Not even 10 seconds in and I'm yelling "Pugly's back!" and everybody else at the university library is looking at me like I'm nuts. Love your work guys, keep it coming!
Please use a reverse gear box. I would like to see one used. Me and my three year old son don’t miss a video. We are building a mini model T rat rod and enjoy all your videos. Thanks again guys!
Julio Garibay message me on Facebook I have messenger but not Facebook Choppin Rice I can send pics it’s been a well documented build first build with my son and it’s turning out pretty cool
take the cylinder and rod off the old engine, block off the cylinder hole with a plate, remount it between the clutch and axle and use it as a transmission...
It's nice that you're doing lower price projects. You are helping out a neglected group from other you tubers. Garage sales in the spring and fall are great sources of small engines. Sometimes someone might not be able to buy a new carb. Showing how to clean a carb and install a rebuild kit might help.
If you look in the background at 5:11 you can see that this is actually recorded before the truck cab is primed. Kinda funny. Nice job guys, keep up the good work!
for a great balance in gear ratio I recommend a 10 tooth on the torque converter to a 48 on axle. it gives a decent take off while not sacrificing a lot of top end.
I also change the 110cc engine to a 212cc predator. On my go kart. Mine is blue. Used a 30 series converter. 80 teeth sproket. Runs just fine. Even added a motocycle Bluetooth radio.
I bought my son the smaller version of that a few years ago and swapped the old 110 for a predator 212, added a torque converter and she runs great. It will do donuts like no other until the belts wear in.
You guys remind me of me and my cousin growing up. We were a "team" LOL. Many of our adventures centered around model cars/planes, plastic cement, M80s and gasoline. Enough said...let's see your "bloopers" LOL
I had a single seat kart like this (little yellow one) at the summer '18 mini mayhem and it was a beast on the trails at busco! John seemed upset that I didn't bring it for the fall meet lol
I know this video is old but those Subaru engines are absolute champs with the experience I’ve had with them even though I’ve only had two I have put them through hell and back and they just keep going!
I built a very sketchy cart from an old frame I found behind a barn once. Had a 3 horse Briggs, clutch, and super high gearing. It couldn't pull out of its own way but on straight stretches it would *literally fly* To the point I had to put disc brakes on it because the stock brakes couldn't even slow it down it was so fast.
I did this swap to my version of Chinese go kart, except I used a predator 212 and basically did a stage one set up to the engine paired up with a torque converter. The thing is pulls like u wouldn’t believe, I clocked it at about 45.
with the meet up, I 100% would have gone, hands down. However I simply got bogged down with work. I'm definitely going to attempt to go depending on when that will be. I'm sure I should have my ATV up and running by then
I took my governor off my tecumseh 6.0 and it worked good but since I had to rig a spring to the throttle so it will bounce back it was a little too strong. My dad didn’t realize and adjusted the throttle cable too much to where it broke.
Convert the 107 to a gearbox... Done it before. You take apart the top end. make a cover for the cylinder. remove the cover over the flywheel and the starter. Bolt a gear to the flywheel. bolt your new engine on a plate in front or above this new stand alone transmission with built in clutch and attach them with a chain... it works pretty good till it gives under the increased horsepower and torque.
Make the lighting system work again, the turn signals, 4 ways, tail/brake light, headlights, etc... You should also put one of those slow moving vehicle triangles on it to make it so it's "street legal" for the 'paper boy.'
your story about a 12 year old is literally exactly like my story about a year ago, except instead of a paperboy or mowing lawns I run a small engine repair service. I got a klipper kart and put a stage 1 predator with torque converter and it RIPS
You guys should do a build with a Briggs and Stratton 1450 I think that would be cool to see I am planning on putting one on my yerf dog 3203. I love watching your videos they have taught me a lot about go karts and how to maintain them.
