i also have a leaven k620 and i modded it with the following: Holee Mod Lube Stabs with Permatex Clipped Uneven Feet of the Stabs Changed Switches to Gateron Pro Reds Changed from ABS to PBT Keycaps It sounds a whole lot better than its stock... almost sounds as good as my steelseries apex pro and cougar attack x3
These are the type of cheap keayboard that would either make you flip the table or motivates you to mod it. Anyways, great modding. You transformed it from 0 - 8 real quick.
Just want to ask for the PE foam mod is it ok to use the foam that comes with the keyboard during unboxing? The protective thin white foam for the keyboard
bro is this keyboard good? i am thinking to get this i'll use this stock for some days then i will change the switches and lube them,and also do the pe foam and tape mod. should i get it?
hi would like to ask if this keyboard has anti ghosting feature , coz whenever playing fps games while holding a+s number 4 is not working, is it something to do with anti ghost or the keyboard is defective?
Hello I have a question, when I turn off my pc with turned off backlight on the keyboard when I open my pc again the 2 panels on the keyboard only lights up unless I switch the light mode. Does this happen to you?
Hi! I'm trying to do the same mod to the same keyboard but I feel like my akko jelly blacks do not fit inside the keyboard as whenever I place the keycaps then try to remove it, the switches gets removed along with the caps. Though, they do work, the fitting is the problem. Is it normal?
@@Burpling00 i have a fix for this one cut a thin strip of electrical tape and put it to the left and right side of the pcb make sure no lights is leaking from both sides
@@Burpling00 Thank for the answers. Btw,I really like your content. I might have ended up watching all of your videos about keyboards haha. Keep it up bro. Sorry for my english hehe.
Should I buy this keyboard for modding for fun only? Cuz my Aula F3261 has a broken daughter board and it's now completely useless ( the main PCB is still usable, but without the same or almost the same daughter board, the PCB wouldn't turn on, and in Windows 10 only showed that it knows a keyboard is connected, but cuz the daughter board broke so no function at all ) I just want a foam mod, PCB foam mod, slap those Cs Matcha Green leftover from my Aula keyboard, and a good Aifei WOB PBT Doubleshot clone keycap kit. Is it a good combo? I'm poor so this is my only option.
@@ulfricstormcloak7142 A CO68 with the Aula F3261 stab set, a random 5 bucks pudding pbt keycap set and Akko Matcha Green for the whole set friction mouted with gummy O-ring. PCB silicon and no more foam.
if i didnt remove the switches but i unscrewed the plate will i be able to unplug the board and do the tape mod is it safe? because the pcb and the plate are stick into each other
yeah you can do that. you will have to remove the keycaps to access the screws to open the front plate. sometimes the switches will come out with the caps which fine and you can put them back in after modding. you will get a noticeable difference in sound when doing the foam & tape modding but without clipping the stabilizers you will still get a rattle on the spacebar and shift keys
Yeah, your stock red outemu switches should be fine as long as you lube them. For keycaps I recommend going pbt, there are some cheap ones out there for around 600+ and under 1k, or you could just keep the stock keycaps. Buying cheap abs keycaps would just mean you're buying them for the looks which is also fine. But for sound wise it's not worth it since you'll just get the same sound with the stock keycaps.
@@Burpling00 Ok, i was thinking to buy purple keycaps with purple outemu swithes then pre modded stabs and eva foam, masking tape and puller cause purple switches sounded good, and was cheap for 400+ only but im lazy to lube the switches
@@shubith1698 well my first time removing the switches were actually hard and it got easier the more times I did it. As long as you don't break any part of the PCB it'll be good. Bent pins from switches might be normal just bend them back with your finger
I guess it depends if you get a switch with a clear case or not. If it's opaque then it may affect the brightness of the led. I haven't really tried it since I don't have an opaque switch currently
@@takesht8058 I'm not really sure what you'd like, but here you go... shopee.ph/product/448512699/13075927190?smtt=0.72971865-1655361949.9 shopee.ph/product/578438693/10970290285?smtt=0.72971865-1655362039.9
The ones I'm sure are Akko CS switches, there's a lot options with those. The ones I've tried that fit the board are the akko cs silvers and the one I'm using, the jelly blacks
Hello, I'm well aware naman na akko switches ginamit and recommended switches for modding sa keeb na to.. but can i ask if somehow i can use gateron 3pin switches? I only have basic knowledge about this stuff kaya di ko alam
3 pin gateron won't fit in an outemu socket since the pins are too big. There is a hack tho to fit them, you have to cut the pins slightly which I don't recommend really if you're not confident enough to do it
@@Burpling00 can i use the white foam that comes on the packaging? is that a pe foam? after placing the pe foam at the middle of pcb and the plate do i need to poke the fosm because i need to plug the switch right or the switch will poke the foam itself then plug into the board btw im new to modding and its my first time modding the same keyboard.
