Controlling the Bluguitar amp1 thru MIDI
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- In this video im gonna show how you can control your amp1 with midi.
Im using a Boss MS3 here, but this stuff works on all midicontrollers.
For more info on the amp1 : www.bluguitar.com/english/AMP...
For more infop on the Boss MS3 : www.boss.info/global/products...
#bluguitar #bluguitaramp1 #bossms3 - เพลง
I never could figure this out with the HX. Your explanation was more straight forward than other videos I have watched. Now it’s time to experiment. Thanks
Thx buddy!
Thank you for sharing!! It's helpful!! Great job!!
No problem, pls subscribe!
Very clear Eric, thank you :)
You are very welcome!
Got it done! Thanks! Great video :)
Glad i could help
Eric. Many thanks for this. I was confused with the role of cc20, I couldn't work out whether it was controlling gain or the master volume of the overdrive channels.
On the Boss MS3 I find if you turn the MIDI Clock Out option OFF in the main menu MIDI settings, then you can have your boost/reverb/powersoak/etc settings reserved and sent to the AMP1 on selection of a preset. Also, when in the MIDI edit mode pressing the on/off switch on the MS3 will transmit the change to the AMP1. Really helpful if you can't remember which CC number does what!
How I activate the power soak? Thank you.
I am trying to control the Amp1 silver ed with the Boss GX100 but control change isn't working .....also I have to tap twice when sending prg change. Anyone?
Make sure midi clock on the boss is off
@@DutchGuitarDude I already tried that but it made no difference
Hi, the issue at around 11:00 min. can be solved if you add a slight delay to the cc command. Using the hx stomp I found out that e.g. 100 ms delay is enough for the cc command to be recognized when the patch (pc) is switched together with the cc. Don’t know if it’s possible to delay the cc command on the ms-3 though.
No you cant delay the cc. But thats the problem yes. Too many cc at same time
@@DutchGuitarDude I also found out that other midi settings such as gain and power soak are saved when the amp1 is learning the program change number via midi (after holding the reverb button). I guess the learned settings have priority when recalling a preset via midi and simultaneously sent cc messages are ignored unless they are delayed.
Hello Eric! May I know what kind of midi cable do you use between Amp1 and ms-3?
Yes its the special midi adapter from bluguitar, with a very short midi cable to my ms3.
Do you use the Bluguitar Midi Cable or a Standard Midi Cable for the connection with Boss MS3 ??
2:35 Hi Eric, I noticed slight latency or gap when you're switching between channels. I wonder if that's from Amp1 or MS-3? Thank you!
I have to turn down volume when i speak. I do that afterwards in my video editor. That sometimes results in this way.
Hi sir I really appreciate your video but I have boss ES5 controller hopefully you can make tutorials of it,have a good day sir.
I don't have an ES5 sorry. But if I get one, I'll surely make some videos of it. Thx for watching and pls subscribe
hi my Amp 1 iridium does not communicate via midi with the ms3 pedal board, in fact when I do the "learning" procedure if I click the boss button, nothing happens, the plusante amp1 stops flashing after a few seconds by itself, in any case it does not work for me without a channel change or midi control change, I have the midi cable 1 and in addition I had to make the midi cable, which as I have seen from the midi 1 has only two cables ... can you solve?
Turn of midi clock on the ms3. Let me know if that works
@@DutchGuitarDude maybe I was able to get it to work, but the "learning" procedure doesn't work, even the channels don't match well, but it still works! changing the clok does not change anything, on the contrary, it eliminates a bit of hum, thanks
Come to our Facebook group for help
facebook.com/groups/342661916146241/?ref=share
@@DutchGuitarDude now nothing works anymore, as soon as I do the learnig I have to turn off the amp 1 and then I move the channel changes of a position or I invert them, u mess!
My friend, how do you know what CC controls what? I couldn't find any documents about it
It's in the manual.
@@DutchGuitarDude I found it. Thank you so much. Do you use a TRS cable?
@@the92project I use the special cable from bluguitar. Trs to midi
@@DutchGuitarDude I think I broke my amp1. Was trying to program and now the reverb wont blink after keeping boost pressed. I tried a reset of the unit and same thing ☹️
@@the92project are you in our Facebook group yet?
Hi, I did what you do in the video, but noting changes on amp 1.
Do you have boss ms3?
@@DutchGuitarDude Yes
Check if midi clock is off in menu of boss ms3
@@DutchGuitarDude Now on preset 1 on the ms3 I put pc1 and amp 1 goes to classic channel.
Come to our Facebook group for help