I felt like I noticed the lash issue first watching through! You lashed and tightened down and when you put the cover on, the right rocker swung! Very nice build!
Drag race series with 3 classes 212-275 then 420- 460 and unlimited this would be cheap way to get people into racing and I would help race development of these engines 😀love to see a road bike long trip where people could come along and join in (wonder how many would take part )
The bolt you've put in where the oil sensor was looked like it was touching right at the bottom of the bolt as it looked worn. That would definitely make the noise we're all hearing. I've had ½ a dozen of those little engines & only 1 has sounded that tappie & that's where the bolt I put in to fill that oil sensor hole was 2 long . . .
I have that same valve spring compressor I bought one from harbor freight that didn’t work on small engines but the one like yours was the best 15 bucks I ever spent I was tired of having sore thumbs and asking my wife to put in the keepers I’m sure I’m not the only one
That is one crazy-loud valve train. I', at the 18:45 Mark and Lonnie coming up that ramp and in the air...the bike sounds like it's gonna throw a rod the tapping is so loud. It's an awesome set up but it sounds like it needs a bit more clearancing and/or valve adjusting or something.
looks like you now need a 13 tooth front sprocket and do not change the rear sprocket. The current sprocket setup is topping out 58 MPH with a 13 tooth front sprocket they might be able to reach 65 to 70 MPH depending on the weight of the rider and reduce the risk of popping wheelies as well.
I have a question my son has a Coleman rb100 mini mini bike. Is there a torque converter that will bolt up to it? Without modification. Any help will be greatly appreciated thanks!
It wasn't something silly like the pushrod not sitting in it's hole on the Cam Follower? I know Assembly lube dries up and can spin a bearing after an engine is built and just sits for years before being rotated, so I don't discount your theory, but the 1/4 inch thing makes me think it was the Pushrod out of it's hole. Also, You May know that Shawn/Sean from Bikes and Beards is now Living in Tennessee... Let's see you two Collab and put a Built 670 in a Harley frame and see if it's faster than a Harley!!!
This thing inspired me big time. I just got a 459 mini bike put together and it's rad. Only thing is the torque converter seems super lazy on takeoff. The bike will not do a wheelie no matter how hard you try. I have a 40 series and I'm wondering if you got any tips to make it hook up harder. Seems like belt slip almost but I'm not sure. You mentioned a few times in this vid that your TC was holding it back but yours still hooks up way better than mine. What can I do?
I was just nonchalantly watchin your videos for my sons mini bike and see the primary school next to my mothers house i had no clue you were in that area i would love to have my sons bike worked on if your shop takes customers
Hey Mr. red beard if you have the poly sticking out the right way,, you won’t have to worry about getting the spring, right I’m having problems taking off🏍️
hey Red could you do a build of a Subaru ex13? i have a hot one for my mini bike even though its a 5.0 and i wanna put a new bottom end and top in it for more comp with a metal plate welded across the top. I cant find parts though other than the carb...
I love what you do but I like things that are dependable when I go riding I go far into the woods I can’t afford a break down. All those mods never hold up you can only ride in a parking lot to be safe.
#brapp been a min but Dino still tuned in hanging in there y’all keep pushing @RBG y’all still my goats 🐐 I’ve learned so much from you simple!!! 💯🖤🦖🫡👀💨
Red beard brother man I have 0 mechanical knowledge so my question to you is if I was to pay you for your time if I was to send you my rt200 mini and a brand new 420cc engine with a tvc would you be willing to put it all together for me and send it back because I can't find anyone locally who's willing and I'd much rather have you do my bike because of your years of experience with mini's brother so please please please lmk if that's not asking to much from one of your long time subscribers and HUGE HUGE FANS???? BUT EITHER WAY KEEP THE GREAT CONTENT COMING OUT AND I'LL FOR CERTAIN KEEP WATCHING EM!!!! ALSO MUCH MUCH LOVE FROM NEW HAMPSHIRE BROTHER!!!!! GOD BLESS!!!!
Love watching people build minibikes professionally and go above and beyond on capability, so awesome 🔥💯
I do 55 with a tork kit on my 212 cc engine thinking bout putting a 450cc in a dirt bike 😅 real power 🎉
Thanks for clean language, I enjoyed watching the ride
Do you ride one of these brother?
Who tooted at 08:28? LOL!! Great job on this one....makes me think about a 420 or 440 for my modified live axle lawn tractor!
I just noticed that also lmao 🤣
Great video, would love to see a 5 or 4 gear transmission on that big block one day
This is exactly the kind of build i want to do. Great video! Thank you!
I felt like I noticed the lash issue first watching through! You lashed and tightened down and when you put the cover on, the right rocker swung! Very nice build!
I suffer from mini bike envy, after watching this!
