I just subscribed to your channel man. This is the most informative video I have ever seen! Thanks! Also I just purchased a C64-1 and the board has lots of ports on it now but I guess you have to have that new board for the sound right?
Thank you for your comment 😃 I am glad this video has help you in your Rc hobby and yes you need the new board for the sound, It’s worth it 👍 not too expensive and can be use in most Rc vehicles. Any other questions feel free to ask me and I will try to help you in your Rc adventure and thank you for subscribing.💪
On the servo plug, connector you will need to remove or cut the white wire or leave it alone, is up to you. Just use the plug needed that fits the res-v3 receiver and the other end you can completely cut it off for future use on other project. I hope this helps and any other questions feel free to let me know know and thank you for watching my videos.😀
Hello Aishutty's world 😃 it is not necessary to buy the 2 gear transmission to fit the sound system. The truck is still going to run, except instead of 2 gears just in one gear all the time and the torque is going to be a little bit less with the stock motor. Other than that, the truck runs just fine without the 2 gear transmission and you will have the sound system. You can always upgrade in the future if you like. I hope this helps and thank you for your question and for watching my videos👍
Hola carlos😀 que es lo que ase ahorita? Si seconecta el control con el recividor? La luz verde tiene que estar prendida solida en el control y en la troca las de enfrente. Si estan prendidas solidas?
Hi, @jNeoGaming, i would not recommend it because the higher kv, for example 3300kv is too fast for crawling and the torque is not there. The lower the kv, the more torque you get and for this rc trucks you need torque to climb those rocks or obstacles. So it may work if you connect the res v3, what i mean is that the motor may turned but, no torque power. I have on my truck the wpl 2 speed transmission with a 370 motor and it works great in my opinion. I hope this helps and thank you for watching my videos and your comment👍
@@miltonrcadventure wow thank you for the long reply! Your explaination is what i needed. In that case, ill just go with what u suggested. Again, thank you. Keep up the good work and stay healthy! ( done sub 😆😆😆 )
Hello @SebaCioc, yes you can use the old cables of the old esc that way the instalation is much faster👍 i hope this answer your question and any other questions, feel free to ask me and i will try to do my best to answer it. Thank for your comment and for watching my videos👍
@@Markyx9642 in the Res v3 kit, you get a switch cable, batery cable, and a cable to solder to the motor, to the new 2nd gear motor, only if you have it. you can still use the original motor too, and you don't have to solder anything, only with the new 2nd gear motor. I didn't use the motor cable that came with the Res v3 kit because is too short, i use the original because is longer. All this cables are JST plugs on one end that connects to the Res v3 esc (mother board) directly, this are just extra cables, you don't have to use them, you can use the original cables that are already on your truck. For the lights you need to buy separate, servo plugs extensions because JST plugs are too big to connect next to each other, they do not fit on the pins of the Res v3 esc. I hope this helps. Let me know if this answers your question.
Yes the JST cable is for the 370 motor. Only if you buy the new one with 2nd gear, but is too short, i didnt use it in my truck, i use the original one that came with the truck because is longer.
Hola, buen video, tengo una pregunta, se puede usar el transmisor original? O al comprar ese receptor debe ser con el transmisor que sale en kit? Porque veo que son iguales los transmisores
👋 hola benjamincontreras160, no se puede. El transmisor tiene funciones extras que solo es conpatible con el recividor que viene en el kit. Lo que si es conpatible y se puede usar es el motor original con este Res v3 kit. Pero tendrias una velocidad solamente. Solo al conprar la nueva transmision, tendras la segunda velocida que con el nuevo control solo se puede activar. Espero que te aya ayudado , y gracias por ver mis videos👍
Hello No Name 😀 it will work with the original motor, It will not fry. The only difference is that you will not have a second geart to go faster and less torque to do rock climing. Also i don't know how good the drag brakes will work on the original motor. On the new motor, transmission it works great. I say use the original motor and test it out and if you don't like it you can always upgrade in the future👍
Nothing to worry 😀 you can switch the motor cables to be reverse, for example the positive make it ground and the ground make it positive only for the motor cables switch them around and nothing else, that should fix the problem. Let me know how it went and thank you for watching my video 👍
The servo is the stock one that comes with the truck. For the motor, here is the link to the 2nd gear transmission that comes with the motor. Is an affiliate link that helps support my channel at no cost to you, thank you and also for your comment and for watching my videos👍 where to buy 2 speed transmission: www.wpl-rc.com/products/dual-speed-gearbox?ref=MILTONME
Hello Noor Nabi Gaming 😃 yes you can use the old batery cable and on/off cable, they are just extra. You can also use the old batery, the difference is just that the new one is much stronger and will last longer than the old one. The old one you can still use, but the performance is going to be less and may struggle in extreme rock climing. I hope this helps and thank you for watching my videos👍 happy holidays😁
I just subscribed to your channel man. This is the most informative video I have ever seen! Thanks! Also I just purchased a C64-1 and the board has lots of ports on it now but I guess you have to have that new board for the sound right?
