🇬🇧 Vauxhall Corsa D Heater Blower only works on 4 (Maximum) How To Repair

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ต.ค. 2024

ความคิดเห็น • 433

  • @JonWhitley-p5r
    @JonWhitley-p5r 7 หลายเดือนก่อน +2

    Absolutely spot on. To the point, no fluff and accurate - just what I needed and saved me from trying to access the back of the switch.
    Many thanks
    Jon

    • @aaanton11
      @aaanton11  7 หลายเดือนก่อน

      You're very welcome Thanks for the great comments👍🏻👍🏻🛠

  • @JM-rm3lt
    @JM-rm3lt 3 ปีที่แล้ว +12

    Mine just needed pushing in. Many thanks mate, really helped me out when I don’t have much money.

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว +1

      Thanks for the great comments👍🏻👍🏻🛠

    • @kyleellis7421
      @kyleellis7421 ปีที่แล้ว +1

      Mine just needed pushing in a bit as well! Thanks for the video

    • @rdabbott
      @rdabbott 28 วันที่ผ่านมา

      Thanks mate. You just saved me £10 🙂

  • @compaq416
    @compaq416 4 ปีที่แล้ว +24

    Video spot on, a big thank you for taking the time to do a first class job

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว +1

      Thanks for the great comments👍🏻👍🏻🛠

  • @staceylee8727
    @staceylee8727 ปีที่แล้ว +1

    Thanks so much! Managed to contortionist myself into the footwell and do it, blower now works. So chuffed 💃🏻

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Well done, Thanks for the great comments👍🏻👍🏻🛠

  • @Stefano_Marzaroli
    @Stefano_Marzaroli 11 หลายเดือนก่อน

    Hi Anton, I really congratulate you for the clarity with which you explained everything....in particular, the technique with which you extracted the resistor from its housing...really GOLD advises for me as I'm just a neophyte! !! Thanks again

    • @aaanton11
      @aaanton11  11 หลายเดือนก่อน

      Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

  • @ianrobertson9968
    @ianrobertson9968 3 ปีที่แล้ว +3

    Thanks for this, very helpful,my daughters Corsa D had the same problem,removed the resistor and one of the pins was corroded slightly,cleaned it up and it worked fine again.

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @keithsmith6932
    @keithsmith6932 2 ปีที่แล้ว

    Perfect. My wifes new car is a 1.2 litre Energy. Has just this problem and now I know exactly how to fix it, Most certainly deserves a like and subscription.

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว +1

      Thanks for the great comments👍🏻👍🏻🛠

    • @keithsmith6932
      @keithsmith6932 2 ปีที่แล้ว

      @@aaanton11 welcome sir

  • @brendandeeds1020
    @brendandeeds1020 ปีที่แล้ว +1

    Great video. Unfortunately this was a long job for me due to various problems with the connector plug but I eventually got it solved. Without this video I wouldn’t even know where to start. Big thanks!!!

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @hughoverend
    @hughoverend 3 ปีที่แล้ว +6

    Thanks bud - thanks to this video got my first ever car repair done myself! Really clear instructions.

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว +2

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

    • @ElhadjiAboutKDiouf
      @ElhadjiAboutKDiouf 2 ปีที่แล้ว

      I need your prompt reply asap now!

  • @glenthompson4625
    @glenthompson4625 4 ปีที่แล้ว +1

    Thanks for video. Got resistor off Internet for 12 quid including P&p and managed to fit myself. Only fiddly bit was getting the screw in and out. Now the heater works as normal. Saved me quite a bit of money as garages quoted between £50-£80 to replace it. If you have the same problem with your Corsa, I would recommend you follow this video and try do it yourself. If I can do it, anyone can.

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว +1

      Thanks Glen for the great comments👍🏻👍🏻🛠

  • @truebelief8870
    @truebelief8870 ปีที่แล้ว +2

    Thank you Anton! The video was spot on mate! Very clear, short and precise 👍 I've managed to replace the heat resistor and heaters are working perfectly fine.. Muchly appreciated!

