Thank you so much for this video Karl, you are amazing! I had a 1 year used DC 50 sitting around for the past 5 years (I'm a single mom of 3) because everything worked, but no suction and it was virtually brand new. It killed me to throw it out because I knew it had to be an easy fix. Years ago, I watched countless you tube videos, took it apart, cleaned it out and nothing. Today, I decided to try to resurrect it and immediately came across your video...my "secret filter compartment" overly was packed like yours with all kinds of things! Thank you, thank you, thank you. My Dyson is now running amazing and back to work!
Dude I was on my way to Dyson repair when I saw your video. I went home instead watched your video and it is now good as new. These vacuums are e pensive as hell and as well to fix them. I saved about 125 dollars Thanks Man U R the real deal. 🎉
I hate this model.. I've had so many issues in the past thinking i fixed it only to have it break a few tries later. I completely dismantled it thanks to your video. Found a massive clog in the filter and the bottom hose. Was able to fix it and it operates like new. Thanks a bunch!
all i can say is thank you SO MUCH. I was having the worst day and felt like a failure. Fixing the hoover has genuinely changed my mood. And it was satisfying pulling out the blockages... cheers!
Mate, you've just saved me the cost of a new one. The blockage wasn't in the same place as yours, but just seeing what parts can be removed and cleared is a lifesaver.
Great. Had already taken it all apart, no blockages but your video made me think of the seals. The one that switches between vac and tube was a little out of place, pushed back into place and all other seals checked and it is working fine again. Cheers!
This helped me clean up a vacuum that I got for free and now it works pretty much just as new!!! thank you so much for taking the time to film, edit, and post this video. It really made my day being able to fix the vacuum and have it work well!
Thank you. Visiting my elderly parents for Fathers Day and our Huskie dog shed fur all over their carpet and their Dyson dc50 wasn’t sucking on top or bottom and it turned out that it had the same clog. Thanks for saving the day!
I had the identical problem but a different model. I followed step by step. Amazing I fixed it thanks to you're video. Saved me the cost of a repair. Thank you thank you
Four years later your video is still a great insight in how to take a Dyson apart. Having just watched it, I was able to fix ours and saved having to take it to the repair shop. Thanks mate. 👍🙂
@KarlFixes I'm going to be fixing my 88 year old second cousins so I'll keep this video. Not sure what's wrong but I may be asking you, lol. Thanks for the video
Thank you so much! My Dyson was doing the same and I couldn’t figure out how to take it apart. This video was so helpful and now my Dyson is back to normal 😁
Ladies and Gentlemen Thanks to this video my dyson works great now! My Dyson was working but only the hose part. I cleaned all the filters, brush and so on. My Dyson still was only sucking through the hose part. So I knew it had to be a problem between the brush part and sucking. At the back where the hose hooks to the ball part, little red thing holding the hose on, i slid that out and low and behold that's where the clog was. It was a water bottle cap! Yes something so stupid, but simple to fix. I finally got it out, and got all the clog it was holding behind it, and it works great now!
THIS WORKED! I was able to get my Dyson to work. For me, I used baking soda when cleaning. It was clogged under the color piece in the main collector area/jug. There is a tab near the red part on the juggy thing where you can open it up and clean out. In this video it's at 7:36. I found a cotton ball cleaned the gray filtery area as I had both dander and baking soda fully clogged there. Baking soda is a no-no and now I will listen to that!
Thank you so much for your brilliant video. I was ready to take my vacuum back to Costco and get it exchanged. After watching your video, I thought let me try one more time. I opened the garbage part and checked it again. Once I clicked it back and put vacuum on suction was back. Thank you 🙂
In using the vacuum the past few weeks i could just tell something was off. It was working but not optimally. This video helped me decipher the problem - clog in the back elbow joint - and get it working. Thanks for putting this out into the world to help fools like me! Thank you!
Thank you soooooo much. Mine was making the same noise and lack of suction through base -head. You helped by showing how to get into the curvey part behind the head and low and behold, a half a cup of packed hair blocking it up - thanks to two long-curley headed daughters : ) I also found another filter I didn't know was there. Thanks Karl !!
