please dont ever stop making videos explaining stuff like u do.. and please do not delete your videos either because i use them as reference guides.. thank you for your attention to detail and for sharing it so humbly
My lma's started getting a bit noisy on my b16a2, I have never even removed a valve cover, but your video made it seem like a fairly simple job that even I could manage by myself, kudos!
I really like the product i got. i did some research on one of the forums, Honda tech i believe, and there were a few complaints with the skunk2 ones. Not to say that all of them are bad, but i didnt want to take a chance and have to redo all this work again. i cant remember how much they were, but i got them right before Christmas so there was some sort of sale going on . I want to say they were the same price as the skunk2s.
Awesome video man, I'm a Honda enthusiast as well as a automotive technitian. Your videos are on point every time bro. I have a 96 accord I'm restoring little by little. And every time I get bored with it or discouraged about spending money on it I watch your videos and the Honda love comes right back. Don't ever stop making your videos. Where do I go to get a t shirt? I want to help support your channel.
Dude thanks alot for this video!! It helped me and i learned a lot from you!! Thanks again lol Any videos of springs retainers valves uninstall/install! For these motors im debating if i should do em or not!
Cool video. Made a b20vtec a couple months back. Your videos helped a lot. Mine makes a clacking noise near the injectors but inside the head, I think this might be it. One thing though, the ground cable is in the wrong spot.
I have the b16a on the stand next to the 12.7:1 forged built bottom n top end b16a3, both are motors for my eh2 cx hatchback from 1993' canadian model haha but I also have a ej8 with a stroked an .15 over d16y8 that's pretty fun an fast haha
Great video. but I must be blind.. is the lifter under the lost motion spring? I can't tell which one u take off first..i seee u pull out the lifter but wheres the dam stock lost motion spring lol
Great video! I was wondering about when you zip tied the cam gear to the timing belt, but then the cam shafts you took out and the belt was still sitting there?
I know it's an old comment but... Alot of people loosen the valves when disassembling and reassembling and then re adjust clearances to make it easier on the cams and have an easier time reseating the cam caps. it seems like they didn't bother doing that here. However any time i do this type of work i always go through the valves with my feeler gauges and re check the clearances to adjust if needed.
i recently just did this and replaced my camshaft seals, and did water pump, timing belt and tensioner.. my issue is im now having my belt walk inwards towards the block.. 97 gsr integra, i made sure the cam sprocket is fine, and the shim is also on the crank.. any advice pleaseee before i rip out this motor and have a shop over charge me!!!
I learned alot from this video! curious I have a b16a that's been having a loss of power and iv been hearing the marble effect lately, kinda just started. would bad lma cause power loss?
HELP! After installing LMA is a valve adjustment needed?? My car isn't starting, when trying to start it I get a loud back fire! ...checked the timing like 5 times. Not sure what to do
I tried everything it doesn’t even turn on if u manually turn it on I have oil pressure the solenoid works so idk what it is I just took the head back up because some one told be about a pin or something small like in the block it was there now someone says my lma could be bad please help !!!!!!!!!!!!!!!!!!!!!!!!!!
I need to change those lma But I would be replacing the OEM because there is no version of skunk2 in our country Is it quieter? Does it have any effect on power?
Dumb question, but do only vtec engines have Lost Motion Assembly's? Thanks for another awesome vid, and I feel you on the heat, been pretty bad here in GA too.
Hey, gotta question man, my b16a timing belt broke, I timed the motor, tdc, Since that happened I changed my lmas, so I had my cams out, went to install my cams and my crank moved and my cams don't seem to want to sit right, like they turn a little not with the arrow up and sit nice, but when I turn the cams to sit tdc they don't sit good. Is that ok just put the cam caps on it like that as long as the crank is tdc and cams are pointing up. Can you help me any.