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @drewsmith6066
    @drewsmith6066 4 ปีที่แล้ว

    Cheers chap just fixed mine after watching this ...i pulled the plug out and pushed it back in and it now works spot on... ..thanks again ill remember this fix

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @ethanmiller8457
    @ethanmiller8457 5 ปีที่แล้ว +8

    thanks very useful information - just happend on mine wondering if this is common fault on corsas. never heard of it happening on other cars. thanks for posting

    • @aaanton11
      @aaanton11  5 ปีที่แล้ว +1

      It’s a common fault on all cars that use these resistors, thanks for the great comments 👍🏻👍🏻🛠

  • @glenns7139
    @glenns7139 3 ปีที่แล้ว +1

    Had the same issue. Ordered a new one off amazon along with a 5.5mm socket. 5 min job all good. Thanks alot for the heads up. The only issue i had is that one of theblocating lugs was off so had to carefully grind it off. Popped in a treat.

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

  • @simondavey2632
    @simondavey2632 9 หลายเดือนก่อน

    Perfect. I have just sorted my father in laws heater using your video, thanks. FYI, his bolt was slightly bigger than 5mm so used my pals 7/32 spanner and all sorted, so thanks very much for posting.

    • @aaanton11
      @aaanton11  9 หลายเดือนก่อน

      Thanks for the great information👍🏻👍🏻🛠

    • @tomcabot5753
      @tomcabot5753 9 หลายเดือนก่อน

      Yes - what TH-cam tutorials should be like! But can confirm Simon Davey's experience. I just swapped out on a 2012 Corsa SE 1.4 and it had 5.5mm nut (although replacement-part bolt/screw was 5mm) ... initial frustration followed by some relief on finding a 5.5mm socket knocking around the house ... @@aaanton11

  • @1966ianmiller
    @1966ianmiller 2 ปีที่แล้ว +1

    Thank you so very much, no more freezing cold hands for me now, well done, your video was very clear and the unit was so simple to swap.

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

    • @saimwarriach9291
      @saimwarriach9291 2 ปีที่แล้ว

      My heater is not working properly so what should i do .

  • @adriancannon4401
    @adriancannon4401 ปีที่แล้ว

    Daughter very happy now fan fixed on her car. Great tip about clips and how to get resistor out. Thank you

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @bencarruk
    @bencarruk 3 ปีที่แล้ว

    Brought the new part from Amazon.
    Unplugged the old one.
    Realised I don't have the right tool to remove the old one.
    Plugged back into the old one.
    It's now all working again 🤣
    I've wasted £9.99.
    Great video though keep up the good work.

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      The connector plug will be melted pull it off and check it again you might need to replace the plug there is also a link for that in the description Thanks for the great comments👍🏻👍🏻🛠

    • @bencarruk
      @bencarruk 3 ปีที่แล้ว

      @@aaanton11 thanks I'll see how it works next time I'm in the car.

  • @muhammadadil7076
    @muhammadadil7076 4 ปีที่แล้ว

    My car heater was only working on 4 . After i changed the resister it works on all now . Thanks for upload it really helped and saved my some dosh.

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @rdabbott
    @rdabbott 28 วันที่ผ่านมา

    Exactly the problem on my car. Even a link to Amazon for Resistor. SUPERSTAR!!!!! 🙂

    • @aaanton11
      @aaanton11  27 วันที่ผ่านมา

      Thanks for the great comments👍🏻👍🏻🛠

  • @paulnewman9275
    @paulnewman9275 4 ปีที่แล้ว +2

    Great - many thanks, my daughter and her Corsa D thank you for saving her from the "Max or nothing" syndrome :)

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว +1

      Glad it helped!, Thanks Paul for the great comments👍🏻👍🏻🛠

  • @mikefranky
    @mikefranky 5 ปีที่แล้ว

    My corsa van heater played up this morning only speed 4 working! A big Thankyou for the video as this is my job this week saves me booking it into a garage
    Cheers fella

