Hey, I just got the same case and similar PC parts! My parts haven't arrived yet but I was wondering at 2:26, did the termal paste come from the Cooler? Thanks!
@@unitedslaysfv2166 for me, 1 to 1.5 hours. For a beginner, a good few hours maybe. Really depends how mechanically inclined you are. Watch as much how to videos as you can.
I had to shift the fan up a little or you can use lower profile ram. You could also use a smaller cooler for the 7600x especially if you utilize PBO on b650 MBs
They are pretty good. Not very loud. Yes you can. I haven't used 3pin fans in a long time so wasn't aware of the voltage control detection in modern mobos
@@NewEra-us9gd the included controller. It's routed to the reset switch. all fans are connected to the switch and a 5v led header on the mobo. You can then control them from the switch or mobo software
@@exoticplays6080 I believe they come daisy chained so you just connect the last connector into a open 4 pin fan header on the motherboard. Since the fans are 3 pin you will have 1 exposed pin on the header
![[Full] 4 ต่อ 4 Celebrity EP.920 | 3 พ.ย. 67 | one31](http://i.ytimg.com/vi/KwiW2M_kAg4/mqdefault.jpg)
This is my dream build 😊😊😊
thanks for this, have similar setup in my next build...
would you add another fan(s) on top for air flow?
What camera do you use man?
sony a74
Great video! I want to buy this GPU, but I wanted to know if it would fit in the case, thanks :)
Thank you! Glad it helped.
Hey, I just got the same case and similar PC parts! My parts haven't arrived yet but I was wondering at 2:26, did the termal paste come from the Cooler? Thanks!
@@unitedslaysfv2166 yes. Thermal paste is provided with the cooler
same!
Same case/cpu cooler. Are your CPU fans backwards or did I install mine wrong? Mine go clockwise and kept stock Air 100 fans counterclockwise. Thanks!
They come pre-installed and are in the correct orientation
hello ilike your build, may i ask why you used 650w while the recomended of the gpu is 700w. pls answer , it helps a lot , more vid .
@@jhilldaniel8737 the estimated power for these system components is 450w
Also the recommended psu is usually accounting that you have the newest cpu with it
Random question but how long did it take to build this ? Say for a beginner builder if I follow your guide. Thanks!
@@unitedslaysfv2166 for me, 1 to 1.5 hours. For a beginner, a good few hours maybe. Really depends how mechanically inclined you are. Watch as much how to videos as you can.
@@poweredbychris Thanks !
Underrated af
Are these the stock fans? Can I put in in single colour only?
@@thundridical5728 they are addressable RGB, so yes
How did you fit the cpu cooler with ram I have a build fairly similar to this also any other suggestion for cpu coolers
I had to shift the fan up a little or you can use lower profile ram. You could also use a smaller cooler for the 7600x especially if you utilize PBO on b650 MBs
In the website you can clearly see that the fan hub has 4 3-pins connectors. Why is there 6 on this one?
@@realsmugg idk
Is this case fit for the Ak500 digital? I'm planning to buy that case.
Should be
did you get the case? i was wondering the same and if it needed lifting as well.
did you get the case? i was wondering the same and if it needed lifting as well.
How are the case fans? I am assuming you can control the DC fans in the bios?
They are pretty good. Not very loud. Yes you can. I haven't used 3pin fans in a long time so wasn't aware of the voltage control detection in modern mobos
@@poweredbychris Thanks alot mate. Will be building a PC in this so great to know.
I am confused.... Why did he use AM4 CPU cooler backets when the Ryzen 5 7600x is an AM5 CPU???
@@poseidon1038 because it's the same.
Deepcool AG620 funciona neste gabinete ?
Yes
How did u sink the color of your case cpu rgb to your cooler?
@@NewEra-us9gd the included controller. It's routed to the reset switch. all fans are connected to the switch and a 5v led header on the mobo. You can then control them from the switch or mobo software
@@poweredbychris I can connect my cpu cooler fan in the back of the built in switch?
I’m using this cas and looked at 10 videos can’t get power to my fans and every video they skip over the wirimg
@@exoticplays6080 I believe they come daisy chained so you just connect the last connector into a open 4 pin fan header on the motherboard. Since the fans are 3 pin you will have 1 exposed pin on the header
no support bracket for the gpu?
@@hoijamm didn't come with one
@@poweredbychris can i use arctic p12 argb and connect it directly to the montech rgb hub ?
@@hoijamm yes
FIRST