Thank you for giving me the courage to dismantle and probe what the problem was. My problem was the same as yours. The dust canister was completely blocked by dirt and stuff packed into that hole. I used a needle nose pliers to get all the sections cleared and it works fine! Thanks again, love!
Thanks. I didn't know about this filter part either. I'd cleaned the other filters several times, but not that one. After watching this video, I opened it up and it had a solid layer of dust so thick that I couldn't see the mesh underneath! I cleared it out and it now seems twice as powerful, especially the hand held/hose part. (and it fixed my issue with a change in tone/loss of suction)
I really hated putting this together when it was gifted to me and for the amount of cash these things cost they shouldn't clog up like this after a short amount of use. This was very helpful and I'm going to tackle mine now.
Yes, yes! You're so right on point. There's little doubt that the Dyson cleans well, but the collection chamber/bin is a farce. I don't recommend these if you have a shedding pet unless you have the stomach and/or patience to field strip it and reassemble every odd month. I also recommend a decent supply of chopsticks kept on hand for fishing out the hair at the upper top of the collection chamber at each dumping. Also, the Dyson brush roller seems to not last as in loosing bristles quickly, more importantly the dual brush roller with the hardwood/lino soft bristles which disappear. The DC50 and others has the washable cone upper filter which is such a bugger to clean, but I figured out the best and perhaps only method is to pop off the top portion clip to roll the filter in backwards to expose the inside which holds a lot of crud! A lot of rinsing and using a plastic dental pick to pick out the crud collection at the bottom. This is a piss-poor design in my opinion. My last gripe is that the Dyson is super loud. Oh, I'm sure everyone hates the wand hose too... when you finish fighting to stretch it out longer before toppling over the vac, the less suction you shall receive. haha I still have my DC51 Pet (these are not for shedding pets!), but rightfully retired it for a Hoover (Air Steerable) - which is a lovely beast of a machine and the filters are so simple to rinse! I'd leave the DC51 by the side of the road, but it's worth too much to simply giveaway and why not get a few bucks back on a bad investment anyways? It's a designer vacuum in essence, as in shoddy workmanship and the like, but you pay dearly for the name printed on it. ;-P
Hey Karl. Thanks for this video. I have a newer and different model to yours. I was able to disassemble it using your video and now the vacuum is up and running again. Back in business. Cheers.👍👍
Karl, thanks for your video, I had a DC41 with the same issue, your disassembly instructions help me remove one side of the ball cover and filter, and allowed me to spot the cause of my Vac's issue; a pen stuck in the L bend of the upright hose near the ball which prevented the rubber seals engaging properly when the vac was put into floor mode. Removed the pen and the Vac is working normally with full suction. Cheers.
Great stuff, thanks! For me on my DC40 it was the little flexible tube between the brush head and the base itself, so at the front of the cleaner unit, yours was clear at 4:30 but mine was absolutely clogged solid with fluff and dreaded Christmas tree needles, unblocked it and I'm a very happy chappy. Wooohooo!!!!!
I watched the first 3 min. of the video and was able to correct my issue. I found my blockage in a place I didn't know to check, but your video helped me to spot it. Thank you so much!!! Is there a place where we can donate to you/your channel??? You saved me the money of hiring a repairman.
I don't have donations turned on at the minute maybe something i should do in the future, Thanks for the offer and buy yourself a drink with the money you saved instead
When I was a child my father always told me I was mechanically inclined. This dyson was the test! It had stopped sucking completely and I could see all the hair wound around the roller, but had no clue about the dust (I live in mid-town Manhattan) stuffed inside the head -- even though I'd cleaned it thoroughly (or so I thought) after someone gave it to me as a hand-me-down. Should work beautifully now. Fingers crossed!
C'mon Claire, did it work ? I find it bizarre that anyone would try to rectify a problem and then not bother to see if it is actually fixed before making a comment about it on TH-cam. Or is that a mid-town Manhattan thing ? The medium is stronger than the message, perhaps.