How do you know what carburetor to get? And also how do you know what exhaust to get? Why did the clutch spark like that? How do you know what torque converter to get
That's awesome people brought welders and stuff so if anybody broke down they didn't have to stop having fun nor did they have to be sad cuz they broke their machine they fixed it right up then in there for free so they could ride all day that is completely awesome
If you guys set the next meet up for late spring, I just might be lucky enough to be able to go lol I'd be coming from Michigan so it'd be a bit of a trip, but I'd have to say it'd be worth it
thik having the intake right after the rearwheel is an invite to suck up all kinds of dirt and moisture might be better to buy a U bend piece of pipe and make the intake so the carb mount above the engine pointing the other way
its so funny to see Ike get in the cart and his knees almost to his chest, Those Subaru air cooled engines are darn near indestructible. Costco sells a pressure washer with a Subaru engine and has electric start, guys will use these for anywhere from 8 -12 hrs and just check fuel and oil let it cool for awhile. they have said really not bad on fuel at all. about a tank a day, 2.4 gallons, even my Honda powered one is no better than it. Looking forward to the next video in puggly AKA paper boy budget,LOL
You guys should partner \ collaborate with rather b welding. Not only are you both sponsored by Go Power Sports, but you both work out of small garages and manage to make some pretty cool stuff. Just my opinion. Keep up the awesome job!!!
I've seen a heavy 3 disk clutch set racing clutch, how would one of those work on it with a slight sprocket change. The belt. Drive is way out of reach for some what does a heavy duty clutch run. ???
you can get a MOLKT 26mm flat slide mikuni clone from amazon for $30 sometimes less. Yes they are good whether you think so or now I'm running one on my motorcycle and it is amazing and works great.
yeah, more subie's !......what is that sweet, long, bent intake you used...? my manco kart has a subaru robin ex17, (6.5hp, 169cc, I think) and I've been looking for intake/carb upgrades, and exhaust as well...found a lot of really cool internal/external race upgrades at Aussiesports, but overseas shipping makes it a bit pricey to get a full stage II type kit....
I'm also looking for an intake to use with a mikuni on an EX21 like this. I bought a dingo with an EX17 so it took the head and swapped it to the EX21 but want to run a bigger carb... Can't find an intake though. Anyone know where to find one?
@@jarrodthome The only performance parts I'found specifically for the ex17 thru ex21 Subaru Robins were from Aussiesports in Australia, as they have (had?) a class for racing them...They build full engine kits and sell a full array of parts for a "KX21", a is their racing kart engine...I have heard they get some internal parts from ARC in the US, but not sure if their intakes (they have several options for the subies) are...the aussie-to-US shipping has gone down quite considerably in the last couple years, so it might be doable now, as it had been ridiculous ...they do have it all though, from cool dress-up kits, to cranks, cams, n heads
I’m coming to the next meet! Just got a reliable vehicle to take my toys down there to play for the weekend! Can’t wait to meet y’all I’m coming from Rhode Island
That's the thing that's hard to get used too with electric vehicles. My ebike has a hub motor in the rear wheel, that gets me from standstill up to 60mph at a rediculous clip. From standstill it produces approx 180lb/ft of torque, but that's what it takes when all you have is one long gear and you still want to get to a reasonable top speed
At this point, I can't believe you guys even try using a normal clutch anymore. The torque converters just work so much better and make driving the thing a lot better experience overall.
What carb would you guys recommend for a slightly smaller b&s version of the 670? The carb has worn out and I can’t find anything on what the engine series is. Gonna make a go kart. It’s an I/C intek Briggs 18 horse from at least 1983. Keep up the good work! Hope to see the mower back in action!
Corbin Boltz I cant buy a carb kit; I have no clue as to the engine serial, and it says nothing about it on the block. Also, I have a very basic idea on the price of mower carbs from that time. $130. Vs, what, $80 on top of cc10 if it’s from gps.
Guys channel (( (build, break ,repeat)) they just put ah TURBO on there GO POWER sports motor /GO KART ..there young guys and awesome as frig.. same as this channel but never ever OLD and say STAY OFF the GRASS .hahahaha ol ass dude HAHA LOL I still love this channel Mon an Wed...👍
iv got a Bulldog bd300 made by Home Depot with a 9.5hp Subaru motor so if I change out the carb to a 24mm will that be good enough? will that make it better and faster?
