Which Adams Polishes Shampoo Should You Use

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ต.ค. 2024

ความคิดเห็น • 44

  • @dragger168
    @dragger168 2 ปีที่แล้ว +4

    Thanks for making this video! This video confirms that I’m not the only one getting runny foam consistency on both the car shampoo and the ultra foam shampoo. I thought there was something wrong with my pressure washer setup. Like you, I was disappointed on how runny the ultra foam shampoo is for a product that has “ultra foam” in its name. Only soap I had good foam is the mega foam.
    Liked and subscribed! Keep up the good work man.

    • @BringItMuscleCars
      @BringItMuscleCars  2 ปีที่แล้ว

      Thank you I really appreciate it. I just did a review on the new Maguires ultimate snow foam. I was shocked by it. It’s cheap and works great. You might want to check that out.

    • @MikeroWav3
      @MikeroWav3 ปีที่แล้ว

      The key is GPM. The higher the gpm, the more foam you get. That’s why some youtubers tend to have better foam. They tend to have nicer pressure washers for there businesses vs weekend warrior set ups.

  • @wlsnwilson
    @wlsnwilson 23 วันที่ผ่านมา

    Thanks for sharing, I have not used any of these soaps. This was insightful.

  • @bktdetail5220
    @bktdetail5220 2 ปีที่แล้ว +1

    I use the Car shampoo and i get results very close to your Mega foam results. What the heck would I get if I use Mega foam 😳
    But I currently use the K1322TS pressure washer and absolutely had no issues with Car shampoo. It foams very good. I'm looking at the Ultra and Mega shampoo , that's why I'm watching this video.

    • @anthony3953
      @anthony3953 2 ปีที่แล้ว +1

      It doesn’t matter what soap you use when your pressure washer is pushing 1.9 gpm. I have the same setup here but I get the same foam results from both products. Maybe mega foam by just a bit because it clings longer to the surface, but in the end, they kind of seem like the same product to me when running through the kranzle.

  • @jasoncaddell2479
    @jasoncaddell2479 3 หลายเดือนก่อน

    The ultra foam supposedly has a bit of a protectant in it as well. Not as much as the wash and wax of course, but that could be why it doesn't foam as much as expected.

  • @ft7234
    @ft7234 8 หลายเดือนก่อน

    Lovely comparison! I suggest you try sticky snowball. Very similar results to mega foam for less than the ultra foam shampoo.

    • @BringItMuscleCars
      @BringItMuscleCars  8 หลายเดือนก่อน

      I think I did a video on that when it came out. I started my own line. It’s called bring it garage. You might want to check it out.

  • @chiroguy98
    @chiroguy98 2 ปีที่แล้ว

    Great job! Nice to see the differences. Adam’s has great stuff.

    • @BringItMuscleCars
      @BringItMuscleCars  2 ปีที่แล้ว

      They really do. And I’m impressed that each soap is really a different product.

  • @troylong8489
    @troylong8489 7 หลายเดือนก่อน

    Great video. Can the Adam car shampoo be used as a pre wash soap?

    • @BringItMuscleCars
      @BringItMuscleCars  7 หลายเดือนก่อน +1

      None of them work great as a pre wash soap. They pull a little dirt of but work much better with a wash mitt.

    • @troylong8489
      @troylong8489 7 หลายเดือนก่อน

      @@BringItMuscleCars what would you recommend to be used as a pre-washed soap before washing with the washmit?

  • @johnneidert5777
    @johnneidert5777 2 ปีที่แล้ว

    Noticed you didn't have the Griots foam cannon set to full foam. That little black knob on the cap should have been turned all the way clockwise. While Mega Foam is still the champ, the other products would have produced better foam if set to full foam. I'm guessing that you may have been using the Ryobi 1600 psi pressure washer because I heard is cycle just like mine is.

    • @BringItMuscleCars
      @BringItMuscleCars  2 ปีที่แล้ว

      I have an active VF52. I do run a 1.1 orifice. Moving the knob doesn’t change things much. It’s a consistent test if I never change it. I’ve used most of those products with the MJJC foam cannon with similar results.