So well done! Was going to pitch my DC50, then found your tutorial. As other comments have mentioned, plz clear the filter, often. Tanks Fella, you’re a real gent
I tried to help my boyfriend with his vacuum cleaner or with things in general so that he could fix them, but he always leaves it to the last minute, and I always remind him and he just tells me "you are a very difficult woman" and from then on I prefer to do it myself.😢
I appreciate the full breakdown. Through following your video I was able to see what all the arrows mean and could troubleshoot my own issue. Saving this video for next time.
Brother,I wanna thank you so so so much,for taking time out of your day. And making this video ! My Dyson ball was shutting off n lost suction b and I was considering,buying a new vacuum cleaner. Your step by instructional video. Helped clear out the clogs ! And saved me money ! I absolutely love my Dyson ball ! And I’m so glad ,I was able to fix it with your help ! Thank u so much ! GOD bless you and your family ! And I hope u have a awesome new year !!
Hi , this video is very helpful and I have added it to my list of reminders. Such a clear fuss free breakdown of where the trouble could be with the hoover. I am completely not mechanically minded, but it felt so easy to take the hoover parts apart , and put it back together with your clear instructions Thank you!
Thank you for doing this video. Helped me fixed my Dyson. In my case , the problem was just as yours. Cleaned the dust container and it worked just as before.
Thank you so much for this video! I was able to successfully get my Dyson working again, and saved a fair amount of money buying a new one 👏👏 Thanks again 👍
Thank you so much! you just saved me from spending extra money that I can use for something more important then getting this fixed or buying another one. Thanks again and God Bless
Thank you for the super helpful video!!!! I was able to follow your instructions fluidly and was able to fix my 1 year old animal ball. Thank you thank you!!!!
Karl, Thank you for this excellent Dyson Vac repair/service video. Did everything you covered including replacing the two filters. Lots of clogs in different areas. Cleaned a lot of surfaces. Keep up the good work!
Thank you!! I don’t have the same model, but this video gave me the know how to be able to get inside and check all the hoses. Sure enough the bottom of the external hose was clogged. Thanks mate!
This really helped me. I had a wicker basket twig thing stuck in the main body of my machine. If it wasn’t for this video id be paying someone to fix it. Thanks.
Excellent and instructive, and saved me buying a new vacuum cleaner! Key point was showing me how to disassemble each part seeking the problem. In the end I had to also remove - only a simple screw - a transparent tube that connects at the front where I found a 'lump' of hair, dust, assorted debris blocking the suction. And, the best bit, I was able to reassemble the DC50 first time. Now working a dream :-)
Do not forget to wash the container filter. This is most likely the purple-colored disc right in the center of the gold-colored cyclone pattern crown on the dust bin. At least on my model that is the case.
Thank you so much for this video Karl, you are amazing! I had a 1 year used DC 50 sitting around for the past 5 years (I'm a single mom of 3) because everything worked, but no suction and it was virtually brand new. It killed me to throw it out because I knew it had to be an easy fix. Years ago, I watched countless you tube videos, took it apart, cleaned it out and nothing. Today, I decided to try to resurrect it and immediately came across your video...my "secret filter compartment" overly was packed like yours with all kinds of things! Thank you, thank you, thank you. My Dyson is now running amazing and back to work!
Glad it helped you out
Dude I was on my way to Dyson repair when I saw your video. I went home instead watched your video and it is now good as new. These vacuums are e pensive as hell and as well to fix them. I saved about 125 dollars Thanks Man U R the real deal. 🎉
Glad it saved you all that money that's why I post these videos
$125???? Mine cost $400!!!
I hate this model.. I've had so many issues in the past thinking i fixed it only to have it break a few tries later. I completely dismantled it thanks to your video. Found a massive clog in the filter and the bottom hose. Was able to fix it and it operates like new. Thanks a bunch!
i have to agree i have repaired and unblocked mine so many times that's why i made this video to help others
all i can say is thank you SO MUCH. I was having the worst day and felt like a failure. Fixing the hoover has genuinely changed my mood. And it was satisfying pulling out the blockages... cheers!
