วีดีโอ

Appreciate you making this video. Unfortunately, I have a Eufy Robovac 15C Max, and the disassembly was *much* more involved. Where you had a simple single screw to get at the roller brush motor, the 15C Max requires disassembling the whole vacuum body, including removing the circuit board and carefully disconnecting all wires from it, so that the blower and intake duct can be moved out of the way. And even after that, another 6 screws had to be dealt with before the housing that holds the motor can finally be separated and the motor assembly opened up for cleaning. Sadly, after figuring all of this out and cleaning out the modest amount of pet fur and such that was probably hampering the rolling of the brush, then reassembling it all, I _still_ got the four beeps with solid red light. So I've ordered a replacement motor from Eufy. Which they still sell, and for only a few dollars more than a no-name motor on Amazon! Kind of amazing, given the vacuum is almost four years old now, and the model is long-since discontinued. I don't know if this is the norm in the robotic vacuum industry, but it's really appreciated. Ironically, that means I get to do this disassembly yet again so that I can install the replacement, which apparently ships mounted in the large plastic housing and not just as a bare motor that could be swapped out. Maybe simpler in the end, but only barely.

Helped me fix my Problem, thank you!

My hi-fi is a 100% efficient heater.

Tried everything else but this is the only method that worked for me. Thank you very much.

Thank you!

I'd be inclined to use resin for this job as it dries very hard very quickly - the stuff that comes in cartridges that fit in a sealant gun and is delivered via a nozzle with a spiral in it that mixes the two parts

That's a great tip & technique. That's very much. I will have to try this now i know

The battery is new just replaced it a month ago, so why is it doing it now? The red indicator is steady so i am guessing there is a problem with rolling brush

Máy đẹp quá bạn ơi like nhé 🙏🥰

That looks beautiful, really youbdid such a great job. I have an oak table coming today that needs some attention and this video really helped thank you

Legend mate, been a struggle trying to find a windows 11 version - thank you

wow !! thanks. where can I buy this battery charger?

Gee whizz 🤦🏻‍♀️ I've been in the UK for the last 23 years and it's crazy how under prepared the homes here are for the freezing damp winters. I've never seen so much mould, it's practically in most homes. To think that people long ago actually lived like this without central heating. Things haven't changed much here. Unless you would like a large heating bill, you better budget well. I can't wait to get out of here to a sunnier place!! But I guess 3°C warmer is better than hypothermia. If you weren't wrapped up warm in that 10.5°C, and fell asleep in that, you'd get early onset hypothermia.

got it like a week ago thought it would be fine with the vibration turns out not... thanks for the tutorial you saved me from dying of stress kept the sound for pikachu singing me to sleep lol

Your multimeter is defective !!! It should be showing a "1" for infinate resistance with your leads not touching each other. You may just not have gotten the dial in the exact proper position.

No Links.

does this work for iphone?? mine is an iphone T.T

Spent 2 hours trying to remove the tire..watched about 5 videos before this and tried many different things and this was the only trick that worked. Thank you! 🎉

Where does the subwoofer connect to the TV or to the soundbar?

3 minutes in…fixed mine! Thanks!!

the fact this even needs to be done just screams incompetence on the part of niantic lmao how hard is it to just integrate a feature to turn off vibration for a device i'm just going to stow in my bag

I use hydrochloric acid to clean limescale. If you do try this way, please use correct PPE i.e respirator mask with correct filter for toxic gases. Sealed goggles as fumes from this can make contact with eyes and of course long rubber gloves.

The first wire you fixed, wasn’t that important it was only the tummy sensor. The Furby would still work without it because I know cause I fixed my Furby too, so it’s not that important but the battery

Thank you

This was a life saver!!! ❤

Cut the vibration wire now the whole thing is dead. Press the button and nothing happens, no lights or sounds

Thank you❤❤

This is why I never eat at the table when I visit Karl.....😱

Could not be done on my yesterday on my SLK Mercedes, access deep to the locking nut and no space for socket if was possible to remove spinning collar😢

What causes those that are permanently on and won’t charge during the sunny day even with clean solar panel?

Most honest and genuine review. Thank you, had fun watching your video. P/S: I suggest you clean the tip of the streaming wand after each use :)

Im going to retest tommorow as its been in my fluval U2 since Monday

I've put this in my U2 and after 3 days, still nitrates!

Karl is a genius !

Honestly this is the most helpful video I’ve seen so far 😂👌🏻

Ive just replaced the batteries but the lights are permanently on . Any ideas why. Ive since turned them off . According to the batteries i bought they are for solar lights

Great

The main problem with all these lights they were never intended to be used in a moist environment ie the English climate. All components are made of steel not brass as in the past and of course steel rusts in a moist environment. Therefore these will never last.

Hi! Thank you so much! I’ve watched so many of these videos, I’ve tried the supplied poker, I’ve tried a small pipecleaner brush, I’ve even re-levelled the fridge, looked at the back of the fridge… , and it was your video that said to use a cable tie that’s longer and to persevere a bit (!) that finally fixed the flooding! So I’m very grateful to you! Thanks so much!

Hilarious 😆, that was fun to watch. I just purchased the same machine. I’m just watching a bunch of videos to get familiar. Thanks mate! Cheers ☕️

You must try the round patio brush it’s fantastic. It’s like the window cleaner once you use it you won’t look back and I only use water

Absolute crap product, i have this soundbar, and it no longer responds to the remote. Contacted bomaker and tehy won't respond to emails or contact via their website. Will never buy from these wankers again

Commen is spelled common. Love these ideas!

Thanks for the video, looks pretty easy. Do you have to release the pressure somewhere so you don't get fuel spraying everywhere?

The first guide that came up in search and the one that answered my question. Luckily I already had the tools from some smartphone surgery a couples years ago lol.

great explanation. thank you.

Thank you!!! Bought an ifixit kit some time ago that now came to good use. My first project and it worked well thanks to you!

Only one thing i wanna know, is the elite smaller? My hands can't reach the bloody shoulder buttons nicely and faster enough for fifa

Life saver, thank you so much!!

Great job, Karl. Thanks for the advice.