That big warrior winch is something I absolutely need. My Warn 16.5 isn’t strong enough for what I do so I’ll definitely be trying one of these asap. I like the hidden winch setup in that equipment trailer too but I have to wonder how long that latch will live.
Some of those trailers the amount of standard stuff is really quite nice a tilt deck with the roller on the front of it that makes it for very nice you’re not messing up either synthetic or wire rope winch cable, I also like the the one aluminum trailer with the full flat ramp we’re going down the road that would save a lot on wind resistance
I like the MaxxD dump trailer due to 10k axles, but really wish it comes in a tripple. Only bad thing is that spare rims/tires are going to be hard to find, maybe even a special order.
I was at that show 2021. Saw some pretty cool stuff, and saw some pointless stuff. Like a receiver hitch step that doesn't extend out from under a folder down tailgate. Yes, I know you can put an extension on it but that should be part of the sales pitch.
Was I the Only one that seen those horrible welds on that Black Rhino trailer aluminum low pro trailer. WTF. and you brought that to a trailer show. I'd be like your "FIRED" but The new SURE-TRAC Trailer was really nice
Speaking from 30 years of off road experience I prefer Warn winches. I have not heard of this other winch brand so it would be interesting to see where they are made.
Just out of weird curiosity but have you ever bought anything from any of the shows you go to? Or did you just find a company you like and go buy something else they may have that was NOT in a show (besides that dump trailer)?
As a welder, those 25% stronger welds from black rhino looked HORRIBLE. I'd put my 3 of my buddies tig welding and alum mig welding those same trailers at spec against their first 10 trailers on the market. Those welds were horrible
Fellow tig boy here, I liked how he made it seem like “their” wire is so special… they are using 4943. It is a great wire but they are not the only ones using it! Just started up my own trailer business, launching January 1st. They will be the talk of the show next year.
The spilt gooseneck trailer is NOT new. Fred Mann, who has since passed away, patented this design and used it in his trailers. His company was Mann Manufacturing. I should know because my wife and I had a trailer dealership in northern MN and sold Fred’s trailers. I used one of the split goosenecks in hauling for hire.
The welding on the rhino trailer is a bit eeck, the stops and starts are cold and rather obvious that they were not feathered, there is undercut, and the exposed beads on the railing and the capped tubes could have been blended with a burnishing instead of leaving them as they are, not a good look cosmetically speaking, or at least tig the caps. They really need to look at their welding procedure, investing in pulsed mig and get some training on it, looks like regular spoolgun beads. Heck, they didn't even clean all the soot from the joints/beads, how difficult is it to run a brass wire wheel or cup.
aluminum trailers should never be welded. it will crack no matter what. only rivets or huck bolts will hold strong enough and allow for enough flex. schuut is the only company making then that way and the germans.
![[LIVE] : ONE ลุมพินี 68 | คู่เอก "พระจันทร์ฉาย vs โจนาธาน"](http://i.ytimg.com/vi/F3IM3w-XchI/mqdefault.jpg)
![[Watch Party] APL 2024 รอบ 8 ทีมสุดท้าย ไทยต้องแชมป์ !](http://i.ytimg.com/vi/NctOkvaex-Y/mqdefault.jpg)
Dump speed is a major factor that so many dump trailer manufacturers seem to overlook. It’s refreshing to see MaxxD with that dual pump setup.
When people won't tell you the price you know it's too much. Sounds like a politician, I won't even bother looking.
That sure trac trailer at the end was slick as all get out!
That big warrior winch is something I absolutely need. My Warn 16.5 isn’t strong enough for what I do so I’ll definitely be trying one of these asap.
I like the hidden winch setup in that equipment trailer too but I have to wonder how long that latch will live.
Some of those trailers the amount of standard stuff is really quite nice a tilt deck with the roller on the front of it that makes it for very nice you’re not messing up either synthetic or wire rope winch cable, I also like the the one aluminum trailer with the full flat ramp we’re going down the road that would save a lot on wind resistance
Love it! Keep up the great work! Trailers... an addiction every man has. 😅
It's great to see the yearly improvement. Still waiting on a trailer that has wide turn assist.
I agree, I’m sure you could have one custom built, but they cost would be pretty extreme
I’m very happy to see more trailer videos
Trailers have come a long way since I used to makes them in my garage back in the 80s
That prototype is really just a scaled down landoll style trailer. Been around for ages.
Thank you for the walk through
I love that triumph galvanized tilt deck gooseneck !