Mate, you've just saved me the cost of a new one. The blockage wasn't in the same place as yours, but just seeing what parts can be removed and cleared is a lifesaver.
Bought one of these second hand, got it home and it didn’t work. Your video single handedly saved the purchase, thank you!!
Great. Had already taken it all apart, no blockages but your video made me think of the seals. The one that switches between vac and tube was a little out of place, pushed back into place and all other seals checked and it is working fine again. Cheers!
This helped me clean up a vacuum that I got for free and now it works pretty much just as new!!! thank you so much for taking the time to film, edit, and post this video. It really made my day being able to fix the vacuum and have it work well!
Glad I could help!
Howdy, my wife was about to go get a new vacuum cleaner. Thanks to your video I was able to fix ours and it now works better than ever. Thanks Mate!!!
Glad I could help
This is the second time I've watched this video and it fixed my $500 vacuum both times. Thank you!!
I never found a blockage, but through these instructions and cleaning, my Dyson started working again. Thank you!
Great to hear!
Thank you. Visiting my elderly parents for Fathers Day and our Huskie dog shed fur all over their carpet and their Dyson dc50 wasn’t sucking on top or bottom and it turned out that it had the same clog. Thanks for saving the day!
I had the identical problem but a different model. I followed step by step. Amazing I fixed it thanks to you're video. Saved me the cost of a repair. Thank you thank you
You're welcome!
Four years later your video is still a great insight in how to take a Dyson apart. Having just watched it, I was able to fix ours and saved having to take it to the repair shop. Thanks mate. 👍🙂
No problem mate happy it helps
@KarlFixes I'm going to be fixing my 88 year old second cousins so I'll keep this video. Not sure what's wrong but I may be asking you, lol. Thanks for the video
Thank you so much! My Dyson was doing the same and I couldn’t figure out how to take it apart.
This video was so helpful and now my Dyson is back to normal 😁
within 2 minutes I found a kids pencil stuck in the base of the hose attachment and my dyson is working great again! many thanks 😊
Ladies and Gentlemen
Thanks to this video my dyson works great now!
My Dyson was working but only the hose part. I cleaned all the filters, brush
and so on. My Dyson still was only sucking through the hose part.
So I knew it had to be a problem between the brush part and sucking.
At the back where the hose hooks to the ball part, little red thing holding the hose on, i slid that out and low and behold that's where the clog was.
It was a water bottle cap! Yes something so stupid, but simple to fix.
I finally got it out, and got all the clog it was holding behind it, and it works great now!
Great to hear you fixed it
THIS WORKED! I was able to get my Dyson to work. For me, I used baking soda when cleaning. It was clogged under the color piece in the main collector area/jug. There is a tab near the red part on the juggy thing where you can open it up and clean out. In this video it's at 7:36. I found a cotton ball cleaned the gray filtery area as I had both dander and baking soda fully clogged there. Baking soda is a no-no and now I will listen to that!
Excellent!
I've been going without a vacuum for months because I had no idea where to take it to get fixed. This video absolutely saved the day! Thank you.
Great to hear!
So grateful for the demo. I am the worlds worst man, I don't know how to fix anything.
Mate my husband owns that title.
I almost bought another Dyson. You saved my life. Thanks man!
Thank you so much for your brilliant video. I was ready to take my vacuum back to Costco and get it exchanged. After watching your video, I thought let me try one more time. I opened the garbage part and checked it again. Once I clicked it back and put vacuum on suction was back. Thank you 🙂
I love that you vacuumed the kitchen table when you were done. Like it never happened!
In using the vacuum the past few weeks i could just tell something was off. It was working but not optimally. This video helped me decipher the problem - clog in the back elbow joint - and get it working. Thanks for putting this out into the world to help fools like me! Thank you!
Thank you soooooo much. Mine was making the same noise and lack of suction through base -head. You helped by showing how to get into the curvey part behind the head and low and behold, a half a cup of packed hair blocking it up - thanks to two long-curley headed daughters : ) I also found another filter I didn't know was there. Thanks Karl !!
Thanks glad to help out
@@KarlFixes you're so helpful and saved me a decent amount of money, do you have a Pattern?