    • @aaanton11
      @aaanton11  5 ปีที่แล้ว

      Thanks for the great 👍🏻👍🏻🛠

  • @dinodino5760
    @dinodino5760 9 หลายเดือนก่อน

    Best video.BEFORE REMOVING THE PART TRY TO SHAKE IT- contact might be the issue as the part is located at the passenger feet

    • @aaanton11
      @aaanton11  9 หลายเดือนก่อน

      Thanks for the great information👍🏻👍🏻🛠

  • @antalz
    @antalz ปีที่แล้ว

    Thanks a lot mate, especially the clear footage in such a nightmare of a spot to work in was very helpful. Cheers!

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @Stilly94
    @Stilly94 2 ปีที่แล้ว

    Great video! Just followed this and my blowers are working perfect! Wish I had seen this video a year and a half ago when they first stopped working properly!

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว +1

      Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

    • @Stilly94
      @Stilly94 2 ปีที่แล้ว

      @@aaanton11 so it has worked perfectly for the last 3 days and now it’s completely shut off again 😅. Any ideas?

  • @heavymetal3rocks
    @heavymetal3rocks 2 ปีที่แล้ว

    Thanks for this. I will try changing it myself once the part gets delivered.

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      No problem 👍 Thanks for the great comments👍🏻👍🏻🛠

  • @AstonColey
    @AstonColey 8 หลายเดือนก่อน

    Great video and my Vauxhall Corsa van has the problem. I will be following your instructions and and will let you know if I am successful. Cheers

    • @aaanton11
      @aaanton11  8 หลายเดือนก่อน

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

    • @AstonColey
      @AstonColey 8 หลายเดือนก่อน

      It worked a treat and I now have a fully functioning fan. Cause was a dirty connector pin with verdigris on it. Measured resistance taps all good measured thermal fuse and that was 0 ohms. Cleaned pin and rubbed vasseline on the pins- reassembled tested okay. Thank you so much!!

  • @MatchboxGarage
    @MatchboxGarage 3 ปีที่แล้ว +1

    Thanks again mate. Unfortunately for me this is the second time referring to this video as the previous resistor didn't last long

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      You will either need a new connection plug or a new motor the plug is the more common one links are in the description Thanks for the great comments👍🏻👍🏻🛠

  • @rickerd83
    @rickerd83 2 ปีที่แล้ว

    Thanks!! seems like my plug just had some dirt in it. I removed it, blew the connector out with some compressed air and works perfectly now!

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว +1

      Nice work! Thanks for the great comments👍🏻👍🏻🛠

  • @wicklapaul69
    @wicklapaul69 3 ปีที่แล้ว

    Good video, straight to the point and no rabbiting on for 10 minutes,

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว +1

      Thanks for the great comments👍🏻👍🏻🛠

  • @kissrobert7599
    @kissrobert7599 5 ปีที่แล้ว +5

    Thank you very much for this tutorial, it helped me soo much. I recommand this video to everyone who has this problem, thanks again!!! Liked subscribed.

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว +1

      Thanks for the great comments👍🏻👍🏻🛠

    • @julianwhitehead2433
      @julianwhitehead2433 4 ปีที่แล้ว

      @@aaanton11 cheers, I'll order the part and give it a go.

  • @JFAR49ER
    @JFAR49ER ปีที่แล้ว +2

    I had same problem and when I unplugged and plugged the wiring into the resistor it sorted itself. Just to say try that first before full resistor replacement

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Your connector plug will be melting, have a look at the pins, link to new one ion the video description, Thanks for the great comments👍🏻👍🏻🛠

  • @thomasrpoulsen
    @thomasrpoulsen 3 หลายเดือนก่อน

    If you have a left-hand drive car (i.e. Opel) then the resistance must be pushed to the right when you take it out. It's a really good video. The bolt that holds the resistor is actually a 5.5 mm, completely idiotic, but I got it out with a spanner and a pair of pliers as I only have keys in whole mm. Thanks for the video mate.