I would still really like to see a proper sequential gear atv engine in one of those off road mini buggies! No Ducati engine, but something like a yamaha or honda 300cc. That would become your off road standard for comparison against all else.
It's allliiivvveee lol. Man that thing is slow to take off but yea that is definitely a high speed pass gear. Need to use the 4wheeler to push it to help get it up to seed faster like they do with the salt flats land speed record cars
I have a go-cart and it keeps going through belts. I am going to change to chain. What is the best clutch that I could get that is not a lot of money. For my Predator 212 CC engine
SOB! The C-10 is like Christine. It has returned it's self to semi orange again! ; P Great video guys! This is exactly what i am considering for my 13 yr old this year... Thanks guys! : )
Hey Ike, as a bachelor, I think you should be aware of "Downy Wrinkle Reducer". It comes in a spray bottle so you spritz your shirt, tug at it a little, shake and adorn a wrinkle free shirt! ;)
Too bad Subaru discontinued their manufacture of small industrial engines. To me they are every bit as good as Honda engines. I have a generator and a pressure washer powered by Subaru and they always start right up after sitting for several months. Besides the gearing issues you already noted I would suggest you remove the governor, and also that you get the air cleaner out of the path of any mud and water from the rear right tire maybe by fitting it a 90 degree bend and raising up several inches, maybe with a neopreme rubber elbow from the plumbing section of your local hardware store. Pugly vs Yerf Dog would be a fun video. I think you should rename Pugly "Fugly" or better yet "Fugly Pugly".
Why don't you guys get some 4 speed transmissions from old riding mowers and play with Go carts that can shift? No manual clutch needed, just use a centrifugal and let off the gas to slacken the drive chain(s). That would be cool.
That was a cool swap in all, but i'd just like to see a 670 built up and put in Pugsly.. Maybe a wider axle, better front, & widen the frame about 6-8in. at the cokpit area. Now this i would really like to watch u fellas build... ;) ..Keep rubber side dwn,..
Had I have known about the meet I would have shown up. Its all good, ill get the next one in the spring with the kids. Getting them all karts for Christmas and am gonna rebuild them with them. May even make some videos of it.
I have a similar Subaru 211cc engine and I run a 16 tooth clutch with between 74 and 81 tooth sprocket. Me and the kart together weigh about 148kg. With a 73 it'll go 60mph
Hello cars and cameras I was wondering if there is a way or a place that you know that sells that custom manifold intake for my Subaru engine? Pls reply
If we cut a bunch of weight out of this kart and had a long, flat road to test it on, it would probably do 60 miles an hour with this gearing setup!
Ike needs an iron...rip van wrinkl
e lol. Great job gentleman
How does ike grow his facial hair so quickly 🤔 anyone else notice ?
Let Her fly man... Let Her fly...
Can i have the pugly engine
Put the torque converter on it! \(^_^)/
Not even 10 seconds in and I'm yelling "Pugly's back!" and everybody else at the university library is looking at me like I'm nuts. Love your work guys, keep it coming!
Hahahaha
Please use a reverse gear box. I would like to see one used. Me and my three year old son don’t miss a video. We are building a mini model T rat rod and enjoy all your videos. Thanks again guys!
That's the coolest thing I've heard all day. Good job dad.
That’s awesome that’s exactly what I was gonna do when I have kids
Where can I see pictures of that build?? I'm very Interested in it
Julio Garibay message me on Facebook I have messenger but not Facebook Choppin Rice I can send pics it’s been a well documented build first build with my son and it’s turning out pretty cool
@@juliogaribay5331 me too...
take the cylinder and rod off the old engine, block off the cylinder hole with a plate, remount it between the clutch and axle and use it as a transmission...