@@ChillTours yeah you can use the foam that came with the keyboard for PE foam. It's actually what I used, and you don't need to poke holes on them. You can just install the switches normally
hello, malambot po ba talaga yung red switches ng leaven k620? nung sinubukan ko po kasi i pull yung switch gamit ang switch puller, nag b-bend po yung plastic niya + ang bilis magka scratch
@@Burpling00 super super confused right now lol, welp there goes my plan of replacing the switches. can I still lube the switches even if it's not non-hotswap?
@@karltheintern6531 you can try desoldering it, it's a hassle but if you want to change the switches that's an option. If you can't, one way to lube your switch is maybe syringe lubing. I'm not sure that it will work tho
Di ako sure sa lazada, pero yung sa shopee may options na red, blue and brown switches assuming na may stock pa. Sa shopee ako nagorder at kung anong link sa description, dun rin ako nagorder
Say, if I did this mod, except the lubing because I had blue switch instead red switch, will it sound different too? I bought the same keyboard as well.
It should sound better but I think you can't do the PE foam because blue switches are not hot swap. But you can still do the other mods without any problem
Hi po same po tayo ng keyboard, brown switches hotswappable.. pero once na inopen kopo yung kb it's soldered.. is it really hot swappable? I don't have a tool like yours yet so i can't risky-ly pull the switches out
@@Burpling00 do u have the same pcb the same as this one th-cam.com/users/shorts2FwYSuT8vQU?feature=share Mine is like that but k620.. he said he will do an update if still works but i dont see an update... Im scared to try his way His is leaven aswell
Ummm.. update xD I asked the shop they said that it was done like that so that the switches are more stable but it is hotswappable.. so yeah ill wait for the tool for safer extraction
hello :) i need help po with the stabs, i tried removing it and using nail clippers muna pero nung binalik ko lubog na po yung keycap (space bar) it’s my first time modding so i don’t know what i did wrong huhu
I think you put the stem of the stabs in the wrong direction. May two sides yan, one hole at two holes. Kung san mo ipapasok yung wires sa housing dun dapat nakaface yung two holes
The first time I pulled it out was actually really hard too. In the video, I disassembled and assembled it a couple of times, that's why it looked easy
It could work, haven't personally tried it but if it's the only thing you can find it's better than nothing I guess. You could technically also use tissue paper
How to fix bro di na masyado nag fufunction masyado yung W which is pinaka important key pa kailangan ma diin pa minsan para gumana pero minsan di na nanapindot what do u recommend sayang naman ilang months palang
@@johnandrei5924 baka sira yung switch, assuming na hotswap yung keeb mo. cheapest option is bili ka ng switch remover, tanggalin mo yung switch sa W at itry mo sa ibang key. If same problem rin, baka kelangan mo bumuli ng bagong switch. Cheap lang na man yung mga outemu switches sa shopee
true but gotta say it looks good tho, and it helps out with the sound too. There are also cheaper pbt keycaps out there around the same price as the keeb
@@kamutehhh1152 they're pretty much the same except for the spring, blacks are much heavier at 65g while reds are only 50g. If you want a heavier switch just go with blacks
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
This is one of the best modding videos I have ever watched! Simple and very easy to follow and details are very specific! Really appreciate it
Wow, what an improvement, nice job man :D. I just bought the same keyboard and am also wanting to mod it and fit it with the akko black switches ^_^
I bought leaven K20 and this video help me to custom Cheap Mechanical Keyboard thanks bro
Cheap Keyboard feels expensive hahaha
Thanks bro, will upload a new build soon
i also have a leaven k620 and i modded it with the following:
Holee Mod
Lube Stabs with Permatex
Clipped Uneven Feet of the Stabs
Changed Switches to Gateron Pro Reds
Changed from ABS to PBT Keycaps
It sounds a whole lot better than its stock... almost sounds as good as my steelseries apex pro and cougar attack x3
instead of the grease i used petroleum Jelly for the stabilizer and it worked better than i expected its an alternative if you do not want to order
These are the type of cheap keayboard that would either make you flip the table or motivates you to mod it.