    • @aaanton11
      @aaanton11  3 หลายเดือนก่อน

      Thanks for the great information👍🏻👍🏻🛠

    • @jordankiroski9431
      @jordankiroski9431 2 หลายเดือนก่อน

      Hey is the connector under the steering wheel or the glove box on the left-hand drive opels?

  • @SteveSullivan-kr9so
    @SteveSullivan-kr9so 9 หลายเดือนก่อน

    Great video, took me an hour to find a socket to fit and get my massive body in the footwell. 5 mins to change

    • @aaanton11
      @aaanton11  9 หลายเดือนก่อน

      😂 Thanks for the great comments👍🏻👍🏻🛠

  • @malcolmdawson4494
    @malcolmdawson4494 3 ปีที่แล้ว

    Great video,this has saved me £50.00 at the garage,many many thanks top job....

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @jimmccabe5760
    @jimmccabe5760 3 ปีที่แล้ว +1

    Great advice on replacement done and dusted 10 mins tks

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

  • @shadyash1978
    @shadyash1978 ปีที่แล้ว

    Excellent. Top man, I was scared that I would probably have to replace the fan.

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @kikabih
    @kikabih 2 ปีที่แล้ว

    Thanks so much for the video, currently have the same probem only works on 4

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @paulpickup6935
    @paulpickup6935 3 ปีที่แล้ว

    thanks saved me a few bob on garage fees. part cost £5.49 on ebay . the tip about the two awkward plastic tangs (not mentioned in Haynes Corsa D manual) was useful in removing/refitting

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @ak-fz3vy
    @ak-fz3vy 2 ปีที่แล้ว

    Thanks - very clear. its the third one thats failed over about 8 years - so looks like a common fault

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @Hello_Neighbour_Shadow
    @Hello_Neighbour_Shadow 3 ปีที่แล้ว

    Managed it in about 10 mins. Hope it lasts a bit like. Excellent video mate.

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @bertiesworld
    @bertiesworld 3 ปีที่แล้ว +2

    Good video but when replacing it do bear in mind the mileage the vehicle might have done. I'm at 150K and I'd already replaced the resister bank quite some time ago and when the fan would only run on 4, thought I know exactly what it is (had the same on a Citroen). Swapped it out but while driving the 5 miles into town, I started to get a nice burning smell into the car. I switched the fan off! I have just taken out the fan and it runs reasonably well on pos. 4 but doesn't turn at all on pos. 1 and not much better on 2. And spinning the fan I'm lucky to get one revolution. Bearings are shot.
    So yes, you might get away with replacing these resisters (its an easy fix) but it isn't always the problem. Btw compared to the Citroen replacing it on the Corsa is a walk in the park.

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Thanks for the great information👍🏻👍🏻🛠

  • @puddipatrol2324
    @puddipatrol2324 3 ปีที่แล้ว

    Mine just needed a little push and started working , cheers mate , really appreciate it 💯 had to subscribe

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @dyathi8598
    @dyathi8598 4 ปีที่แล้ว +1

    Thanks for the good explanation. I managed to fix it. it was explained very factually and easily. nice greetings from Germany 👍👍

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว +1

      Glad it helped!, Thanks for the great comments👍🏻👍🏻🛠

  • @BrianJ.
    @BrianJ. 2 หลายเดือนก่อน

    They replaced my cabin filter today, among other things. My blower now only works on level 1-3. I suspect the plug is a bit loose. Will check it out later!

    • @aaanton11
      @aaanton11  2 หลายเดือนก่อน +1

      Yes you might be right, Thanks for the great comments👍🏻👍🏻🛠

  • @jhewitthunt
    @jhewitthunt 3 ปีที่แล้ว +2

    Exactly what I needed, and brilliantly explained. Thanks very much!