I like the MaxxD dump trailer due to 10k axles, but really wish it comes in a tripple. Only bad thing is that spare rims/tires are going to be hard to find, maybe even a special order.
Some very nice trailers
Novae is like 15 minutes away from me in Markle, IN, a few friends work there building those suretrac trailers!
Dual pumps have been available in the trailer parts aftermarket for some years.
4:00 the way he says "25,000 Pounds" has me sold before hes even done with the pitch.
I have the demco latch on my dump and it's so damn easy and quick
Stanley Dirt Monkey that is some cool trailers
Very!
Nice one Stan. 👍👍🏴🏴
Great job brother.👍🏻🇺🇸🇺🇸🇺🇸
Leave it to Dirt Monkey to always hook you up.Those were some super nice trailers. Thanks 😊
I was at that show 2021. Saw some pretty cool stuff, and saw some pointless stuff. Like a receiver hitch step that doesn't extend out from under a folder down tailgate. Yes, I know you can put an extension on it but that should be part of the sales pitch.
Was I the Only one that seen those horrible welds on that Black Rhino trailer aluminum low pro trailer. WTF. and you brought that to a trailer show. I'd be like your "FIRED" but The new SURE-TRAC Trailer was really nice
👍🏻👍🏻👍🏻
Where it was ? Thanks for sharing. Very interesting
Speaking from 30 years of off road experience I prefer Warn winches. I have not heard of this other winch brand so it would be interesting to see where they are made.
The demco is the best hitch out there
At the 2:18 that trailer been around since 1980's.
Just out of weird curiosity but have you ever bought anything from any of the shows you go to? Or did you just find a company you like and go buy something else they may have that was NOT in a show (besides that dump trailer)?
As a welder, those 25% stronger welds from black rhino looked HORRIBLE. I'd put my 3 of my buddies tig welding and alum mig welding those same trailers at spec against their first 10 trailers on the market. Those welds were horrible
Fellow tig boy here, I liked how he made it seem like “their” wire is so special… they are using 4943. It is a great wire but they are not the only ones using it! Just started up my own trailer business, launching January 1st. They will be the talk of the show next year.
I have to give you a prop for helping them you are a pro
Oooooowwww 10k torsion axels, when they start making thoseeee. Sexy. Might build my next trailer with them boys. Gotta find em now
Stan, she didn't even bat an eye at your bigger is better comment. Unbelievable.
The spilt gooseneck trailer is NOT new. Fred Mann, who has since passed away, patented this design and used it in his trailers. His company was Mann Manufacturing. I should know because my wife and I had a trailer dealership in northern MN and sold Fred’s trailers. I used one of the split goosenecks in hauling for hire.
14:23 Used the style of that trailer before, it was convenient.
NassAwe welding wire sounds famcy af.
When on camera as a salesman
Nevvver say “so yea that’s about it”
Looks like a fe manufacturers are finally following suit if Diamond C Trailers 🤣
The welding on the rhino trailer is a bit eeck, the stops and starts are cold and rather obvious that they were not feathered, there is undercut, and the exposed beads on the railing and the capped tubes could have been blended with a burnishing instead of leaving them as they are, not a good look cosmetically speaking, or at least tig the caps. They really need to look at their welding procedure, investing in pulsed mig and get some training on it, looks like regular spoolgun beads. Heck, they didn't even clean all the soot from the joints/beads, how difficult is it to run a brass wire wheel or cup.
Hell yeah brother
This is not the Cletus McFarland TH-cam channel!! 😂😂
We have changed out all demco hitches because they keep coming loose when loading and unloading equipment, cool but junk.
Not sure i want to google Maxx-D
here to help
You’re afraid of a major collapse and you’re hoarding fuel but you’re fine traveling far from home?
LOOK AT THE SIZE OF THIS THING !!! “That’s What She Said”. Great I’d Stan
This is simply just common sense technology that they will charge a arm and a leg like they just invented the wheel.
The dump trailer is of no use. Better be dumping on level ground
aluminum trailers should never be welded. it will crack no matter what. only rivets or huck bolts will hold strong enough and allow for enough flex. schuut is the only company making then that way and the germans.
I dont see the point of that lock, nothing a grinder cant cut through
Go back to the Gen Y booth please lol
So very first hitch latch PLASTIC so in 10 years you will be stuck trying to latch it after the top broke off
The guy selling trailer locks should put a little more effort into his videos. I watched it and wasnt impressed.
Extremely cheap trailer looks very weak