Low on funds and my younger sister really wants a PC to play games with her friends I currently have one but don't let people use it that often because it's so expensive this case would be amazing to help build her first ever PC also love ur content really good stuff keep up the good work man
For a while now I've been wanting to make my first pc, and I ordered all the parts to do so 3 days ago. Everything has come so far except for the 120mm fans and case. They got delayed and were supposed to come yesterday but did not so I got a full refund for both and no case or fans. I had picked a micro atx motherboard for the build and I was looking for a case to fit it. I actually found this same case on amazon and looked up a review for the case on youtube and I stumbled upon this video and saw there was a giveaway. Anyway, that is what I would use the case for. Great review by the way!
Just rebuilt my system into this case to accommodate a 240mm AIO for my 3080 (EVGA Hybrid kit) and it's fantastic. Upgraded the front fans and used a 120mm rad for the Ryzen 7 (downgraded from a 240mm in my older case) and even the CPU temps dropped. Runs cool as a cucumber and looks great
Okay so I’m not sure if I understood or not, but the fans RGB can be controlled either through the motherboard with software or with the reset switch. What about the fan speed? Is it stuck at a constant speed like how older montech cases used a molex plug? Or can you control the fan curves?
Nice I was stuck between this and the Vetroo M01 Micro-ATX a few weeks ago, I ended up with the Vetroo (Aerocool Atomic clone, and I really like it). Couldn't really find much on this one, looks like a legit budget airflow conternder!
I agree case manufacturers need give an option without fans. Not many brands do it. Also most people switch out the fans anyway. I would like the case so I put my pc in a more rigid case than the test bench I 3d printed.
Could I connect the 5v of the board to this board that comes in the case and then, if I need more ports, connect it to this board from the 1 X 2 split case?
I just wanna ask if the led button on the case can be link to a new argb controller if I will switch the stock controller with a new one with new fans?
I'm looking for an M-ATX case for my pc because I want to go CPU AIO in front as an intake but my current case doesn't have enough space after putting in a 30cm 3070ti. Is the case sufficient enough for a front mounting AIO if the GPU is that long?
Hey I recently finished a build with this but I can’t get the argb to work, it just won’t light up. I connected the argb input wire to the jrainbow1 header on my B550 pro vdh Wi-Fi motherboard but it won’t work. Any tips??
i have Air 100 ARGB All White the fans RGB light can't stay at the color i wanted. every time i restart or on my pc the color change back to the default color. Please Help.
Hi there! I have Corsair Vengeance pro RGB RAM Sticks (the one with tall heatspreaders), was wondering if there would be any clearance issues with the following combination: ( Montech Air100 + H100i RGB pro XT + Corsair Vengeance Pro RAM) thoughts?
I like this case... I might pick this up from Micro Center for my wife's comp... Stock fans would be fine for her computer. 8th Gen i5 mini itx with only a 1030 graphics card. She doesn't game but is looking for a nice cheap case.
I bought the case and built in it.after building the fans turned on and after tweaking stuff in bios the fans stopped spinning.the RGB works but the fans won't spin.can you help me with the installation of the fans I'm not sure what I'm doing wrong
missed your videos. your videos inspired me using Chinese RGB fans for builds. It would be awesome if I could have this case for the EZDIY white moonlight fans I just bought.
Hey man! Just built my first pc in this case and everything is perfect and running except for the fans, which light up but don’t spin. This is probably because of the 3 pin cable (with a gab between the first and second hole) which I don’t know where I have to plug in and can’t seem to find any info on it. I know it’s been a long while since you made this, but do you remember where I gotta plug it in? Would really help me out
need a better case im rocking old school 12yr tower from antec air flow is horrible for the components im running atm, demand for better air flow is needed.
I would love this case, I am trying to build my first pc and I have minimal funds but getting this would definitely help a lot. Great review, thanks for the chance to win this.
Yeah I haven’t entered one of your giveaways since like 2017? It’s been a minute. I passed on some Chinese RGB back a couple of years ago. Someone else needed them worse than I did at the time. I still miss the Kosher After Dark on Friday night bruh!
"the cable management worked fine", then shows up the rat's nest lmao haha amazing video
Low on funds and my younger sister really wants a PC to play games with her friends I currently have one but don't let people use it that often because it's so expensive this case would be amazing to help build her first ever PC also love ur content really good stuff keep up the good work man
I def need this case as I’m building my first pc! On a tight budget so this would help a ton! Keep up the great content man😄👍
For a while now I've been wanting to make my first pc, and I ordered all the parts to do so 3 days ago. Everything has come so far except for the 120mm fans and case. They got delayed and were supposed to come yesterday but did not so I got a full refund for both and no case or fans. I had picked a micro atx motherboard for the build and I was looking for a case to fit it. I actually found this same case on amazon and looked up a review for the case on youtube and I stumbled upon this video and saw there was a giveaway. Anyway, that is what I would use the case for. Great review by the way!