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว +1

      Thanks for the great comments👍🏻👍🏻🛠

  • @mindbodysoulmeditationmusi3557
    @mindbodysoulmeditationmusi3557 3 ปีที่แล้ว +1

    Love your video my friend. I just changed mine following your tutorial. Wonderful video; very informative helpful!!

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

  • @gunsdonovan9183
    @gunsdonovan9183 3 ปีที่แล้ว

    Watched this video, done the job in 10 minutes, (im 6' 2'') note to self take the seat out first next time, thank you aaanton11, thank you very much, love my corsa again !!!!

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

  • @tongaib
    @tongaib 10 หลายเดือนก่อน

    thanks pal, managed to replace my heat resistor today.👍

    • @aaanton11
      @aaanton11  10 หลายเดือนก่อน

      Well done, Thanks for the great comments👍🏻👍🏻🛠

  • @connorl7012
    @connorl7012 3 ปีที่แล้ว

    Great video, i actually did not know where the resistor was until this video so i just banged mine for the meantime with my hand and it works 🙂😁

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      I would check the connector for melting, Thanks for the great comments👍🏻👍🏻🛠

  • @leecowan6366
    @leecowan6366 2 ปีที่แล้ว

    This has just happened on me today, thank god for this vid, I'll be sorting it out myself now 👌

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      well done, Thanks for the great comments👍🏻👍🏻🛠

  • @jod125
    @jod125 3 ปีที่แล้ว +1

    This was very helpful. I managed to change it myself. Thanks so much for the video!

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว +1

      Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

  • @sweetscience1988
    @sweetscience1988 4 ปีที่แล้ว

    Top man! Probably saved me a few hundred quid at the garage.
    Thanks!

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      Glad I could help Thanks for the great comments👍🏻👍🏻🛠

  • @solroche7238
    @solroche7238 9 หลายเดือนก่อน

    Top man Anton, video was spot on 👍🏻

    • @aaanton11
      @aaanton11  9 หลายเดือนก่อน

      Thanks for the great comments👍🏻👍🏻🛠

  • @marcelogasbarro6943
    @marcelogasbarro6943 ปีที่แล้ว

    Just did for my corsa E. Thanks for the video!!

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

  • @SR-sr3fh
    @SR-sr3fh 2 ปีที่แล้ว

    Worked perfect, part cost £7 on eBay. Nice one 👍

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

  • @Discover99
    @Discover99 4 ปีที่แล้ว

    That's wat is called professional video and support

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @jayland1874
    @jayland1874 3 ปีที่แล้ว +1

    Great video!
    I've just ordered my new resistor as I have the same fault. Do you know if the bad resistor will cause the car and spanner light to come on? I've ran a obd check and no codes but my light is on so I'm wondering if it's down to this?.

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Not normally, the spanner light will be another fault, Thanks for the great comments👍🏻👍🏻🛠

  • @alih8138
    @alih8138 3 ปีที่แล้ว

    Thanks mate. Saved me a good £50 if I went through the garage!

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Glad it helped, Thanks for the great comments👍🏻👍🏻🛠

  • @steveswainsbury4035
    @steveswainsbury4035 ปีที่แล้ว

    Thanks . Knew what the problem was but now I know where it is

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @oxocube94
    @oxocube94 4 ปีที่แล้ว

    Just did this for my 2012 hatchback Corsa d, it worked thanks so much!

