Plumbers Secret OR Did YOU know this handy Plumbing Tip?

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 103

  • @kylejames5121
    @kylejames5121 หลายเดือนก่อน +10

    New one for me always change the whole body or just the head didn’t realise u can buy the plate great video 👊🏼

  • @paulmusther9492
    @paulmusther9492 หลายเดือนก่อน +4

    Learned something new today. Didnt know you could buy new plate's. Thats why i love plumbing.

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      👊👍

    • @malachy1847
      @malachy1847 หลายเดือนก่อน

      @@bluebulldog_uk Obviously Honeywell Diverter Valve manufacturer may have a problem with those shut off balls swelling for a pastime , so just by replacing that top plate coupled to new Ball , it Sorts the Problem... great Work Around, personally i would have likes with the Tiles behind a door especially , but you went that extra mile to keep a person happy... Great Result.

  • @stepbackandthink
    @stepbackandthink หลายเดือนก่อน +4

    What you said about customers reluctance to call you back is exactly why you see other plumbers on TH-cam saying, "I've been doing this for 17 years and never had a problem" when you can blatantly see that what they are doing isn't right.

  • @danielscott1423
    @danielscott1423 หลายเดือนก่อน +5

    Nice! never thought of doing that, Cheers Mate

  • @cathyoshea3844
    @cathyoshea3844 17 วันที่ผ่านมา +1

    Can you do the same on a three-way motorised Valve, never knew you could just change the plate poster show you learn something new everyday well done.

    • @bluebulldog_uk
      @bluebulldog_uk  17 วันที่ผ่านมา

      Yes mate you can il do a video on one 👍

    • @peterwhite51
      @peterwhite51 16 วันที่ผ่านมา

      It's a three way he's working on!

  • @pauljohnston-s3x
    @pauljohnston-s3x หลายเดือนก่อน +3

    Yes I’m like you I’d rather go back and have a happy customer. Didn’t know you got the plates for the mv 👍

  • @robertpeters8531
    @robertpeters8531 หลายเดือนก่อน +1

    That’s a really good tip regarding the MV. Look forward to your video on the diverter valves, your knowledge of plumbing coupled with your hand skills is as good as it gets. In addition to said knowledge you have what I would call “ The extra mile factor” ie you go above and beyond for your customers. Not every plumber would be bothered going back to rehang that towel rad. You my friend or the bench mark for plumbing. If there was a Dali lama for plumbing you would be up there Luke. Keep the content coming. Superb work my good man.

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Thanks mate really appreciate the kind words 👊👍

  • @daarck_worgen
    @daarck_worgen 18 วันที่ผ่านมา +1

    seems like a good guy. Gets a follow/sub.

    • @bluebulldog_uk
      @bluebulldog_uk  17 วันที่ผ่านมา

      Thanks mate much appreciated 👊👍

  • @StevenHarrison-ft7jl
    @StevenHarrison-ft7jl หลายเดือนก่อน +1

    Yes did know you could change the plate , good to see some one carrying it out.

  • @davidgrainger-tm1ko
    @davidgrainger-tm1ko หลายเดือนก่อน +1

    ive never even thought of this , so its defo an option if im busy that day , but probably never will as im stuck in my old ways of changing the lot ,great tip though

  • @Rik5tar
    @Rik5tar 19 วันที่ผ่านมา

    Like the repair on valve great work

  • @fattoamanowoodwork3638
    @fattoamanowoodwork3638 หลายเดือนก่อน +1

    I thought of doing that but never trusted it would work now i do. Thanks mate

  • @johnmurphy1466
    @johnmurphy1466 หลายเดือนก่อน +2

    Yep nice job with the radiator, job satisfaction with a happy customer 👍

  • @johncummins3860
    @johncummins3860 หลายเดือนก่อน +1

    Always fold those cleaning strips in half down the lenth when cleaning pipes - gives you more control and you can target stubborn areas !

  • @JK-we1dr
    @JK-we1dr หลายเดือนก่อน +1

    Nice one, I had that issue :) not sure I’ll be diy’ing that one myself

  • @danieljohnson553
    @danieljohnson553 หลายเดือนก่อน +1

    Blooming awesome that buddy. Great repair. Does this only work on Honeywell though? Cheers

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน +1

      No mate I’m going to do a full video on diverters and how to repair there’s a few you can repair

  • @killerbean9911
    @killerbean9911 หลายเดือนก่อน

    With blowtorches, if I've ever had issue setting it off, I just turn it upside down and spam the button like you did while hitting the curve of the tip with something metal, it shakes the tiny bit of flux/solder that is stuck in there :)
    Top video as always, sometimes we gotta go back to job, it is what it is!