Asking a ?? Are you familiar with the 2007 and 08 civic engines ? Do you feel better with the 90s and 2000 motors cars? Sr Do a video of a civic Lx 2007-2009 It will be for me I own a 2008 Lx civic sedan
Hey brother I’ve been having a lot pf problems with my harness an I have a jdm b16a engine by any chance in the world do you know where I can get a wiring harness please get back to me it would mean a lot thank you so much
Lucky Rooster mine has cooling issues as well and it makes no sense because we rebuilt the head put a new waterpump on a new thermostat and a newer radiator but the fan sensors don't work so I have it wired to a switch but somehow it still likes to get hot
jah jay under the hood fusebox is easy you just unbolt it then unplug it and it comes right out I think it's e or 4 10mm bolts ,the two Phillips head screws for the battery terminals and then pull it up and you have to take a flat head and pull a plastic cover off of the bottom to expose the plugs
HELP! I have a b20v Car won't start...getting a SERIOUS backfire while cranking it....checked the timing.. checked the valves.....don't know what to do!
Don’t buy or use skunk 2 lma’s!!! They are juuunkkk!!! Stock lma’s maintain a stronger spring pressure. This guys going to learn the hard way once he scuffs up and ruins his rocker assembly 👎🏼
please dont ever stop making videos explaining stuff like u do.. and please do not delete your videos either because i use them as reference guides.. thank you for your attention to detail and for sharing it so humbly
Great upgrade, I love the LMA's that Skunk2 make! Might scoop up some of these soon for my build!
You just made my life 50x easier showing me that timing technique haha
My lma's started getting a bit noisy on my b16a2, I have never even removed a valve cover, but your video made it seem like a fairly simple job that even I could manage by myself, kudos!
Man i could have used this when i did this on my db8 over the winter. Excellent work. I went with science of speed's kit instead of the skunk2s.
danteisme More expensive or less? Better quality, worse or similar? what are your thoughts on the kit you got?
I really like the product i got. i did some research on one of the forums, Honda tech i believe, and there were a few complaints with the skunk2 ones. Not to say that all of them are bad, but i didnt want to take a chance and have to redo all this work again. i cant remember how much they were, but i got them right before Christmas so there was some sort of sale going on . I want to say they were the same price as the skunk2s.
danteisme thanks for the feedback, much appreciated!
Awesome video man, I'm a Honda enthusiast as well as a automotive technitian. Your videos are on point every time bro. I have a 96 accord I'm restoring little by little. And every time I get bored with it or discouraged about spending money on it I watch your videos and the Honda love comes right back. Don't ever stop making your videos. Where do I go to get a t shirt? I want to help support your channel.
good video mark. one tip, you can use a 17mm bolt from the transmission to remove the rail. threads right in.
I don't even have a honda but subd just for the knowledge, cheers keep on keeping on
I love this channel. Learn something new every time
great vid...simple,and straight to the point.
Wish you had a video of before vs after but these videos are awesome super educational.
Superb. This video gave me the confidence to do this today.
Good work. Timing the motor is something I never liked doing
"Wiggle the shaft back in" has "that's what she said" all over it. LMAO Thank you great sir for the video.
Thank you for your help 💪💪 greetings from Puerto Rico 😀
Tempted to do this now, hmm
LATOMMYLA If you like spirited driving, or have any upgraded internals do it. 100% necessity.
Might as well upgrade cams, valve springs and retainers while it's open lol. Might even be a good time to port and polish
Driveway-built cafe the car while the engine is out and rip the interior out because daily, also add stickers for added hp
Cage*
Dude thanks alot for this video!! It helped me and i learned a lot from you!! Thanks again lol Any videos of springs retainers valves uninstall/install! For these motors im debating if i should do em or not!
Cool video. Made a b20vtec a couple months back. Your videos helped a lot. Mine makes a clacking noise near the injectors but inside the head, I think this might be it.
One thing though, the ground cable is in the wrong spot.
I got a jdm b16A and a fully built b16a3 , diggin this video!