You'd have to balance the crankshaft. Good thought tho
@@ironhorseranchhorsetrainin Theyre balanced from the factory, If they werent it would toast crank bearings.
i did one on a mud mower a couple years ago..still works just fine..jus sayin
@@ironhorseranchhorsetrainin
@@ironhorseranchhorsetrainin rather be welding did it and didn't have to
@@mattcyr3342 that's with the piston and rod still attached. With the piston and rod off, it would be out of balance
It's nice that you're doing lower price projects. You are helping out a neglected group from other you tubers. Garage sales in the spring and fall are great sources of small engines. Sometimes someone might not be able to buy a new carb. Showing how to clean a carb and install a rebuild kit might help.
I agree but they have some videos of carb work and the functions and how they work.
You guys should definitely put a forward, neutral, reverse gearbox on some of those offroad go karts
This is so sick! We want to try this out when we get a tube bender !
2:53 I love the little ad you guys threw in for yourself almost made me buy a carb for a engine I don't even have😂😂
If you look in the background at 5:11 you can see that this is actually recorded before the truck cab is primed. Kinda funny. Nice job guys, keep up the good work!
thought i was trippin
My 14 hp Subaru is a beast and always starts first pull. Great motors.
I like your cat and I really like the free/new engine on pugly
You guys have helped me sooooo much over last summer and this winter on my projects
Thank you for what y’all do
"treat it like a 12y/o with a paper route and no money" is how every carsandcameras build goes! LOL good stuff keep em coming.
for a great balance in gear ratio I recommend a 10 tooth on the torque converter to a 48 on axle. it gives a decent take off while not sacrificing a lot of top end.
I also change the 110cc engine to a 212cc predator. On my go kart. Mine is blue. Used a 30 series converter. 80 teeth sproket. Runs just fine. Even added a motocycle Bluetooth radio.
I bought my son the smaller version of that a few years ago and swapped the old 110 for a predator 212, added a torque converter and she runs great. It will do donuts like no other until the belts wear in.
Who else watches these guy on their lunch break?
That's funny because I do.
That’s funny because it’s the summer for me
Masterchief Gaming lol he talking bout at work not school
Ha ha I don’t even have a summer break I live in Australia
I do montages with their vids lol like watching them
3rd
Isaac it'll be fine this is great😂😂
5th
No one cares
@@tywilliamson2472 an nobody cares about what you say
Ur very funny my friend 😋
The answer to fuel problems isn't always.. "replace the carb". Most of the time the answer is learn to clean and adjust/jet it properly.
True
amen dude
Since it has a Suby motor, make it like a Suby, a nice motorcycle exhaust, cool designs, etc...
You guys remind me of me and my cousin growing up. We were a "team" LOL. Many of our adventures centered around model cars/planes, plastic cement, M80s and gasoline. Enough said...let's see your "bloopers" LOL
Subaru engine yes finally! I have one on my go-kart I want to see more builds with them maybe some mods too.
I had a single seat kart like this (little yellow one) at the summer '18 mini mayhem and it was a beast on the trails at busco!
John seemed upset that I didn't bring it for the fall meet lol
I know this video is old but those Subaru engines are absolute champs with the experience I’ve had with them even though I’ve only had two I have put them through hell and back and they just keep going!
Thanks for bringing Pugly back!!! Looking forward to the next upgrade
I want to see this little monster with better gearing. Awesome video guys!
I built a very sketchy cart from an old frame I found behind a barn once. Had a 3 horse Briggs, clutch, and super high gearing. It couldn't pull out of its own way but on straight stretches it would *literally fly* To the point I had to put disc brakes on it because the stock brakes couldn't even slow it down it was so fast.
I did this swap to my version of Chinese go kart, except I used a predator 212 and basically did a stage one set up to the engine paired up with a torque converter. The thing is pulls like u wouldn’t believe, I clocked it at about 45.
with the meet up, I 100% would have gone, hands down. However I simply got bogged down with work. I'm definitely going to attempt to go depending on when that will be. I'm sure I should have my ATV up and running by then
I took my governor off my tecumseh 6.0 and it worked good but since I had to rig a spring to the throttle so it will bounce back it was a little too strong. My dad didn’t realize and adjusted the throttle cable too much to where it broke.