@@KarlFixes *Patreon* (@$* auto correct)
Your video fixed my issue after watching 15 other videos that were useless. Thank you! Liked, Subscribed, Comment.
Thank you for giving me the courage to dismantle and probe what the problem was. My problem was the same as yours. The dust canister was completely blocked by dirt and stuff packed into that hole. I used a needle nose pliers to get all the sections cleared and it works fine! Thanks again, love!
Glad I could help!
Like the others commenting below - you saved me a trip to the repairers. It was the blockage at that point that fixed it for me as well.
Thanks. I didn't know about this filter part either. I'd cleaned the other filters several times, but not that one. After watching this video, I opened it up and it had a solid layer of dust so thick that I couldn't see the mesh underneath! I cleared it out and it now seems twice as powerful, especially the hand held/hose part. (and it fixed my issue with a change in tone/loss of suction)
I really hated putting this together when it was gifted to me and for the amount of cash these things cost they shouldn't clog up like this after a short amount of use. This was very helpful and I'm going to tackle mine now.
Yes, yes! You're so right on point. There's little doubt that the Dyson cleans well, but the collection chamber/bin is a farce. I don't recommend these if you have a shedding pet unless you have the stomach and/or patience to field strip it and reassemble every odd month. I also recommend a decent supply of chopsticks kept on hand for fishing out the hair at the upper top of the collection chamber at each dumping.
Also, the Dyson brush roller seems to not last as in loosing bristles quickly, more importantly the dual brush roller with the hardwood/lino soft bristles which disappear. The DC50 and others has the washable cone upper filter which is such a bugger to clean, but I figured out the best and perhaps only method is to pop off the top portion clip to roll the filter in backwards to expose the inside which holds a lot of crud! A lot of rinsing and using a plastic dental pick to pick out the crud collection at the bottom. This is a piss-poor design in my opinion. My last gripe is that the Dyson is super loud. Oh, I'm sure everyone hates the wand hose too... when you finish fighting to stretch it out longer before toppling over the vac, the less suction you shall receive. haha
I still have my DC51 Pet (these are not for shedding pets!), but rightfully retired it for a Hoover (Air Steerable) - which is a lovely beast of a machine and the filters are so simple to rinse! I'd leave the DC51 by the side of the road, but it's worth too much to simply giveaway and why not get a few bucks back on a bad investment anyways? It's a designer vacuum in essence, as in shoddy workmanship and the like, but you pay dearly for the name printed on it. ;-P
Hey Karl. Thanks for this video. I have a newer and different model to yours. I was able to disassemble it using your video and now the vacuum is up and running again. Back in business. Cheers.👍👍
Nice work!
Karl, thanks for your video, I had a DC41 with the same issue, your disassembly instructions help me remove one side of the ball cover and filter, and allowed me to spot the cause of my Vac's issue; a pen stuck in the L bend of the upright hose near the ball which prevented the rubber seals engaging properly when the vac was put into floor mode. Removed the pen and the Vac is working normally with full suction. Cheers.
So glad I could help its why I put these videos up
Absolutely brilliant I couldn't work out why it wasn't sucking up until you showed me how to remove bottom hose saved me buying a new vacuum
Great stuff, thanks! For me on my DC40 it was the little flexible tube between the brush head and the base itself, so at the front of the cleaner unit, yours was clear at 4:30 but mine was absolutely clogged solid with fluff and dreaded Christmas tree needles, unblocked it and I'm a very happy chappy. Wooohooo!!!!!
yes thats a very commen place for blockages in the head to the main unit
Wow...thank you!!!! You described the issue just as I had -- NOISE and no suction -- and thanks to you, I ultimately solved it. Very gratifying!
Thank you very much for making this video, I bought my Dyson second hand and it stopped working after a while, thanks to your video it's now fixed!
Wow, you just saved me from buying a new vacuum. My Dyson had the same issue as yours. Much appreciated.
No problem
You saved my money Mate, tried your process and issued resolved.🎉
Thank you so much for this excellent tutorial. I was able to take it apart and fix it myself as my spouse looked amazed!