Matthew wallin sweet what are they in ive got a second gen jdm b16a out of a 96 ek4 in a 99 dx coupe
I have the b16a on the stand next to the 12.7:1 forged built bottom n top end b16a3, both are motors for my eh2 cx hatchback from 1993' canadian model haha but I also have a ej8 with a stroked an .15 over d16y8 that's pretty fun an fast haha
It was actually Honda that came up with the updated LMAs not skunk
Great video as always! 👍🏼
if u can make a video on how to do an h22 swap in a ek or eg or integra and if u guys can that would be grate
Google
can you make a video on powerwashing a Honda engine bay?
+Frederick Young sure why not !
Honda Street Garage subtítulos en spanish
yeah im scared to do mine. I have a 2000 em1 and i want to clean my bay up but too pussy to do it. lol
Jorge is asking for subtitles in spanish
Lucky Rooster I was literally just listening to she's so nice
I think he says he almost out of batterie when he wants to get a job done fast.. lol 😂
love this build.
Great video. but I must be blind.. is the lifter under the lost motion spring? I can't tell which one u take off first..i seee u pull out the lifter but wheres the dam stock lost motion spring lol
Great video! I was wondering about when you zip tied the cam gear to the timing belt, but then the cam shafts you took out and the belt was still sitting there?
Keep up the good work man!
RIP 👂 drums from that intro......
holly fuck impact on the spark plus
love this video..... very helpful as i am rebuilding my d16z6
Excellent video greetings from argentina.
nice honda!
Sup brother nice vid. I just ordered a shirt keep Honda alive keep gunning keep pushing
cruz auto repair Ordered one also! cool looking shirt!
You don't adjust the valve clearance?
I know it's an old comment but... Alot of people loosen the valves when disassembling and reassembling and then re adjust clearances to make it easier on the cams and have an easier time reseating the cam caps. it seems like they didn't bother doing that here. However any time i do this type of work i always go through the valves with my feeler gauges and re check the clearances to adjust if needed.
Great vidz broski!!!
i recently just did this and replaced my camshaft seals, and did water pump, timing belt and tensioner.. my issue is im now having my belt walk inwards towards the block.. 97 gsr integra, i made sure the cam sprocket is fine, and the shim is also on the crank.. any advice pleaseee before i rip out this motor and have a shop over charge me!!!
So if you do vtec locking pins you get rid of the motion springs 🤔
so does vtec engage more crazyly? need to do a vid on a pull off it 🙌
ill give this video an 8/10 would of been 10/10 had you done a before after on how the engine sounded.
great video man
Hey Thanks for sharing. How often should we change the motion assembly on a b18c1? thanks
HSG!
What’s the purpose changing the lma’s is that gave you a lil more power?
What if they do get mix up how do put them back together ? You should make a video how too thanks in advance
Way cool friend!
What are those called ...that u are putting in and do skunk2 make some for single cams
About how much are those skunk 2 parts you just installed
Dang makes me want to change mine out. By any chance would this make a diff on vtec sound?
I learned alot from this video! curious I have a b16a that's been having a loss of power and iv been hearing the marble effect lately, kinda just started.
would bad lma cause power loss?
i heard unbrareably hot. boy its 125 here in az im jealous of upper 90s
+Steps sheeeet!!! We have 90% humidity here too! Lol I'll take the dry 125! Lol
i wish it was dry atm its humid as fuck with the monsoon
HELP! After installing LMA is a valve adjustment needed?? My car isn't starting, when trying to start it I get a loud back fire! ...checked the timing like 5 times. Not sure what to do
great vid and do you know if the b series lma are the same size as the h series lma a few ppl told me it's the same but I can't find anything online
Do they not make these kits for H series? All I can find is B series kits with no indication if they also work for H22A
are you supposed to notice any performance changes by replacing these?
Thanks man
Great vid! What song is that at the end? Sounds smooth
I tried everything it doesn’t even turn on if u manually turn it on I have oil pressure the solenoid works so idk what it is I just took the head back up because some one told be about a pin or something small like in the block it was there now someone says my lma could be bad please help !!!!!!!!!!!!!!!!!!!!!!!!!!