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      Glad it helped!, Thanks for the great comments👍🏻👍🏻🛠

  • @richardtwidale3459
    @richardtwidale3459 ปีที่แล้ว

    Thanks for demo ,great help.now know how to do it myself

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Glad to help Thanks for the great comments👍🏻👍🏻🛠

  • @anthonynewman7119
    @anthonynewman7119 2 ปีที่แล้ว

    Did the job,fiddley but your video was very helpful Thanks you😎

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @jos80ph80
    @jos80ph80 2 ปีที่แล้ว

    Very helpful , thanks from Italy

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @mahmoudal-katib1560
    @mahmoudal-katib1560 2 ปีที่แล้ว

    Thank you, this clip is very helpful ,great effort

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @MatchboxGarage
    @MatchboxGarage 4 ปีที่แล้ว

    Thank you mate. You helped me do the wife's car today 👍🏼😎💪🏼

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @pooledrivingschool
    @pooledrivingschool 3 ปีที่แล้ว

    Great vid, My son has this problem with his Corsa so we ordered the part and fixed, happy days. One day later it went back to same problem, he also said he could smell a "burning smell" before and after we replaced the part. Any ideas?

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      possible the connector plug is melted, or the heater motor is binding, usually the connector is the issue, new ones amzn.to/37tYVKp Thanks for the great comments👍🏻👍🏻🛠

  • @alexanderwiebe8109
    @alexanderwiebe8109 10 หลายเดือนก่อน

    Thank you very much for this very good video. I've must resolve now this problem, too and this clip is perfect to replace this resister on my own.
    I learned that there should be different values ​​of resistance (or does it not matter?).
    Which one would be for a 2011 Vauxhall Corsa (german production)?
    Best Regards from germany.

    • @aaanton11
      @aaanton11  10 หลายเดือนก่อน +1

      Amazon Link to buy new Heater Resistor, £9.99, amzn.to/3J3r5z0
      1/4 Socket set £22 amzn.to/3868RI1
      5mm.Screwdriver £6 amzn.to/33S2Wa4
      Heater resistor and new connector plug £13 amzn.to/37tYVKp
      Thanks for the great comments👍🏻👍🏻🛠

  • @mariomioc3800
    @mariomioc3800 4 ปีที่แล้ว

    Thank you aaanton11!! Saved me some money going to garage! Greetings from Croatia!

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      Great stuff, Thanks for the great comments👍🏻👍🏻🛠

  • @danmatthews3431
    @danmatthews3431 9 หลายเดือนก่อน

    Thanks for this - mine works on every setting EXCEPT 4, any idea if it's the same issue?

    • @aaanton11
      @aaanton11  9 หลายเดือนก่อน

      It should be. Thanks for the great comments👍🏻👍🏻🛠

  • @Chalavundiinka
    @Chalavundiinka 2 หลายเดือนก่อน

    I have the same issue thanks for the video mate reallly appreciate it

    • @aaanton11
      @aaanton11  2 หลายเดือนก่อน

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @mikexc90
    @mikexc90 ปีที่แล้ว

    Did the replacement one double up on the power pins ? As normally it only has 2 power wires, the later ones have 4 pins, 2 live and 2 negative so need to also change to an new plug and add the extra 2 wires in

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      It will work just leave the extra pins blank, Thanks for the great comments👍🏻👍🏻🛠

  • @okwyikenta876
    @okwyikenta876 2 ปีที่แล้ว

    Fantastic 👏👏👏👏,Very helpful changed my today Thanks👍

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Great to hear! Thanks for the great comments👍🏻👍🏻🛠

  • @jamieannakin2346
    @jamieannakin2346 9 หลายเดือนก่อน

    Hi Anton great video. Can I ask, would this be the same solution on a Vauxhall corsa 1.2 2008 model with same issue please ?

    • @aaanton11
      @aaanton11  9 หลายเดือนก่อน

      Yes all the same, Thanks for the great comments👍🏻👍🏻🛠

  • @adamwake1915
    @adamwake1915 10 หลายเดือนก่อน

    Question.......was the car on the floor or up on a ramp? Almost breaking my back trying to squeeze the 2 clips together to remove the old resistor. Seems to be major ag being left handed.

