Part 2 Chevy Sonic prep & painting parts with Amazon Paint booth salvage rebuild.

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ต.ค. 2024
  • Part 2 Chevy Sonic Preping & Painting parts with cheap Amazon paint booth

ความคิดเห็น • 9

  • @lost_highway_guy
    @lost_highway_guy 10 วันที่ผ่านมา +1

    You do amazing work

    • @sinkorswimgarage
      @sinkorswimgarage  10 วันที่ผ่านมา

      Thank you. I greatly appreciate that

    • @lost_highway_guy
      @lost_highway_guy 9 วันที่ผ่านมา

      @@sinkorswimgarage do you have any videos, about repainting the engine compartment?
      I'm thinking about purchasing an 05 mustang, as a gift for my sister.
      But I want to change the color. I'd definitely need to pay someone to do it (I don't have that kind of skill)
      But Id like to save some money by painting, door jams, inside the truck and the engine compartment) myself. But the engine is in the car and I'm not able to remove it, to paint
      Any advice would be greatly appreciated

    • @sinkorswimgarage
      @sinkorswimgarage  9 วันที่ผ่านมา

      @lost_highway_guy No, I haven't done any engine compartment builds in a long time. But you need to get a small paint gun from Harbor Freight and turn the air pressure down low and just take your time. Might have to unbolt a few things, but it's easy. Make sure you buy some 600 wet sand paper a clean everything good you'll do just fine.

  • @TamasKish-h4q
    @TamasKish-h4q 3 หลายเดือนก่อน +1

    What would of been funny if the power went out and the booth deflated on a freshly painted car.

    • @sinkorswimgarage
      @sinkorswimgarage  3 หลายเดือนก่อน

      Don't think that would have been funny for anyone. But you do raise a valid point. Maybe a generator, if available, would be ideal. Thanks for watching

  • @wyattoneable
    @wyattoneable 3 หลายเดือนก่อน +1

    I'm considering the purchase of a paint booth so I though I'd stop by to see how it worked. Thanks!

    • @sinkorswimgarage
      @sinkorswimgarage  3 หลายเดือนก่อน

      My opinion it worked great. Just make sure you secure each tie down and adjust that fresh air inlet in the top of the wall. The only reason I had little dirt was because I kept going in and out due to 91 degrees that day. Part 3 I'll be painting the hood using the booth again, so I'll try to show better footage. Thanks for watching

    • @wyattoneable
      @wyattoneable 3 หลายเดือนก่อน

      @@sinkorswimgarage Thanks for the feedback.