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน +1

      I’ve bought a super fire 2 now mate I stripped it to pieces and still would not work…drove me insane 😅😅

  • @davehunter6920
    @davehunter6920 หลายเดือนก่อน +2

    yes mate ...more interested in a happy customer..it leads to more work

  • @jameswilson2899
    @jameswilson2899 หลายเดือนก่อน +2

    Great content as always mate, what's the brand of paste you use on rad valves

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Thanks mate. Jet lube V2 plus

  • @gurdittsingh7787
    @gurdittsingh7787 หลายเดือนก่อน +1

    Can I just ask if the left hand
    pipe for towel rail refit could have been done by cutting just enough at the left hand end (keeping the pipe still attached to its valve) so just reconnect by resweating at the elbow only? No need then for a coupling in this left hand pipe. Me thinks...?
    Thanks to you for kindly sharing your experience, working knowledge... very appreciated!

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Yeah could have sweated it off save a coupler I suppose but when it’s painted shouldn’t really see it but fair point mate 👍

  • @amagos
    @amagos หลายเดือนก่อน +1

    Very useful. How did you know it must be the plate and not the head, i.e. how did you know the head was working correctly?

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Moving into hot water and heating positions as it should be and trickling round heating always the ball 👍

  • @stabani6944
    @stabani6944 หลายเดือนก่อน +4

    Good job mate

  • @grahamatkins8845
    @grahamatkins8845 หลายเดือนก่อน +1

    Hi where did you get the plate from ,,,any part No please great fix I did not know this
    Regards
    Graham

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Hi mate I will link below but you can use the part number to source from wherever,
      I normally use city plumbing thou
      www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjIl-m5k7KJAxWsk1AGHVjvMjkYABAFGgJkZw&co=1&gclid=EAIaIQobChMIyJfpuZOyiQMVrJNQBh1Y7zI5EAQYASABEgJGR_D_BwE&sph=&ohost=www.google.com&cid=CAASJuRoAvBaNWcfW1dbHZyyVZkfsCSCZYP-b-0BOAVav37vUogNUR-_&sig=AOD64_1KWclv4NJk8hYw11GkFJrBevO5cg&ctype=5&q=&ved=2ahUKEwjemuW5k7KJAxWbZ0EAHSDsL7EQwg8oAHoECAMQDA&adurl=

  • @b1h2u3p4
    @b1h2u3p4 หลายเดือนก่อน +2

    Nice work!

  • @andrewoleary9704
    @andrewoleary9704 หลายเดือนก่อน

    Nice one mate. Didn’t know they existed. Will get one for the van

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Handy to keep mate only about £25-£30

  • @waynebrown7671
    @waynebrown7671 หลายเดือนก่อน +1

    I would of centred the towel rail in the first instance but s-it happens 😅 you sorted it 👍

  • @mickobyobrien2650
    @mickobyobrien2650 หลายเดือนก่อน +1

    After fitting that towel rail,are those air vents in the airing cupboard too low now.

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน +1

      Fair point, air just going straight into that towel rail but with the combined Feed shouldn’t pull in any air really

  • @TheMaintenancePlumber
    @TheMaintenancePlumber หลายเดือนก่อน

    Great tip will definitely try this on my next one

  • @andymav3023
    @andymav3023 หลายเดือนก่อน

    Nice job with the rad was that a combined feed and vent with the valve you put on it ?

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Yes mate 👍 only do it when the boiler has a overheat stat thou

  • @josephfelts6560
    @josephfelts6560 หลายเดือนก่อน +2

    Thanks, Luke. I've done this myself, on occasion, with the diverter valve. It's your main port of call for when the rads warm up some without demand, same time the hot water is on.
    The rad did look more to the right on first glance. I would have looked to have it centralised from the outset, but the customer looked at it before you left, and I know how you felt, hearing they weren't satisfied and they're elderly, and you'd have wished they said something there and then, because you want customer satisfaction.
    It happens, and when it's all square, and you chat about it afterwards, it's all good. That's how we all get on. Well, should do.

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Yeah mate in hindsight was my mistake it looked lot better afterwards, yeah the diverter repair is something I do rarely in certain circumstances, works well with tight access 👍

  • @llamedosr7843
    @llamedosr7843 หลายเดือนก่อน

    Worth using the quality mv when it comes to spares

  • @davidstanley5298
    @davidstanley5298 หลายเดือนก่อน

    great job mate well done nice one

  • @audibell
    @audibell หลายเดือนก่อน

    Nice video Luke 👍😁👍😁

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน +1

      Thanks mate 👍👍

  • @johnoreilly4408
    @johnoreilly4408 หลายเดือนก่อน +2

    and next week called back because the actuator is gone, just replace the whole thing , not much different in labour costs and the client has something which should last another 20 years

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      If it goes il let you know but actuator wasn’t as old as body so if I was 5 years old they should get maybe 15 years now?