I watched the first 3 min. of the video and was able to correct my issue. I found my blockage in a place I didn't know to check, but your video helped me to spot it. Thank you so much!!! Is there a place where we can donate to you/your channel??? You saved me the money of hiring a repairman.
I don't have donations turned on at the minute maybe something i should do in the future, Thanks for the offer and buy yourself a drink with the money you saved instead
When I was a child my father always told me I was mechanically inclined. This dyson was the test! It had stopped sucking completely and I could see all the hair wound around the roller, but had no clue about the dust (I live in mid-town Manhattan) stuffed inside the head -- even though I'd cleaned it thoroughly (or so I thought) after someone gave it to me as a hand-me-down. Should work beautifully now. Fingers crossed!
C'mon Claire, did it work ?
I find it bizarre that anyone would try to rectify a problem and then not bother to see if it is actually fixed before making a comment about it on TH-cam.
Or is that a mid-town Manhattan thing ? The medium is stronger than the message, perhaps.
So well done! Was going to pitch my DC50, then found your tutorial. As other comments have mentioned, plz clear the filter, often. Tanks Fella, you’re a real gent
Big thanks Karl, your 2019 video of the dc50 is spot on, cheers Paul
Many thanks!
Helped this independent woman continue to not need no man… except the one in the TH-cam video! Thanks for your help!
I've learned how to do a lot of things for the very same reason!
Only needed a man for his video tho
Yet you had to rely on a man to show you how to do it. Irony impairment at its finest. Nice use of casual sexism.
I tried to help my boyfriend with his vacuum cleaner or with things in general so that he could fix them, but he always leaves it to the last minute, and I always remind him and he just tells me "you are a very difficult woman" and from then on I prefer to do it myself.😢
I appreciate the full breakdown. Through following your video I was able to see what all the arrows mean and could troubleshoot my own issue. Saving this video for next time.
Glad it helped
Thanks, this helped me out! Hose was detached from the brush piece. I was ready to toss it out.
Brother,I wanna thank you so so so much,for taking time out of your day. And making this video !
My Dyson ball was shutting off n lost suction b and I was considering,buying a new vacuum cleaner.
Your step by instructional video. Helped clear out the clogs ! And saved me money ! I absolutely love my Dyson ball ! And I’m so glad ,I was able to fix it with your help !
Thank u so much ! GOD bless you and your family ! And I hope u have a awesome new year !!
No problem glad I could help
Just came across your video and sure enough, this is exactly what was wrong with ours. Thanks! 🍻
Great to hear!
Hi , this video is very helpful and I have added it to my list of reminders. Such a clear fuss free breakdown of where the trouble could be with the hoover. I am completely not mechanically minded, but it felt so easy to take the hoover parts apart , and put it back together with your clear instructions
Thank you!
Glad it was helpful!
Thank you soooo much, you prevented us from having to buy a new one!
Great to hear!
Thank you for doing this video. Helped me fixed my Dyson. In my case , the problem was just as yours. Cleaned the dust container and it worked just as before.
Thank you SO much!! I was ready to take mine to the shop but had it working good as new after figuring out where the clog was, after watching you!
Thank you so much for this video! I was able to successfully get my Dyson working again, and saved a fair amount of money buying a new one 👏👏 Thanks again 👍
Thank you, sorted out my Light Ball Multi-Floor. I swear they don't make them like they used too, my old DC04 is still representing in the garage
Karl you just saved my bacon on a las vegas Friday morning. Thanks pal!
Thank you so much! you just saved me from spending extra money that I can use for something more important then getting this fixed or buying another one.
Thanks again and God Bless
Thank you for the super helpful video!!!! I was able to follow your instructions fluidly and was able to fix my 1 year old animal ball. Thank you thank you!!!!
Fantastic!
Not all heroes wear capes! This solved my problem. Thank you so much!!
I'll add my applause! Very helpful video. Successful cleaning here and my vacuum is likely good as new.
Thanks! Mine was simple to unclog once I found out the bottom rectangle could be removed!