Drag race series with 3 classes 212-275 then 420- 460 and unlimited this would be cheap way to get people into racing and I would help race development of these engines 😀love to see a road bike long trip where people could come along and join in (wonder how many would take part )
I have a coleman 200, bit looking to upgrade.
The bolt you've put in where the oil sensor was looked like it was touching right at the bottom of the bolt as it looked worn. That would definitely make the noise we're all hearing. I've had ½ a dozen of those little engines & only 1 has sounded that tappie & that's where the bolt I put in to fill that oil sensor hole was 2 long . . .
Do you know if the 420 will fit in a B200R frame or do I have to mod the frame
I have that same valve spring compressor I bought one from harbor freight that didn’t work on small engines but the one like yours was the best 15 bucks I ever spent I was tired of having sore thumbs and asking my wife to put in the keepers I’m sure I’m not the only one
That is one crazy-loud valve train. I', at the 18:45 Mark and Lonnie coming up that ramp and in the air...the bike sounds like it's gonna throw a rod the tapping is so loud. It's an awesome set up but it sounds like it needs a bit more clearancing and/or valve adjusting or something.
looks like you now need a 13 tooth front sprocket and do not change the rear sprocket. The current sprocket setup is topping out 58 MPH with a 13 tooth front sprocket they might be able to reach 65 to 70 MPH depending on the weight of the rider and reduce the risk of popping wheelies as well.
That Rotating Stand Is A Must Have!!!
I have a question my son has a Coleman rb100 mini mini bike. Is there a torque converter that will bolt up to it? Without modification. Any help will be greatly appreciated thanks!
Love your builds an an knowledge of how to do better custom repair an performance awesome job red beard keep up the great builds ....
I enjoyed the video also love seeing the small diesel swaps.
It wasn't something silly like the pushrod not sitting in it's hole on the Cam Follower? I know Assembly lube dries up and can spin a bearing after an engine is built and just sits for years before being rotated, so I don't discount your theory, but the 1/4 inch thing makes me think it was the Pushrod out of it's hole. Also, You May know that Shawn/Sean from Bikes and Beards is now Living in Tennessee... Let's see you two Collab and put a Built 670 in a Harley frame and see if it's faster than a Harley!!!
you make great videos, bub. i just finished my build and it's way too much torque. I'd love to pick your brain. keep up the good work!
Looks like a great setup.
😎👍👍
Knock knock who's there
A rod 🥳🥳
ABSOLUTELY----> OUTSTANDING!!!!!!!!!!. 🙂
Y'all should totally put a peg design on the back that way it brings your center of balance forward on the bike to keep it from lifting up
Watching you build this bad boy is fun, that sucker is gonna thump!
So which one do weget the 440 or 420 which one has more parts available
I felt like i was on speed through half that video. ill keep tweeking, you keep up the great videos!
what is the gear ratio on this build?
might have missed it in the video but it seems like a 50 tooth with the torque it has
I believe it was a 50 on the tire and 10 on the jackshaft.
What break in oil is he using? Transmisson oil?
AMSOIL
What’s the best torque converter for I’m building a same build with a 420cc but a rt200 frame
Throw a higher ramping variator and or lighter weights for it to ramp up a bit on rpm
I have an RT200, essentially the same frame… and I’m wondering if I can maybe copy this build. How do I do it step by step?
Is an 80 mph mini bike possible? How much horsepower would be required?
I'd love to see another 301 build, they're almost half the price of a 420 and have a balance shaft.
What brand of assembly lube was used a year/year and a half ago?
Maxima
thanks for the reply@@RedBeardsGarage
What happened there at 8:28? :) Awesome build. Love it.
That's awesome man ! I'm putting a 420 on my manco big cat . Had one when I was a kid but this gonna have the pep n it's step 😁💪
What state you in I use a minibike for work and my engine makes a lot of crazy noises and has decreased performance exponentially
isn't the exhaust too close from the rubber belt ?
This thing inspired me big time. I just got a 459 mini bike put together and it's rad. Only thing is the torque converter seems super lazy on takeoff. The bike will not do a wheelie no matter how hard you try. I have a 40 series and I'm wondering if you got any tips to make it hook up harder. Seems like belt slip almost but I'm not sure. You mentioned a few times in this vid that your TC was holding it back but yours still hooks up way better than mine. What can I do?
I have the same bike but am going to squeeze all i can get out of the 196cc. And regearing for power not to much speed.
Garage legend🤙🏾
I was gonnq do a 420cc duro but im upping to the 500cc with a 40 seriese torque conveter rt200 frame
Need to dyno test a 420 and 301. Be awesome to see what they can do
I was just nonchalantly watchin your videos for my sons mini bike and see the primary school next to my mothers house i had no clue you were in that area i would love to have my sons bike worked on if your shop takes customers
Do you have a link for that rotating round table/base you have?