Just rebuilt my system into this case to accommodate a 240mm AIO for my 3080 (EVGA Hybrid kit) and it's fantastic. Upgraded the front fans and used a 120mm rad for the Ryzen 7 (downgraded from a 240mm in my older case) and even the CPU temps dropped. Runs cool as a cucumber and looks great
Okay so I’m not sure if I understood or not, but the fans RGB can be controlled either through the motherboard with software or with the reset switch. What about the fan speed? Is it stuck at a constant speed like how older montech cases used a molex plug? Or can you control the fan curves?
The deepcool l240 aio can fit on that? And what aio did you install?
Nice I was stuck between this and the Vetroo M01 Micro-ATX a few weeks ago, I ended up with the Vetroo (Aerocool Atomic clone, and I really like it). Couldn't really find much on this one, looks like a legit budget airflow conternder!
11:39 There's a lite version which is literally 20usd cheaper without those rgb fans
I saw that fan comes with two cables, one is for argb so for what is other one?
wow nice cable management right there! so clean XD
Saw this video and Instantly purchased it 🙏 great video man 💯🔥
I agree case manufacturers need give an option without fans. Not many brands do it. Also most people switch out the fans anyway. I would like the case so I put my pc in a more rigid case than the test bench I 3d printed.
i was looking for a matx i just found it. thanks for the video. i hope one day build a pc w this case. muy BUENO
does the aio fans change color when pressing the led button
Very nice case. As always great job on the video.
💯
Hey i just watch this video review. You said there is a mesh for above the case, can you put the mesh in front perhaps there is a way?
Could I connect the 5v of the board to this board that comes in the case and then, if I need more ports, connect it to this board from the 1 X 2 split case?
I just wanna ask if the led button on the case can be link to a new argb controller if I will switch the stock controller with a new one with new fans?
Hey Bro, did you change the fan colors by reset with the hub that came on the case?
I got a problem the fans are spinning but there not lighting up is there some type of software for it?
Same
I'm looking for an M-ATX case for my pc because I want to go CPU AIO in front as an intake but my current case doesn't have enough space after putting in a 30cm 3070ti.
Is the case sufficient enough for a front mounting AIO if the GPU is that long?
is a case still up for grabs? building a pc and a case is the only thing I'm really struggling to budget on
I don’t understand why they allow mounting three 120 mm fans on front, but not a 360 mm radiator…
Hey I recently finished a build with this but I can’t get the argb to work, it just won’t light up. I connected the argb input wire to the jrainbow1 header on my B550 pro vdh Wi-Fi motherboard but it won’t work. Any tips??
i have Air 100 ARGB All White the fans RGB light can't stay at the color i wanted. every time i restart or on my pc the color change back to the default color. Please Help.
Compare this to darkflash dlm 21 mesh. Which one do you think is better?
Hey man im planning to get a new case should i go with the montech air 100 litr or the dlm 22
Montech air 100
Can you fit a 360mm radiator in the front,, if you remove the hdd slot at the bottom? I think it can fit if you remove it,, what do you think 🤔
Same question. have you tried it? im planning to put a Aorus 360p. but im not sure
Don't believe it will fit natively
I would love this case to update my HP pre-built. I do have man-hands, could I get the front panel off?
Please help me. My mobo is h610m and montech air 100 argb case. My fan has only 1 led color.
Can the fans be synced with the motherboard via 3 pin connector?
Hi there! I have Corsair Vengeance pro RGB RAM Sticks (the one with tall heatspreaders), was wondering if there would be any clearance issues with the following combination: ( Montech Air100 + H100i RGB pro XT + Corsair Vengeance Pro RAM) thoughts?
What aio are you using? 280mm?
is this better than dlm21 mesh? or they are just the same?
Hoping to build my 1st PC and this case looks great!
did the fans work good for ya?
So which one is the best ? Air X or the Air 100?
Hi bro, is the fan easy to change to another type of fan?
I like this case... I might pick this up from Micro Center for my wife's comp... Stock fans would be fine for her computer. 8th Gen i5 mini itx with only a 1030 graphics card. She doesn't game but is looking for a nice cheap case.
Do you think the top can fit a 280mm AIO?
Do you prefer this or the musetex matax you reviewed?
This
Best air flow case. love it.
can gpu vertical mount will fit? i have aorus RTX2080ti tri-fan
hi, is this fan can synced with asrock polychrome software?
My 4 fans in this case light up but won’t spin?
Any idea if that montech branding is removable?
Are the pre installed fans PWM sync?
here in brazil we call this type of "cable organization" a rat's nest lol XD, it was pretty cool in this case
Excelente video irmao, ficou brabo
Nice nice. Im trying to find something to go well with my phateks 719. Thinking a p500. The 3000 series are super wide
I bought the case and built in it.after building the fans turned on and after tweaking stuff in bios the fans stopped spinning.the RGB works but the fans won't spin.can you help me with the installation of the fans I'm not sure what I'm doing wrong
Hello, F5 Sojib. Did you figure out how to fix the fans spinning issue?
Is the front mesh cover magnetic?
Does it actually fit a 330mm graphics card?
Ty for the vid, I'm trying to make a budget PC
will the airflow be okay if i have 280mm aio cpu cooler attach on the top of the case? will it be okay for the airflow?
