
Thanks for watching! Rookie mistake. Since the headphone stand unit has a “dumb” power source, the 12v was being passed to the 5v sk6812 strips. Surprisingly, everything worked just fine which is why I didn’t catch it initially but in theory it should not have worked. (I still don't fully understand why I was not having any issues) The MagWLED-1 controller is able to switch between 5v and 12v power delivery when coming from a usb c type power supply amzn.to/4gBfWUc like I showed in the video I did for the controller. I could have tried swapping out the power supply for a usb c power source but I thought using the buck converter was the simplest and lowest cost solution. Now if you did end up using 12v led strips, then everything would work just fine and you would not need the buck converter so that would be another option.
Voltage drop
just make sure there's sufficient cooling, those 144/m LEDs get hoottttt
Why the repost?
Thanks for watching! Rookie mistake. Since the headphone stand unit has a “dumb” power source, the 12v was being passed to the 5v sk6812 strips. Surprisingly, everything worked just fine which is why I didn’t catch it initially but in theory it should not have worked. (I still don't fully understand why I was not having any issues) The MagWLED-1 controller is able to switch between 5v and 12v power delivery when coming from a usb c type power supply amzn.to/4gBfWUc like I showed in the video I did for the controller. I could have tried swapping out the power supply for a usb c power source but I thought using the buck converter was the simplest and lowest cost solution. Now if you did end up using 12v led strips, then everything would work just fine and you would not need the buck converter so that would be another option.
Cuz it's awesome!!!
Thank you Chris.
Thanks as always buddy! Hope you have a wonderful day!
@ 🤝
This is so cool. I love your vids! Need to find the time to add WLED in my life. #lifegoals
How did u find the soundtrack to the vid?
Thanks for watching! Bandcamp! Link is in the description :)
Love your vids but man, what’s your electric bill like? lol. Keep the vids coming.
awesome
Repost?
Thanks for watching! Rookie mistake. Since the headphone stand unit has a “dumb” power source, the 12v was being passed to the 5v sk6812 strips. Surprisingly, everything worked just fine which is why I didn’t catch it initially but in theory it should not have worked. (I still don't fully understand why I was not having any issues) The MagWLED-1 controller is able to switch between 5v and 12v power delivery when coming from a usb c type power supply amzn.to/4gBfWUc like I showed in the video I did for the controller. I could have tried swapping out the power supply for a usb c power source but I thought using the buck converter was the simplest and lowest cost solution. Now if you did end up using 12v led strips, then everything would work just fine and you would not need the buck converter so that would be another option.
Why the reupload
❤
Thanks Chris for making our condo happen: th-cam.com/video/P1snWvbL7W4/w-d-xo.htmlsi=pY1r5ct14bDpfuIR
Hello there😀
We're fans of your unique style and would
love to collaborate with you on a special
promotion for your followers.
Wanna learn more about the collaboration?
Chris, I tried hitting you up on Instagram, but thought I’d try here as well.
I’d like to pay you for your time to consult in a music studio I’m working on. Hoping to make this an amazing audio reactive LED space and would love to have your expertise in product selection, design etc. Let me know if you’re interested, or can possibly point me to another expert who could help.