    • @aaanton11
      @aaanton11  10 หลายเดือนก่อน

      on the floor, Thanks for the great comments👍🏻👍🏻🛠

  • @jmanj5902
    @jmanj5902 3 ปีที่แล้ว

    Thank you so much very easy vedio to follow you saved me money. God bless you

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @johnobrien54
    @johnobrien54 9 วันที่ผ่านมา

    ABSOLUTE LIFE SAVER THANKS

    • @aaanton11
      @aaanton11  8 วันที่ผ่านมา

      Thanks for the great comments👍🏻👍🏻🛠

  • @precioush7214
    @precioush7214 ปีที่แล้ว

    I have this exact problem so thank you for sharing. My windscreen fan suddenly stopped working but there's a noise coming through. Will this fix it or is it a separate problem do you know? Thank you!

    • @aaanton11
      @aaanton11  ปีที่แล้ว +1

      If warm air is blowing from other vents its not this issue, Thanks for the great comments👍🏻👍🏻🛠

    • @precioush7214
      @precioush7214 ปีที่แล้ว

      @@aaanton11 That's great! Thank you for your response 🙂

  • @ashleywhittaker8830
    @ashleywhittaker8830 4 ปีที่แล้ว +1

    What tool do I need to take the old one out because it isn't a normal screw thank you

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      The screw is a 5mm size, tool for the job if you don't have a socket set is amzn.to/33S2Wa4 for £6 Thanks for the great comments👍🏻👍🏻🛠

    • @khuramnasar549
      @khuramnasar549 4 ปีที่แล้ว

      Haha count me in too! I just been hit with the issue tgus morning

    • @ashleywhittaker8830
      @ashleywhittaker8830 4 ปีที่แล้ว +2

      Did mine this morning the size is 5.5 not 5 all done and working fine

  • @marwanoko
    @marwanoko 4 ปีที่แล้ว

    Thanks for the video! I replaced mine, but it broke down again a few days later. Could it be the fusee and do you perhaps now which one it is?

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      If your motor is pulling too many amps it will damage the resistor, does it work on max or has it stopped all-together Thanks for the great comments👍🏻👍🏻🛠

  • @jamiesmitham2713
    @jamiesmitham2713 3 ปีที่แล้ว

    hi could you tell why i would have low pressure coming through the vents of my Corsa d blower seems to be working fine on all 4 setting can here it but nearly no air ? thanks for these videos

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Your pollen filter might be blocked, Thanks for the great comments👍🏻👍🏻🛠

  • @fax4933
    @fax4933 3 ปีที่แล้ว +1

    Absolutely brilliant video well explained thank you

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @jideoluleye7137
    @jideoluleye7137 ปีที่แล้ว

    You're a great problem solver.
    What if all the fan speeds work fine, but, only one of the various heating outlets, brings out the hot air?

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      vent control issue, check the side levers on the heater unit, Thanks for the great comments👍🏻👍🏻🛠

  • @qingshenjing777
    @qingshenjing777 4 ปีที่แล้ว

    My car's battery was flat after 3 weeks of not being used, and I have noticed exactly the same problem emerged with the heater blower after the car was jumped to start. Actually by telling from the time when the digital clock stopped working in the car the battery was drained in only 17 days. Just wondering could it be the faulty resistor accelerated the drainage of the battery? I will replace it anyway. Thanks for the video by the way!

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      The resistor will not cause a drain, but the moisture accumulated with lack of use would cause corrosion finishing off the resistor. Thanks for the great comments👍🏻👍🏻🛠

  • @dylanrayphotography3850
    @dylanrayphotography3850 8 หลายเดือนก่อน

    Thank you, I’ve got same problem exactly .