A 280 won't fit on top a 240 will.
KT, that case is fire now watch after your video both color is going to be sold out.
Lol nah nah Kosher don't got that type of influence
missed your videos. your videos inspired me using Chinese RGB fans for builds. It would be awesome if I could have this case for the EZDIY white moonlight fans I just bought.
Hey man! Just built my first pc in this case and everything is perfect and running except for the fans, which light up but don’t spin. This is probably because of the 3 pin cable (with a gab between the first and second hole) which I don’t know where I have to plug in and can’t seem to find any info on it. I know it’s been a long while since you made this, but do you remember where I gotta plug it in? Would really help me out
Hello, Mia. Did you figure out how to fix the fans spinning issue?
i have the same problem aswell, i don’t know where to plug 3 pin, any help is appreciated
Ey how about the Air 1000 lite? Like I mean the stealth factor of the air 1000 lite.
This case will go good with my vetroo cpu cooler that you reviewed ( does it fit a 980? )
Yea 980 will be np
Quick Question, Can I use ID Cooling Zoomflow XT 240MM Radiator with this right?
yeah a 240mm will work
@@KosherTech responded too late, i bought a tecware vxr case and tecware mirage 360 rad
Looks great, thanks for the review! But why put a 240mm AIO on an R5 3600?
Lol which AIO size I should have put?
I'd take this case
@@KosherTech haha sorry Kosh, I don't know why I wrote this. Must've been late. Thanks for making the video.
The fans are 4 pines?
Where is lian li st120 fans review. Its been 1 month.. i saw your community post you ordered those fans...but still no review.
I know I know my bad vid will be dropping dis Wednesday
@@KosherTech bad vid???
Lol nah nah that vid is dropping today at 10am est
This case gonna be with my budget pc :)
I really just need a case to start my PC Journey
This would be excellent for my first build!
I’ve been working on an editing/music creating/gaming of build and this case would work great!
Everything I see you review a white case I want to change mine out!. Lol
Lol only reason I do that cause it's easy to showcase white on camera
Trying to finish a build for my wife would love that
I dont even have a case for real😑😑and my board is matx..Plzz i want this case ..Its a Beauty !
Watched all your montech case vids and this one’s definitely a banger! Would love to win this so I can build my first pc!
I love this case but Montech don’t ship it to the U.K. I would pay extra for them to ship it to me ☹️
Is his plate resistant?
Is it fit with 3 fan gpu?
need a better case im rocking old school 12yr tower from antec air flow is horrible for the components im running atm, demand for better air flow is needed.
Aye congrats u WON!! replay to this comment within 48 hours to claim this case. Also DM me on Instagram or Twitter plz
I'd use this case to make a home theater pc with my star wars edition gtx titan xp for my living room
Motherboard B550M são suportadas ?
What motherboard do you have?
I would love this case, I am trying to build my first pc and I have minimal funds but getting this would definitely help a lot. Great review, thanks for the chance to win this.
can i turn the rgb off?
What cpu cooler is good?
$20 price point: id-cooling se-214-xt
$35 price point: phantom spirit 120se
$50 price point: phantom spirit 120 evo
Love this case, I'm also working on a video about it.
Nice! Drop a link to the vid once it up 💯
@@KosherTech th-cam.com/video/ttK93XDHiKo/w-d-xo.html Gave you a mention at the 4:20 mark.
Yuup just sow appreciate the ❤️💯
I sure would like to win this case. I been looking for it online an it seems to be non existent. Help a fellow out please.
Gotta get a psu shroud my q300l doesn’t have one 😭😭
I would love to have this cuz never try a white and atx case with awesome looks. Im currently using generic atx cvs case tho hahahahah
Really I am waiting for gpu msrp price since the beginning of the year soo if I got it my year challenge or achievement will be achieved. 😊
Nvm I'm not in US lol but nice case
Would love to win this to give to a co-worker who is looking to do a new build. Currently his build a about 10yr+old.
"Aluminum, or chinese steel I would say" 😂
Bro why am I looking at pc’s know I’m broke and can’t even Afford a console
Have you reviewed the montech AIRX?
That case is by far my ❤️ & yes I did review it ☺️ th-cam.com/video/4yAzhkP4k3A/w-d-xo.html
@@KosherTech oh that's pretty cool! Did you also review the montech fighter or X3?
Fighter I didn't X3 I already order that review will drop within the month.
@@KosherTech I'm so FRICKIN excited! Keep up the good videos dude!
Thank u!!
11:03 nice tip
I like this mesh type case
I want this case because I have an old ugly black POS. I need me some sparkly white and some RGB baby!
Lol Eric wants to win a giveaway dis a first 😱
Yeah I haven’t entered one of your giveaways since like 2017? It’s been a minute. I passed on some Chinese RGB back a couple of years ago. Someone else needed them worse than I did at the time. I still miss the Kosher After Dark on Friday night bruh!
Lol
whats the mobo
I hope I win this PC because I never had one.
can i get the case plz my build is almost complete
Nice one
I love it I what to be a gamer
550 views but only 49 likes! Come on guys......
Lol right