  • @rognevs5695
    @rognevs5695 หลายเดือนก่อน +8

    Just remember if the top of the lid has a dimple on it you can, if it’s flat on top don’t try and remove the head, if you know you know 😂

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน +2

      Oh I know…learnt the hard way 😅

    • @rognevs5695
      @rognevs5695 หลายเดือนก่อน +1

      @ hot or cold system hard way 😂

    • @DavidKneale
      @DavidKneale หลายเดือนก่อน

      It shouldn't matter if the pressure is off though.​@@bluebulldog_uk

    • @Frozen-Explosion
      @Frozen-Explosion หลายเดือนก่อน

      I don't know, what's the issue if it's flat on top?

    • @devonrodney2847
      @devonrodney2847 หลายเดือนก่อน

      Flood insurance😂

  • @TomChapman-wv9iq
    @TomChapman-wv9iq หลายเดือนก่อน +1

    Not all people are as understanding as you,it becomes a pain to revisit jobs

  • @neiltitmus9744
    @neiltitmus9744 หลายเดือนก่อน +1

    If i had access i think i would just change the valve and have done

  • @yukaumebayashi2674
    @yukaumebayashi2674 หลายเดือนก่อน

    5:41

  • @joetucker561
    @joetucker561 28 วันที่ผ่านมา

    This nerrad torches are crap. Had one for a couple of days and slung it. Same issue, wouldn’t ignite

  • @fattoamanowoodwork3638
    @fattoamanowoodwork3638 หลายเดือนก่อน +1

    On the second client… so that want the rad moved to be on the centre yet they are ok with the tiling….?lol😂

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Yeah couldn’t get a match unfortunately so best of a bad situation

  • @llamedosr7843
    @llamedosr7843 หลายเดือนก่อน +1

    State of that tiling 😂

  • @glyndavies591
    @glyndavies591 หลายเดือนก่อน

    Did nt know that you could change the plate tidy job on the towel rail they should have said at the start where they wanted the towel rail saved a lot of hassle

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      One of them mate I just presumed and nothing got said but glad it’s sorted for them 👍

  • @paulgilliland2992
    @paulgilliland2992 หลายเดือนก่อน

    That torch you’re working with isn’t designed for inverted brazing. You should know this yeah don’t you agree. Benzomatic has a brilliant website with everything you’d want to know about soldering.

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      So the Nerrad torch you can’t use upside down? Never heard of that to be honest, Every blowtorch I’ve ever used I could

  • @alshore6168
    @alshore6168 หลายเดือนก่อน

    👌 👍

  • @tonymurff5234
    @tonymurff5234 หลายเดือนก่อน +2

    Feck that blow lamp in the bin 🗑️ 😂
    😎👍🤜

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Hasn’t been used much since I got my press gun 😎😎😂👍

  • @mitchellwheeler1642
    @mitchellwheeler1642 หลายเดือนก่อน

    You can't please everyone all of the time fair play

  • @HP23569
    @HP23569 หลายเดือนก่อน

    BG dustsheets not fireproof then!

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน +1

      Unfortunately not 😂😂😂

  • @SuperWayneyb
    @SuperWayneyb หลายเดือนก่อน

    🤘😎🤘

  • @Tom_Plumb_PHS
    @Tom_Plumb_PHS หลายเดือนก่อน

    I think I'd have launched that blowtorch out the customers window. 😂 Shrewsbury college went over to them just before I left. Wasn't impressed I prefer my superfire with the swirl tip.

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน

      Mate I was so close to throwing the thing 😂😂 just bought a new rothenburg super fire 2

  • @ronnierobinson1502
    @ronnierobinson1502 หลายเดือนก่อน

    Cannot believe you use them levels, they are cheap and nasty .......im addicted to the wera gear its great

    • @bluebulldog_uk
      @bluebulldog_uk  หลายเดือนก่อน +2

      Do wera do spirit levels? To be fair the margin is low 0.5 same as stabila and they have been sound for 1/3 price

    • @Shayflannel
      @Shayflannel หลายเดือนก่อน

      Wera don't do spirit levels not sure what this guys on about

    • @ronnierobinson1502
      @ronnierobinson1502 หลายเดือนก่อน

      @@Shayflannel Thick twat i know that ..... did you not see the wera tools in the video

  • @ProTroll_UK
    @ProTroll_UK หลายเดือนก่อน

    Diverted 😂🤣🤦‍♂️

  • @davehunter6920
    @davehunter6920 หลายเดือนก่อน

    get the lighter oot