    • @aaanton11
      @aaanton11  8 หลายเดือนก่อน

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @Esk8Nomad
    @Esk8Nomad 3 ปีที่แล้ว

    Thanks so much for the help first time fixing a issue thanks for the clear help

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @adekoiki8907
    @adekoiki8907 ปีที่แล้ว

    Thanks a bunch. Awesome video. Cheap fix

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @MM-qm7jl
    @MM-qm7jl ปีที่แล้ว

    Hi anton I’m wondering if my heater matrix needs to be replaced it makes a gurgle liquidy sound in the same area whilst driving

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      wont be the matrix unless its leaking, possible air in the system, Thanks for the great comments👍🏻👍🏻🛠

  • @andytoddsmith
    @andytoddsmith 4 ปีที่แล้ว

    Great video. Found it quit easy and took only minutes to replace. But it still only works on No4. 1,2 and 3 wont work even with the new resistor. Any ideas. Thanks in advance. Andy

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      I would check the connector plug, they can melt, Thanks for the great comments👍🏻👍🏻🛠

  • @dancedannymaragliano4006
    @dancedannymaragliano4006 3 ปีที่แล้ว

    Hi. Mine has stopped working completely unless I tap my dashboard. Do you reckon it’s the resistor or motor from your experience? Obviously you can’t give me a answer to mine. Just a general answer of you could?

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว +1

      That sounds like a poor connection, check the connector to the resistor they can melt, Thanks for the great comments👍🏻👍🏻🛠

  • @john11k
    @john11k ปีที่แล้ว

    Brilliant
    Thank you , can get my heaters sorted now.
    Owe you a pint sir. 🙏☘️

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      You are very welcome Thanks for the great comments👍🏻👍🏻🛠

  • @Analogrebelable
    @Analogrebelable 4 ปีที่แล้ว

    Thanks for the great video. I've changed 2 resistors and the electrical motor on the car. It works on 1, 2 and 4, but not on 3. Do you have any suggestions?

    • @aaanton11
      @aaanton11  4 ปีที่แล้ว

      possible switch, you will need to put a voltmeter on the resistor and check connections, Thanks for the great comments👍🏻👍🏻🛠

  • @52rol
    @52rol ปีที่แล้ว

    Does this work on vauxhall adam too? We have the same problem with heater and air con only working on setting 4? Thank you

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Yes all the same. Thanks for the great comments👍🏻👍🏻🛠

  • @vas5875
    @vas5875 3 ปีที่แล้ว

    Hello mate. I'm having issue with only one of them, basically the left side from the driver seat is not blowing. Any advice?

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว

      Are the vent veins broken ie has a phone holder been put in damaging them its common to happen, Thanks for the great comments👍🏻👍🏻🛠

  • @leicfoxUK
    @leicfoxUK ปีที่แล้ว

    Great tutorial, many thanks.

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠

  • @harrytomkins3814
    @harrytomkins3814 3 ปีที่แล้ว

    Hello mate great video, do you reckon a new heater resister would solve the issue if settings 1, 2 & 3 work but not 4?

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว +1

      Always worth putting a volt meter on the wires, possible that the connector plug might be melted pull it off and have a look, Thanks for the great comments👍🏻👍🏻🛠

  • @monicaalauddin4422
    @monicaalauddin4422 ปีที่แล้ว

    Thank you so much for this and so easy to understand too you kind person

    • @aaanton11
      @aaanton11  ปีที่แล้ว

      You are so welcome! Thanks for the great comments👍🏻👍🏻🛠

  • @pirotti
    @pirotti 2 ปีที่แล้ว

    Thanks a million. Your shared content was helpfulness.

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠

  • @Handle-This
    @Handle-This 3 ปีที่แล้ว

    Hi mate, my mrs has a corsa and the blower is constantly on. It can’t be adjusted by the dial and sounds like it’s constantly on 1 speed. Also, the direction is constantly blowing towards passengers and can’t be adjusted either. Do u know the fix?

    • @aaanton11
      @aaanton11  3 ปีที่แล้ว +1

      sounds like a switch or wiring issue, Thanks for the great comments👍🏻👍🏻🛠

  • @engineunderyou
    @engineunderyou 2 ปีที่แล้ว

    Thanks! I'll order my replacement today

    • @aaanton11
      @aaanton11  2 ปีที่แล้ว

      Thanks for the great comments👍🏻👍🏻🛠