Hey Mr. red beard if you have the poly sticking out the right way,, you won’t have to worry about getting the spring, right I’m having problems taking off🏍️
hey Red could you do a build of a Subaru ex13? i have a hot one for my mini bike even though its a 5.0 and i wanna put a new bottom end and top in it for more comp with a metal plate welded across the top. I cant find parts though other than the carb...
great vid btw!
Awesome bike Greg👍
👏🏽💪🏽🔥
Yall sell these ready to ride ???
unfortunately we do not. Sometimes we sell projects when we are done.
How is it that you live in Tennessee and say,,OIL instead of OLL,,? 😂 love the video’s!
My 420 runs 80 just with a 308 and ported head🎉
does anyone know if they started making aftermarket parts for the 459 predator? Or does the 420 aftermarket fit it?
Sick!
Next... Extend that back axel . Stretch the beast 💯💯💯
Was this a 440 or 420cc?
Hello i have a mb 200 i would like for you to build it up and let me know
You guys should sell bolt on motor mount kits for this 👍
I need that kind of exhaust
Is it faster than the 224 gps bike yet?
AWESOME!! "Ghetto, Yes will it work?? Furr surrre" 😆✌️💚✊️🔥
On vw's and mostly all race engines they run zero lash. That will quite the valves down id run .007 or .005 on both valves
My rb200 w 420 is governed still and does 58mph. Try a 30 series driven and a 5990 belt.. I remove my gov ill be doing 70
With the 40 series driver
nice welds. seems to be less common on youtube these days
Please can you work on your buggies i would like to see it complete. Like the harley buggy
Wildcat 460cc next I hope!
yes sir. I will be getting one soon.
How much you want for it my friend
This is a cool ass build
You can name it "Hardly", the "Trail Hoss"....Seems like the Clydesdale of mini bikes.
Wow! That was awesome. Thanks for the word from the good book.
I wish these things were street legal in Massachusetts!
I need one as a trike!
That Donnie is a newbie isn’t he lol good to see him
Needs an extended swing arm kit would be much better/safer to ride!!✌️💚✊️🔥
Oo scratch that comment 😅lolol
Next upgrade take the jackshaft off and install a baker 6 speed for a Harley. I think you can get a hundred mph out of her.👍😂👍
I have a 5 speed Harley trans setting on the shelf!
We need more ghost 212 content!
I would like to see the rear live suspension mod put on this frame.
I love what you do but I like things that are dependable when I go riding I go far into the woods I can’t afford a break down. All those mods never hold up you can only ride in a parking lot to be safe.
That's not true. Maybe your mods don't hold up!
#brapp been a min but Dino still tuned in hanging in there y’all keep pushing @RBG y’all still my goats 🐐 I’ve learned so much from you simple!!! 💯🖤🦖🫡👀💨
Like to see a street legal trike build
Awesome
I was thinking it was knocking on video
I wish i knew ya im technically criple so i reverted to a grom glone scooter..it would love this engine 😢
Red beard brother man I have 0 mechanical knowledge so my question to you is if I was to pay you for your time if I was to send you my rt200 mini and a brand new 420cc engine with a tvc would you be willing to put it all together for me and send it back because I can't find anyone locally who's willing and I'd much rather have you do my bike because of your years of experience with mini's brother so please please please lmk if that's not asking to much from one of your long time subscribers and HUGE HUGE FANS???? BUT EITHER WAY KEEP THE GREAT CONTENT COMING OUT AND I'LL FOR CERTAIN KEEP WATCHING EM!!!! ALSO MUCH MUCH LOVE FROM NEW HAMPSHIRE BROTHER!!!!! GOD BLESS!!!!
I got those speeds on a 212 built tilly. 😂
As cool as it is, seems like it just isn't the bike for bulky 420.
A Hurricane on the other hand hint hint lol
Ya know EC makes a 460 lol.😅
Definitely heard a fart in there😂😂😂
420cc for win 🥇bro knows it great build boss it’s a hog 🐽💯🖤🦖💨🤘🏾
Dude I am so freaking far behind bc I have not seen your TH-cam channel in a bit bc I got a new phone so I lost all my channels
🚒👍
Show muito interessante essa moto 🛵 estamos juntos
i want one like that.
I’m not gone lie for 420cc it should be way faster I have a 224 cc predator goin 70+
Be careful who you let ride that one!
As long as you ride in your back yard mods make things weak
no need for a big block in these...the way you can get power from a 212 or 224 it's just not worth the weight.
How much does it take to make similar power with a 224?
I'd love to make $170 a day for doing real fun stuff all day
I love the Bible verses!
Great video.
I love the scriptures and witnessing you do in the name of Our Lord.
Great scripture!