Convert the 107 to a gearbox... Done it before. You take apart the top end. make a cover for the cylinder. remove the cover over the flywheel and the starter. Bolt a gear to the flywheel. bolt your new engine on a plate in front or above this new stand alone transmission with built in clutch and attach them with a chain... it works pretty good till it gives under the increased horsepower and torque.
Hard to believe it fired on the first pull! 👍 😊 I can't believe the good deals you fellas find and thanks for the review!
That mounting plate's amazing, grabbing two soon.
Make the lighting system work again, the turn signals, 4 ways, tail/brake light, headlights, etc... You should also put one of those slow moving vehicle triangles on it to make it so it's "street legal" for the 'paper boy.'
Aiden Cox W
your story about a 12 year old is literally exactly like my story about a year ago, except instead of a paperboy or mowing lawns I run a small engine repair service. I got a klipper kart and put a stage 1 predator with torque converter and it RIPS
``Need a push start?´´
*Isaac* `` nah it'll be allright´´
*sparks from the clutch*
You guys should do a build with a Briggs and Stratton 1450 I think that would be cool to see I am planning on putting one on my yerf dog 3203. I love watching your videos they have taught me a lot about go karts and how to maintain them.
How do you know what carburetor to get? And also how do you know what exhaust to get? Why did the clutch spark like that? How do you know what torque converter to get
Omg pugly is back!! Yesssss!
Yup! Gearing is a bugger for sure, had the same issue on mine! Good video guys
I love Subaru’s I’ve got a 2000 fox go kart with a 6.5 Subaru and it starts first pull every time
John is mentioning the first pull start bc he wishes his miata started that good lol love ya guys
That's awesome people brought welders and stuff so if anybody broke down they didn't have to stop having fun nor did they have to be sad cuz they broke their machine they fixed it right up then in there for free so they could ride all day that is completely awesome
Good to see pugly back
Hate I missed you guys at Busco, we go a lot in the summer. Hope to make the next one. Great video here too.
Everytime y'all start welding I squint and look away...lol
If you guys set the next meet up for late spring, I just might be lucky enough to be able to go lol I'd be coming from Michigan so it'd be a bit of a trip, but I'd have to say it'd be worth it
Robin engines are the best for anything and everything, period.
thik having the intake right after the rearwheel is an invite to suck up all kinds of dirt and moisture
might be better to buy a U bend piece of pipe and make the intake so the carb mount above the engine pointing the other way
its so funny to see Ike get in the cart and his knees almost to his chest, Those Subaru air cooled engines are darn near indestructible. Costco sells a pressure washer with a Subaru engine and has electric start, guys will use these for anywhere from 8 -12 hrs and just check fuel and oil let it cool for awhile. they have said really not bad on fuel at all. about a tank a day, 2.4 gallons, even my Honda powered one is no better than it.
Looking forward to the next video in puggly AKA paper boy budget,LOL
Man I've Been missing out... glad to be back
Glad to see pugly back in the game.
You guys should partner \ collaborate with rather b welding. Not only are you both sponsored by Go Power Sports, but you both work out of small garages and manage to make some pretty cool stuff. Just my opinion. Keep up the awesome job!!!
I love this channel. My girl thinks I’m weird cause I’m 31 and want to build a go kart. What does she know. 😎
I'm 44 and bored with 4wheelers and dirt bikes. These guys are giving me ideas....
My wife would tell me to go buy some steel
Im 14 and im modding a weird buggy kart lol
you break up with that fun killing twat yet?
I'll be 70 in January and I'm building a go-kart. It doesn't matter how old you are, fun is timeless. 😁
I've seen a heavy 3 disk clutch set racing clutch, how would one of those work on it with a slight sprocket change. The belt. Drive is way out of reach for some what does a heavy duty clutch run. ???