Anyways, great modding. You transformed it from 0 - 8 real quick.
You're getting a lot views na... 👏👏👏 Nice work, keep it up.
in next video maybe u can review good switch to use in Leaven K620 hahah
maybe hahaha if only I have the budget
A ktt switch might fit it for thock or clack
@@erronchupapi8267 I actually just tested one and ktt switches actually fit
Subbed and liked for future modding preferences
very detailed video thanks man
hello great video i really like the final soundtest, by the way is the plate removable from the upper lid of the case? :)
It's not removable
Hi! Great video! I just want to ask if you clipped the 2 extra pins from the black switches you used?
5:50 is the keyboard warped? It looks like your near your left hand that the board is flexing when you type on it
Need more vido like this
This is a good video, subbed and I'm planning on buying a brown switch leaven, will it still sound as good with the brown switches?
I think it should still have the same sound profile. I'm not really a fan of brown switches but I'm sure it would still sound decent with the mods
thx for the vid this really helped me
glad I could help
Just want to ask for the PE foam mod is it ok to use the foam that comes with the keyboard during unboxing? The protective thin white foam for the keyboard
If used, will it damage the PCB?
@@kongvoonxiu3652 it's fine to use the included pe foam, it's what I actually used in that video
its a pe foam?
Really Nice bro
bro is this keyboard good? i am thinking to get this i'll use this stock for some days then i will change the switches and lube them,and also do the pe foam and tape mod. should i get it?
Is the blue switch hotswap
12 $ hotswap keyboard 🤫 lol
Btw nice modding, keep goin bro
hi would like to ask if this keyboard has anti ghosting feature , coz whenever playing fps games while holding a+s number 4 is not working, is it something to do with anti ghost or the keyboard is defective?
Hello I have a question, when I turn off my pc with turned off backlight on the keyboard when I open my pc again the 2 panels on the keyboard only lights up unless I switch the light mode. Does this happen to you?
Pretty late but, did you use different foams for pe and normal foam mod? if yes please tell me what they are.
I use eva foam for the case foam, but did you use something else for the pe mod?
I used eva foam for the case foam and regular PE foam, the one that came with the board
@@Burpling00 ty
Bro, the switch can be modified? I buy a blue switch, but i want to buy the red or Brown later
If you bought the blue switch, it's possible that yours is not hot swappable. Most of the time only red and brown switches are hot swap
12$ board with hotswap is just imbalance, wish i could buy one...
Shoppee
@@Timothybolok he/she is not from asia tf
is the stock switches enough quality to use?im thinkin about buying but cant change switches
Hi! I'm trying to do the same mod to the same keyboard but I feel like my akko jelly blacks do not fit inside the keyboard as whenever I place the keycaps then try to remove it, the switches gets removed along with the caps. Though, they do work, the fitting is the problem. Is it normal?
I actually have the same problem, I'm not really sure why, maybe it's just a fit issue
The stems just fit tightly onto the keycap, it is normal.
do you need to poke holes on the pe foam when putting the switches in?
Niceee MOD..what MIC are you using?
I'm just using a cheap microphone I found on Shopee, I think it's called BM-13
@@Burpling00 thank you keep it up!
What are the switches that are compatible with leaven k620 aside from the ones that you have used?
Any ktt or akko switches as long as they're 3 pins they should be compatible with the keyboard
@@Burpling00 will normal cherry switches like hyperglide blacks work?
Is it okay not to lube stabs and switches? Lazy af 😅
It's okay, but it won't sound good tho
Nice mod man, I'm planning to buy a clear case for this one, is it compatible with GH60 case?
I don't think so, it's a different screw layout and the type c connector could be in a different spot
It supports gateron switches too but not all models
Hi! I have questions. (1) Are we able to turn the side lighting off? (2) Does it remember your lighting settings after turning your PC back on?
Yes, you can turn off the side lights. Fn+] is the shortcut and I'm not sure but I think it doesn't remember the lighting settings
@@Burpling00 i have a fix for this one cut a thin strip of electrical tape and put it to the left and right side of the pcb make sure no lights is leaking from both sides
My leaven k620 blue lights stopped working… can you help me? I really dont know what to do…
Is it good to double the foam mode? Will it make a difference?
You can double the foam but there is an issue of closing it back, it might be harder and you may strip a screw
@@Burpling00 Is it better to cut the foam into pieces to fit in or to have a whole piece in it?