  • @aztekcayt7945
    @aztekcayt7945 2 ปีที่แล้ว +4

    Something is not right I believe you’re using too much water or your pressure washer is low on psi possibly but there’s no way they do barely even that

    • @aztekcayt7945
      @aztekcayt7945 2 ปีที่แล้ว

      But still very great video !

    • @BringItMuscleCars
      @BringItMuscleCars  2 ปีที่แล้ว +1

      I’ve tested them with 3 different power washers and 2 different foam cannons. The mean thing is I used all of the same equipment on the same day. So the test is constant. The only thing I can think of is some of those soaps work better different types of water. I don’t think any of them are bad. There’s a lot of overlap with the Adams shampoos. For me the two best are mega foam and the graphene.
      I get 95% of the foaming soaps to work great for me. Thank you for watching and commenting.

    • @aztekcayt7945
      @aztekcayt7945 2 ปีที่แล้ว

      @@BringItMuscleCars yeah that makes sense totally understand they each serve their own purpose but very pricey all of them in the end haha I’ve been wanting to “upgrade” I’ve been using maxi suds 2 , honey dew , and mr pink but I get 1 gallon for $22 for each of those I want that adams mega foam but for $60 that’s a scary price ahaha

    • @BringItMuscleCars
      @BringItMuscleCars  2 ปีที่แล้ว +1

      @@aztekcayt7945 I still use honeydew and mr pink all the time. They are a good low cost soap. Mega foam really only foams better than them. I always say most of these soaps work great if you use a wash mitt. I’ve tested a bunch of Walmart soaps and they work. I’ve got videos on all those. You may want to check them out.

    • @aztekcayt7945
      @aztekcayt7945 2 ปีที่แล้ว

      @@BringItMuscleCars gotcha thanks for getting back to me and letting me know means a lot n

  • @bobbyjones2112
    @bobbyjones2112 2 ปีที่แล้ว +1

    Yeah you’re right that mega foam is insanely better than the others..lol

    • @ft7234
      @ft7234 8 หลายเดือนก่อน

      Better at foaming, not cleaning. The graphene shampoo is superior in every way other than foaming. The lubricity on it is so better than any other Adam's soap.
      Higher lubricity > more foam.

  • @DuckMcDuckinson
    @DuckMcDuckinson ปีที่แล้ว +1

    Put a 1.1mm orifice on your cannon. Way thicker suds.

  • @autograph415
    @autograph415 2 ปีที่แล้ว

    do you recommend the graphene

  • @youngtapo253
    @youngtapo253 ปีที่แล้ว

    What kind of pressure washer do you have

  • @autograph415
    @autograph415 2 ปีที่แล้ว

    is the graphene worth using on a non protected pa8nt i should ask

    • @BringItMuscleCars
      @BringItMuscleCars  2 ปีที่แล้ว

      Yes it is. Does it protect the same as having a spray - no. Will it help the water bead up and run off for a week or two - yes.

    • @autograph415
      @autograph415 2 ปีที่แล้ว

      @@BringItMuscleCars good to know, I currently use i think armoralls wash and wax and thay seems to work well, ill try the graphene next!! Grtting some mega foam tomarrow that I'm gonna test our

    • @BringItMuscleCars
      @BringItMuscleCars  2 ปีที่แล้ว

      @@autograph415 I like mega foam a lot.

    • @autograph415
      @autograph415 2 ปีที่แล้ว

      @@BringItMuscleCars good brother

    • @autograph415
      @autograph415 2 ปีที่แล้ว

      I drive a g35 coupe. I hope you can still accept me as your brother

  • @Public2001
    @Public2001 5 หลายเดือนก่อน

    Low PSI or too much water

  • @jrrogersstang4696
    @jrrogersstang4696 2 ปีที่แล้ว

    Let's go 🚗💨🔥

  • @mijares638
    @mijares638 2 ปีที่แล้ว

    Sickkk🤙🤙💯💯🔥🔥

  • @camopaint0707
    @camopaint0707 2 ปีที่แล้ว

    holy kids

    • @BringItMuscleCars
      @BringItMuscleCars  2 ปีที่แล้ว

      They are like 3 houses away. Nothing I could do about it.

  • @Jack-b5o6r
    @Jack-b5o6r 2 ปีที่แล้ว

    First