Since it's mostly for toddlers and kids it's probably OK, but I totally thought the same thing. Especially since he took the time to notch out the transition pieces rather than screwing em to 2x4s, shame to put the extra carpentry effort in and gloss over the support beams. They should also be every 8 inches. I suppose the main goal was to make it easily manageable though, the industry standard support would add alot of weight
Did he even measure the transition ? That’s one of the most important parts. Looks like he just eyed it. Kids... don’t build a ramp this way. Plenty of free diy ramp plans online
Great build. Put the latches and tongue/grooves in such a way that you can also just latch the two big parts together. That way you gain an alternative "short pipe" configuration at no extra cost and minimal effort.
Where do I start, so many things wrong. 1. Laying the stuts on the wide side facing up means that they're going to bow. 2. No need for the centre section of frame at that width (and if you lay the struts vertically) 3. Coping is way too small 4. Screwing into the edge of plywood - ouch! 5. Don't glue the riding surface! How are you going to change it when it gets worn out? 6. What radius did you use on the transition? How long was your flat?? These things are important.
@@StatesMusic haha who said I was looking at the comments for instructions? After watching the video and seeing some of the questionable design choices, I came to the comment section for entertainment ... And I got a little more than I bargained for.
nobody dropped in!!! smack the lip of the grind bar and waapaaaaaaaah!!! make this thing 6 inches shortaaaah and two feet widaaaah and then you will have something I can get down with. ...nice bike helmet bro-Im stealing your clamp idea
Crazy over built ramp. And don’t glue layers together, at some point you will want to replace top layer after it gets beat up. I wouldn’t even put inner arch supports on an 8’ wide mini ramp. Not needed.
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
the ramp maker: "I'm adding in a grinding bar,"
Me: "I'm pretty sure its called coping"
Well he isn't wrong tho
True
think its just so the average person can understand, as most people wouldn’t understand what the coping is for
But u understood him
that's way I sead
Me watching this knowing I'll probably never make it
That copping is way to low they won’t be able to do grind tricks
"gRiNdInG bAr"
Hahahahhaha
You put 2x4’s in wrong. It will bow.The 2’ edge is more rigid.
Since it's mostly for toddlers and kids it's probably OK, but I totally thought the same thing. Especially since he took the time to notch out the transition pieces rather than screwing em to 2x4s, shame to put the extra carpentry effort in and gloss over the support beams. They should also be every 8 inches. I suppose the main goal was to make it easily manageable though, the industry standard support would add alot of weight
Totally wrong!!!!! Never put screws in the edges of plywood!!!
Did he even measure the transition ? That’s one of the most important parts. Looks like he just eyed it.
Kids... don’t build a ramp this way. Plenty of free diy ramp plans online
Just like this one!
amen
he has no idea what hes doing
Great build. Put the latches and tongue/grooves in such a way that you can also just latch the two big parts together.
That way you gain an alternative "short pipe" configuration at no extra cost and minimal effort.
Where do I start, so many things wrong.
1. Laying the stuts on the wide side facing up means that they're going to bow.
2. No need for the centre section of frame at that width (and if you lay the struts vertically)
3. Coping is way too small
4. Screwing into the edge of plywood - ouch!
5. Don't glue the riding surface! How are you going to change it when it gets worn out?
6. What radius did you use on the transition? How long was your flat?? These things are important.
that coping isnt set right, its too low.
Exactly somebody who actually noticed
Ya
Could you please help me with the scales??? Idk how lond and how wide it should be, i just need the measures pls anybody :/
I've made something similar to this. 4' x 18'. That's very small but if wider then better.
I’m watching this over and over and over again you know what I’m gonna make now. Thank you
The lucky little buggers! Could you make me one too... I'm 46. 😂
These comments are all over the place ...
well you’re supposed to watch the video to get insight on how to build. You dont look at the comments for instructions.
@@StatesMusic haha who said I was looking at the comments for instructions? After watching the video and seeing some of the questionable design choices, I came to the comment section for entertainment ... And I got a little more than I bargained for.
Hi, please do you have the measurements on a document?
We want this ramp¡¡¡¡ congratulation from Chile¡¡¡
nobody dropped in!!! smack the lip of the grind bar and waapaaaaaaaah!!! make this thing 6 inches shortaaaah and two feet widaaaah and then you will have something I can get down with. ...nice bike helmet bro-Im stealing your clamp idea
Crazy over built ramp. And don’t glue layers together, at some point you will want to replace top layer after it gets beat up. I wouldn’t even put inner arch supports on an 8’ wide mini ramp. Not needed.
That sunshine makes me feel it’s a great video from Aussies🇦🇺😂
😂😂😂😂
This looks like the best mini ramp I've seen! Do you know what the cost of this was?
If only you could make that for me I’m bad at instructions
Great job. Happy new year
Can u bild one for me I want one
this is a terrible build
I would buy some cheap Masonite for the top!
what are the dimensions??? thx!
He winged it.
could you please make one for us we can pay too
coping is way too small lmao
He’s on a razor scooter.
Happy new year.I love your shows.
Portable?😂😂👍
Feliz Año !! 👏👏👏👏💓
Thanks for helping me out!
.
The kids do in fact grind on the bar.
Awsome! Great idea! Thanks!
Guys jesus is coming back to earth repent from ur sins before he comes! 💛💚
This mini ramp is a fuckin sin
Let's hope Jesus learned how to ollie while he was gone.
Sick build bruh - but you gotta drop in at the end or you have to build one for me :-)
Hi Boys 😍💋 💝💖♥️❤️
hideous accent. watched muted.
Rude asf
How rude :( just try to be kind
Wtf 🥴
I need boyfriend 💋💋💋💋💋💞💞💞💞
no you dont
Really nice 👌 😍💋 💝💖❤️
So Nice 💘💘💘💘💘💘
Hi Boys 😍💋 💝💖♥️❤️