Casting Cosmic Pearl Pen Blanks - Polyester Resin Casting for Lathe Turned Pen Blanks
ฝัง
- เผยแพร่เมื่อ 1 เม.ย. 2021
- In this video I walk through the process and materials needed to cast cosmic pearl pen blanks with polyester resin.
Check out my eBay listings here:
www.ebay.com/sch/frickwerkz/m...
Links below to all products used in my videos and other equipment suggestions:
Pen Blank Mold - amzn.to/2qX2g2B
Gallon Polyester Resin - amzn.to/35J4Ub1
Castin' Craft Polyester Resin - amzn.to/2OyGF9z
Castin' Craft Large Size Polyester Resin - amzn.to/33ABGcK
Pearl-Ex 32 Color Mica Powder Set - amzn.to/2OyZg5F
Pearl-Ex series 8 Color Mica Powder Set - amzn.to/2R15dts
Mold Release Spray for polyester resin - amzn.to/2Y0SFEb
Mold Release Spray for Alumilite - amzn.to/2L6j8uq
Micro Mesh Pads - Plastic Polishing - amzn.to/2Ozbw67
Turntable for Mixing Pour - amzn.to/2r1bZoq
Alumilite Resin 13 Dye Set - amzn.to/33w7tLZ
Alumilite Resin 10 Dye Set - amzn.to/2Ox85fY
Alumilite Resin 32 oz. - amzn.to/2OvGbBd
Beginner WEN Mini Lathe - amzn.to/33udokF
Easy Wood Tools Small Set - amzn.to/2q2uXus
Easy Wood Tools Full Size Set - amzn.to/2Duttwf
Easy Wood Tools Negative Rake Blades - amzn.to/33yfDDN
Barracuda Lathe Chuck Set - amzn.to/2OyHG1n
Popsicle Sticks for stirring - amzn.to/2RaimQW
Vinyl Gloves - amzn.to/34C0O48
Paper Mixing Cups - amzn.to/2swlMDB
5 minute epoxy - amzn.to/2OyD5fS - แนวปฏิบัติและการใช้ชีวิต
I've been trying to get that abalone thing going as well without much luck. Still trying to get a more defined black streak in there
lokalla well done Kilio...
nice work. very nice pieces Thank you for sharing.
Glad you enjoyed, thanks for the kind words.
I noticed you didn't put them in a pressure pot during the curing process. Does polyester resin not produce lots of bubbles like epoxy resin?
It does not capture them in the resin the way epoxy and urethane resins do, it heats up and leaves space for the air to escape before fully cured on these smaller blanks, it I were making a much larger blank I would want to put it in a pressure pot as it would heat up even more and cure faster in a large volume.
What is the temperature of the room that they’re curing in and how long does the curing take?
What if it droped , broke or can bear ?
This resin is fairly brittle, a hard smack can shatter this like glass but it would mainly be a worry for larger more solid pieces of the plastic, on a pen it is not a very big concern due to the light weight.