Thank you for saving my family having to buy a new one!! Got it fixed now. Kind regards from Texas.
Karl, Thank you for this excellent Dyson Vac repair/service video. Did everything you covered including replacing the two filters. Lots of clogs in different areas. Cleaned a lot of surfaces. Keep up the good work!
Thank !
I pulled one out of the trash and cleaned it out and it works great.
Blessings!
Thanks for the walk-through! My 7-year old dyson ball is running like new.
Was thinking of chucking mine. Now back to full suction thanks to you! 🥳
Thank you! It turned out I had exactly the same blockage and this video enabled me fix my vacuum cleaner.
Thanks so much for sharing this. You've just saved me the cost of repair/buying new. You're a diamond! 💎
This is EXACTLY what was wrong with my vacuum, thanks for the video!
Thank you so much!!!! I e just fixed my Dyson!!! To say I’m chuffed is an understatement! Thanks again x
Thanks mate, I was able to get my dyson going again just like she was when new. Thanks for the tutorial!
I love the subtitle on your intro “or at least tries” ...
I wish your channel great success
Cheers mate
Mate, you're doing God's work. Thank you.
Thank you!! I don’t have the same model, but this video gave me the know how to be able to get inside and check all the hoses. Sure enough the bottom of the external hose was clogged. Thanks mate!
Good to hear the vid helped
This helped a lot! I fixed the problem by following the instructions. Thank you
You're welcome!
I have the red ball one & this worked like a charm. Thank you!!
You're welcome!
It works!!! Yay! It's like a new machine now. Thank you so much.
3 minutes in…fixed mine! Thanks!!
Glad I could help!
Thanks for the video ! I did everything except a thorough cleaning of the canister . It worked !
Thanks mate! The part at 3:10 solved my issue. Had a pen stuck there that was keeping the two parts from mating correctly. all good now!
you saved me £30 pounds
thank you
my hoover working.
Excellent!
This vacuum sucks! LITERALLY is the beast vacuum I’ve ever owned! Wow. Was really pleased with how well it works.
Excellent Thank you. Fixed my Dyson. Didn't have a clue. It was very helpful indeed. i am very grateful to you.
This was very helpful! Mine just had a huge hair clog and after removing that, it works like new.
Speak English.
You helped me get my vacuum cleaner working again! Thanks so much!
Brilliant thanks for this. Just had a go and it was all clogged up round a hair grip! All sorted now and working a treat !
You have also just saved me buying a new one 👌🏿
Thank you. I found a tear in one of my internal hoses.
Glad you were able to fix it
Thank you thank you thank you!!! I managed to fix my vacuume and learned so much about it too
Thank you so very much. You just saved me £££££!
Works like a dream now
Thank you for this video, I followed U 2 the end, BUT the brush head remains static. Do I need a new brush head?
This really helped me. I had a wicker basket twig thing stuck in the main body of my machine. If it wasn’t for this video id be paying someone to fix it. Thanks.
No problem here to help
Excellent and instructive, and saved me buying a new vacuum cleaner! Key point was showing me how to disassemble each part seeking the problem. In the end I had to also remove - only a simple screw - a transparent tube that connects at the front where I found a 'lump' of hair, dust, assorted debris blocking the suction. And, the best bit, I was able to reassemble the DC50 first time. Now working a dream :-)
Great to hear that
Fixed it!!!! Thanks for the vid!!
Greetings from Washington, DC!
I reckon you've saved the consumer around a millions quid! Dyson must be fuming 😂
I wish I had the million quid in my pocket to show for it 😂
You saved my life dude my family was convinced that I broke the vacuum
Haha great news
Thank you for helping me sort my hoover.
Happy to help!
This worked Fantastic!!!! thank you for publishing this video
Great vid. Saved me out laying £200 for new one 👍
Holy shit man I just took apart my Dyson and I had an incredible amount of dirt & debree stuck in the lines. It's like a new vacuum. Thank you!
Do not forget to wash the container filter. This is most likely the purple-colored disc right in the center of the gold-colored cyclone pattern crown on the dust bin. At least on my model that is the case.