Is there a way to figure what dates your videos were uploaded? Right now I'm trying to watch them in order and it's just hit and miss.
you can get a MOLKT 26mm flat slide mikuni clone from amazon for $30 sometimes less. Yes they are good whether you think so or now I'm running one on my motorcycle and it is amazing and works great.
Definitely my favorite channel
Hey!! I got recognized as a top fan of carsandcameras on facebook today! Woohoo!
Can't wait to see it ripping😎
John, is the one blue glove, one black glove a given for success to get a motor out without pulling the go-kart apart or spilling oil?
yeah, more subie's !......what is that sweet, long, bent intake you used...? my manco kart has a subaru robin ex17, (6.5hp, 169cc, I think) and I've been looking for intake/carb upgrades, and exhaust as well...found a lot of really cool internal/external race upgrades at Aussiesports, but overseas shipping makes it a bit pricey to get a full stage II type kit....
I'm also looking for an intake to use with a mikuni on an EX21 like this. I bought a dingo with an EX17 so it took the head and swapped it to the EX21 but want to run a bigger carb... Can't find an intake though. Anyone know where to find one?
@@jarrodthome The only performance parts I'found specifically for the ex17 thru ex21 Subaru Robins were from Aussiesports in Australia, as they have (had?) a class for racing them...They build full engine kits and sell a full array of parts for a "KX21", a is their racing kart engine...I have heard they get some internal parts from ARC in the US, but not sure if their intakes (they have several options for the subies) are...the aussie-to-US shipping has gone down quite considerably in the last couple years, so it might be doable now, as it had been ridiculous ...they do have it all though, from cool dress-up kits, to cranks, cams, n heads
The intake was on there allready. It looks homemade
@@isaacitllbefine7231 bummer, I guess it comes down to Aussiesports or fab......thanks, though
@@isaacitllbefine7231 Thanks man- looks like fab it is. That's more American anyways :)
Cool swap boys, my current build is a Murray Explorer with a 400cc Honda 2 speed engine, custom rear swing arm and front suspension✌✌✌
Thanks for "sparkingly"! Today is now a success because I've learned a new word :D
At school but enjoying cars and cameras
Same here lmao
I really enjoy watching your vids, just wondering if Ike has ever seen an iron or even knows how to use one. Haha lol.
Whats a iron?
@@isaacitllbefine7231 It keeps your shirt crease free, you know Iron.
I’m coming to the next meet! Just got a reliable vehicle to take my toys down there to play for the weekend! Can’t wait to meet y’all I’m coming from Rhode Island
That's the thing that's hard to get used too with electric vehicles. My ebike has a hub motor in the rear wheel, that gets me from standstill up to 60mph at a rediculous clip. From standstill it produces approx 180lb/ft of torque, but that's what it takes when all you have is one long gear and you still want to get to a reasonable top speed
Also, yes, that's an absurd amount of torque for a downhill mountain bike. If you try to put all that down from standstill, you'll just loop it.
At this point, I can't believe you guys even try using a normal clutch anymore. The torque converters just work so much better and make driving the thing a lot better experience overall.
What carb would you guys recommend for a slightly smaller b&s version of the 670? The carb has worn out and I can’t find anything on what the engine series is. Gonna make a go kart. It’s an I/C intek Briggs 18 horse from at least 1983. Keep up the good work! Hope to see the mower back in action!
A new b&s one theyre cheap!!! Like 30$ for the whole kit of gaskets and carb type of cheap ive had to buy one myself
Corbin Boltz I cant buy a carb kit; I have no clue as to the engine serial, and it says nothing about it on the block. Also, I have a very basic idea on the price of mower carbs from that time. $130. Vs, what, $80 on top of cc10 if it’s from gps.
That needs a 250 yz motor watercooled lol great video as always
Guys channel (( (build, break ,repeat)) they just put ah TURBO on there GO POWER sports motor /GO KART ..there young guys and awesome as frig.. same as this channel but never ever OLD and say STAY OFF the GRASS
.hahahaha ol ass dude HAHA LOL I still love this channel Mon an Wed...👍
iv got a Bulldog bd300 made by Home Depot with a 9.5hp Subaru motor so if I change out the carb to a 24mm will that be good enough? will that make it better and faster?