Thank you for your comment 😃 I am glad this video has help you in your Rc hobby and yes you need the new board for the sound, It’s worth it 👍 not too expensive and can be use in most Rc vehicles. Any other questions feel free to ask me and I will try to help you in your Rc adventure and thank you for subscribing.💪
Welcome aboard!
Glad I could help!
@@miltonrcadventure I really appreciate that! I love the hobby and have been into about a year and already have 6 🤦🏻😂
@@miltonrcadventure I ordered it today! Thank you so much for your help 👍🏻👍🏻
Great content..
Thank you😃
@@miltonrcadventure 🧨💯💯🔥💣
Where would I find the black connections that I need? And thanks for the great video!!!
Hi 👋 the servo plugs or servo connectors you can buy at Amazon website, here is my affiliate link at no extra cost to you: amzn.to/3XPc2z7
On the servo plug, connector you will need to remove or cut the white wire or leave it alone, is up to you. Just use the plug needed that fits the res-v3 receiver and the other end you can completely cut it off for future use on other project. I hope this helps and any other questions feel free to let me know know and thank you for watching my videos.😀
And here is one of my videos were I show the servo plugs, connectors connected to the res-v3 receiver.
Those are not resistors but capacitors.
Oops😳. Thank you All About Rc for pointing that out. I don't know how that slip out. 👍😃
Thank you! I’m making future plans based on this!
Hello Harry Prasetyo😃 you are welcome and i am glad this video inspire you in a positive way. Thank you for your comment👍 and for watching my videos.
Is it necessary to buy the 2 gear transmission to fit the sound system or can you fit just the sound system only?
Hello Aishutty's world 😃 it is not necessary to buy the 2 gear transmission to fit the sound system. The truck is still going to run, except instead of 2 gears just in one gear all the time and the torque is going to be a little bit less with the stock motor. Other than that, the truck runs just fine without the 2 gear transmission and you will have the sound system. You can always upgrade in the future if you like. I hope this helps and thank you for your question and for watching my videos👍
Solicito ayuda: no funciona mi Wpl res V3 seguí tu video y no sé cómo buscar la falla
Hola carlos😀 que es lo que ase ahorita? Si seconecta el control con el recividor? La luz verde tiene que estar prendida solida en el control y en la troca las de enfrente. Si estan prendidas solidas?
@@miltonrcadventure gracias milton. Después escribo mas, estoy de viaje
@@carlotorre7632 muy vien👍 disfruta el viaje😀
@@miltonrcadventure Hola, gracias ya de regreso. Cual debe ser la especificacion de la bateria?
Great video! Quick question, can i use this v3 soundboard with a 3300kv brushless motor? Thanks in advance!
Hi, @jNeoGaming, i would not recommend it because the higher kv, for example 3300kv is too fast for crawling and the torque is not there. The lower the kv, the more torque you get and for this rc trucks you need torque to climb those rocks or obstacles. So it may work if you connect the res v3, what i mean is that the motor may turned but, no torque power. I have on my truck the wpl 2 speed transmission with a 370 motor and it works great in my opinion. I hope this helps and thank you for watching my videos and your comment👍
@@miltonrcadventure wow thank you for the long reply! Your explaination is what i needed. In that case, ill just go with what u suggested. Again, thank you. Keep up the good work and stay healthy! ( done sub 😆😆😆 )
Good job 👍
Thank you Sumatera RC😃
instead of taking the new cables can I also put the ones that were in the old esc and put them in the new v3? Thanks
Hello @SebaCioc, yes you can use the old cables of the old esc that way the instalation is much faster👍 i hope this answer your question and any other questions, feel free to ask me and i will try to do my best to answer it. Thank for your comment and for watching my videos👍
@@miltonrcadventure thanks. But how many
mm is the jst cable for the 370 motor to put in the esc ? Or there is the cable in the res v3 pack?