How to make so good horse power out a h22a engine
U didn't adjust valve?
I need to change those lma
But I would be replacing the OEM because there is no version of skunk2 in our country
Is it quieter?
Does it have any effect on power?
What's the size of the Allen plugs on the head?
I used these in my build are they still quite after use?
eyebrows on fleek!
what symptoms appear when you need to replace these? or is it a just-do-it-to-do-it mod?
+Dc2 noise.... the factory ones get noisy over time
Hey whats the song at 0.45? And again later, something you made?
b16a
About how much was that sunk 2 parts
How much is the cost for replace lm?$thnks
Dumb question, but do only vtec engines have Lost Motion Assembly's? Thanks for another awesome vid, and I feel you on the heat, been pretty bad here in GA too.
yup
Hey, gotta question man, my b16a timing belt broke, I timed the motor, tdc, Since that happened I changed my lmas, so I had my cams out, went to install my cams and my crank moved and my cams don't seem to want to sit right, like they turn a little not with the arrow up and sit nice, but when I turn the cams to sit tdc they don't sit good. Is that ok just put the cam caps on it like that as long as the crank is tdc and cams are pointing up. Can you help me any.
what's the purpose of the part he installed... they look completely different than wat he removed??? i wldve thought i have the wrong part lol
Could the lma stop my vtec from coming on
What state are you guys from?
Do you need the front lower torque or motor mounts b series eg? Not using a/c
Lucky Rooster they don't fit d series mounts are longer on the transmission side and I don't think they line up on the a.c. bracket
But are they needed? I see so many b series swaps not using them
Asking a ?? Are you familiar with the 2007 and 08 civic engines ? Do you feel better with the 90s and 2000 motors cars? Sr Do a video of a civic Lx 2007-2009 It will be for me I own a 2008 Lx civic sedan
Hey brother I’ve been having a lot pf problems with my harness an I have a jdm b16a engine by any chance in the world do you know where I can get a wiring harness please get back to me it would mean a lot thank you so much
Guillermo sanchez cj. Harness on Facebook makes them new
Sorry but... what is LMA? Thanks
Jota García Lost Motion Assembly
For what is Jon? Thanks¡¡¡
My d15b is pissing me off right now...
Lucky Rooster mine has cooling issues as well and it makes no sense because we rebuilt the head put a new waterpump on a new thermostat and a newer radiator but the fan sensors don't work so I have it wired to a switch but somehow it still likes to get hot
Jake Nothanks everyone swears up and Down it's a great motor. I'll swap my y8 back in tired of the headaches.
Does anyone know what specs do I adjust me valves to on a b18c1 gsr with 98 spec itr cams?
0.07 to 0.09 intake
0.09 to 0.11 exhaust
do you have an email really needing some advice for my 96 EK sedan B18C swap
I have to do the same to my b16
the name of the song por favor
suh dude
Nice mod
need a video for replacement of a fuse box for EG..... also need link to full version of outtro
jah jay under the hood fusebox is easy you just unbolt it then unplug it and it comes right out I think it's e or 4 10mm bolts ,the two Phillips head screws for the battery terminals and then pull it up and you have to take a flat head and pull a plastic cover off of the bottom to expose the plugs
Hi
HELP! I have a b20v Car won't start...getting a SERIOUS backfire while cranking it....checked the timing.. checked the valves.....don't know what to do!
Spark plugs in wrong order , I had the same issue with my b20 swap , cranked but blew a major back fire after a couple seconds
Take it to a 👨🔧
yoooooooooooooooo
Mark plz I send u a pm on fb need ur help plz
Dirty lens is dirty.
$2000
Don’t buy or use skunk 2 lma’s!!! They are juuunkkk!!! Stock lma’s maintain a stronger spring pressure. This guys going to learn the hard way once he scuffs up and ruins his rocker assembly 👎🏼
that wasn't a good idea to point into the motor with a water bottle
terrell0481 it's just water.