I did the same thing but no welder or grinder so it is still sitting in my garage but I'm working on it and it is a race ish kart
nice it sounds like a set of drums when it's just setting there running that's awesome 👍👍👍👍
I have one question where do you guys find these karts I cant find one like that for less then 500 bucks
Just keep a eye out and be patient
I would still really like to see a proper sequential gear atv engine in one of those off road mini buggies! No Ducati engine, but something like a yamaha or honda 300cc. That would become your off road standard for comparison against all else.
I have this same engine on my minibike. Im lookimg into a stage 1 kit but im not sure if theyre the same thing as predator 212s it looks like itll fit
Did you keep the reverse on it. Have you found a reverse for a 420 yet.
You guys are crazy.... thats why I love this channel LOL
I love your guy's videos!
It's allliiivvveee lol. Man that thing is slow to take off but yea that is definitely a high speed pass gear. Need to use the 4wheeler to push it to help get it up to seed faster like they do with the salt flats land speed record cars
Would an adjustable back pressure exhaust (i.e. Supertrapp, or similar) work for this particular machine, to give it greater low end torque?
nice video idea! I'm 30 and I can barely afford a budget build. too many hobbies.
I know the feelin bro,..
I have a go-cart and it keeps going through belts. I am going to change to chain. What is the best clutch that I could get that is not a lot of money. For my Predator 212 CC engine
SOB! The C-10 is like Christine. It has returned it's self to semi orange again! ; P
Great video guys! This is exactly what i am considering for my 13 yr old this year... Thanks guys! : )
Hey Ike, as a bachelor, I think you should be aware of "Downy Wrinkle Reducer". It comes in a spray bottle so you spritz your shirt, tug at it a little, shake and adorn a wrinkle free shirt! ;)
Too bad Subaru discontinued their manufacture of small industrial engines. To me they are every bit as good as Honda engines. I have a generator and a pressure washer powered by Subaru and they always start right up after sitting for several months. Besides the gearing issues you already noted I would suggest you remove the governor, and also that you get the air cleaner out of the path of any mud and water from the rear right tire maybe by fitting it a 90 degree bend and raising up several inches, maybe with a neopreme rubber elbow from the plumbing section of your local hardware store. Pugly vs Yerf Dog would be a fun video. I think you should rename Pugly "Fugly" or better yet "Fugly Pugly".
Pugley returns!
> Paperboy budget
> Brand new Mikuni carb from GoPowersports
I lol'd.
I like ya videos! But why those tiny engines all the time? Exept for the Ducati 900cc of cause
I have a 9 1/2 hp Subaru. Runs great
Why don't you guys get some 4 speed transmissions from old riding mowers and play with Go carts that can shift? No manual clutch needed, just use a centrifugal and let off the gas to slacken the drive chain(s). That would be cool.
they did.
Happy week gentlemen
That was a cool swap in all, but i'd just like to see a 670 built up and put in Pugsly..
Maybe a wider axle, better front, & widen the frame about 6-8in. at the cokpit area.
Now this i would really like to watch u fellas build... ;) ..Keep rubber side dwn,..
Had I have known about the meet I would have shown up. Its all good, ill get the next one in the spring with the kids. Getting them all karts for Christmas and am gonna rebuild them with them. May even make some videos of it.
I would watch if you did
I have a Subaru engine on my pressure washer. Second pump. Loves gas, but strong engine.
I have a similar Subaru 211cc engine and I run a 16 tooth clutch with between 74 and 81 tooth sprocket. Me and the kart together weigh about 148kg. With a 73 it'll go 60mph
That’s what makes a Subaru
A Subaru
Hello cars and cameras I was wondering if there is a way or a place that you know that sells that custom manifold intake for my Subaru engine? Pls reply