@@Markyx9642 in the Res v3 kit, you get a switch cable, batery cable, and a cable to solder to the motor, to the new 2nd gear motor, only if you have it. you can still use the original motor too, and you don't have to solder anything, only with the new 2nd gear motor. I didn't use the motor cable that came with the Res v3 kit because is too short, i use the original because is longer. All this cables are JST plugs on one end that connects to the Res v3 esc (mother board) directly, this are just extra cables, you don't have to use them, you can use the original cables that are already on your truck. For the lights you need to buy separate, servo plugs extensions because JST plugs are too big to connect next to each other, they do not fit on the pins of the Res v3 esc. I hope this helps. Let me know if this answers your question.
Yes the JST cable is for the 370 motor. Only if you buy the new one with 2nd gear, but is too short, i didnt use it in my truck, i use the original one that came with the truck because is longer.
Here is my other video explaining how to connect the lights, check it ou and thank you👍 th-cam.com/video/TiIHRNnnl9s/w-d-xo.html
Cool video 😎
Thank you😃
Hola, buen video, tengo una
pregunta, se puede usar el transmisor original?
O al comprar ese receptor debe ser con el transmisor que sale en kit?
Porque veo que son iguales los transmisores
👋 hola benjamincontreras160, no se puede. El transmisor tiene funciones extras que solo es conpatible con el recividor que viene en el kit. Lo que si es conpatible y se puede usar es el motor original con este Res v3 kit. Pero tendrias una velocidad solamente. Solo al conprar la nueva transmision, tendras la segunda velocida que con el nuevo control solo se puede activar. Espero que te aya ayudado , y gracias por ver mis videos👍
will it work with that original 130motor? or it will be fry
Hello No Name 😀 it will work with the original motor, It will not fry. The only difference is that you will not have a second geart to go faster and less torque to do rock climing. Also i don't know how good the drag brakes will work on the original motor. On the new motor, transmission it works great. I say use the original motor and test it out and if you don't like it you can always upgrade in the future👍
Just got my sound kit and everything today and just set it up and now the throttle is backwards
Nothing to worry 😀 you can switch the motor cables to be reverse, for example the positive make it ground and the ground make it positive only for the motor cables switch them around and nothing else, that should fix the problem. Let me know how it went and thank you for watching my video 👍
@@miltonrcadventure and another thing is after i did that it doesnt wanna stay connected to the controllerand like 20-30 seconds
@@ohdeefy3352my winch is not coming out but only going in 😢 how to fix 🙏🏻
what motor/servo to use together with this V3 remote?
The servo is the stock one that comes with the truck. For the motor, here is the link to the 2nd gear transmission that comes with the motor. Is an affiliate link that helps support my channel at no cost to you, thank you and also for your comment and for watching my videos👍
where to buy 2 speed transmission:
www.wpl-rc.com/products/dual-speed-gearbox?ref=MILTONME
👍
Thank you😃
The problem is how do you get it all fit in there
Yes tight fit, i am making videos on how to get it in there. Hopefully everything will fit. Thank you for your comment and for watching my videos😃
hold the button about 3 second and the light off
😣😃Awsome! Man, thanks for your comment and for letting me know👍
@@miltonrcadventure welcomee😊👍
It is a servo not a server 😉
Oops😁 i have to work on my inglish😃 thank you for your comment and for watching my videos👍
Jazz lie dot 😂
Just like that is what i meant 😂 thanks for watching my videos.
why cant i use the old battery cable and on/off cables?
Hello Noor Nabi Gaming 😃 yes you can use the old batery cable and on/off cable, they are just extra. You can also use the old batery, the difference is just that the new one is much stronger and will last longer than the old one. The old one you can still use, but the performance is going to be less and may struggle in extreme rock climing. I hope this helps and thank you for watching my videos👍 happy holidays😁
Don’t like all the noise from the wrappers
😁 maybe i can make some improvements on my future videos😃 thank you for watching my videos👍