@@nathanielrazon3465 I think it's better to have it as whole as possible, but it's also fine to use it pieces
Is it still good until now? Is this keyboard good enough for gaming? Thanks for the answer hehe.
I only used it around 2 months, I had no problems using it with games like rhythm games, shooter or mmorpg
@@Burpling00 Thank for the answers. Btw,I really like your content. I might have ended up watching all of your videos about keyboards haha. Keep it up bro. Sorry for my english hehe.
@@spotlite4934 thanks dude! Glad I could help
where can I buy thos keycaps?
What switches did you use?
Should I buy this keyboard for modding for fun only? Cuz my Aula F3261 has a broken daughter board and it's now completely useless ( the main PCB is still usable, but without the same or almost the same daughter board, the PCB wouldn't turn on, and in Windows 10 only showed that it knows a keyboard is connected, but cuz the daughter board broke so no function at all )
I just want a foam mod, PCB foam mod, slap those Cs Matcha Green leftover from my Aula keyboard, and a good Aifei WOB PBT Doubleshot clone keycap kit. Is it a good combo? I'm poor so this is my only option.
What did you ended up with?
@@ulfricstormcloak7142 A CO68 with the Aula F3261 stab set, a random 5 bucks pudding pbt keycap set and Akko Matcha Green for the whole set friction mouted with gummy O-ring. PCB silicon and no more foam.
it's close to creamy sound 😮
Hey man, I'm thinking of modding my anubis ag 64 what switches do I use?
3 pin switches, try akko switches or ktt switches
if i didnt remove the switches but i unscrewed the plate will i be able to unplug the board and do the tape mod is it safe? because the pcb and the plate are stick into each other
yeah you can do that. you will have to remove the keycaps to access the screws to open the front plate. sometimes the switches will come out with the caps which fine and you can put them back in after modding. you will get a noticeable difference in sound when doing the foam & tape modding but without clipping the stabilizers you will still get a rattle on the spacebar and shift keys
Hey burpling, is it ok if its the stock red outemu switches? i dont really have much money ;-; and are abs or pbt keycaps are alr?
Yeah, your stock red outemu switches should be fine as long as you lube them. For keycaps I recommend going pbt, there are some cheap ones out there for around 600+ and under 1k, or you could just keep the stock keycaps. Buying cheap abs keycaps would just mean you're buying them for the looks which is also fine. But for sound wise it's not worth it since you'll just get the same sound with the stock keycaps.
@@Burpling00 Ok, i was thinking to buy purple keycaps with purple outemu swithes then pre modded stabs and eva foam, masking tape and puller cause purple switches sounded good, and was cheap for 400+ only but im lazy to lube the switches
@@vinzdaboi that sounds great, hope your build comes together with no problems
@@Burpling00 thank you hehe
@@Burpling00 Hi again, when lubing the switches, is it verry important to lube the springs?
removing the switch is really hard and it destroy. Is that normal?
Do you have a blue switch? If you do then maybe it's not hot swap
@@Burpling00 I got red.
@@shubith1698 well my first time removing the switches were actually hard and it got easier the more times I did it. As long as you don't break any part of the PCB it'll be good. Bent pins from switches might be normal just bend them back with your finger
@@Burpling00 found a way on removing it. By using two flat screwdrivers. I can tell the switches they use the quality is garbage.
@@shubith1698 you're not using a switch puller? I mean if that works and nothing breaks you can continue with that approach I guess
Why is it hard to take the switches masisira na ung plastic nya
No keycap interference?
how to disconnect daugter pcb
Nice voice!😁Sub for u
Sorry fr late comment, D you recomend ts keyb???
I think if you're planning on changing the switches and keycaps. My recommendation is to get ciy tester68 (wirless only)
Does the led get darker when u chance new switch
I have one and wanna mod it too
I guess it depends if you get a switch with a clear case or not. If it's opaque then it may affect the brightness of the led. I haven't really tried it since I don't have an opaque switch currently
can you recommend me a keycaps for my leaven k620, im not gonna mod it tho, just want to change the keycaps.
with the other shortcut keys labeled on the keybaord like the printscreen, del, pgUp, etc.
@@takesht8058 I don't think there's a keycap set with that. I'm not sure tho, maybe there is and I just haven't seen one yet
@@Burpling00 ok, just a normal keycaps then, what can you recommend??
@@takesht8058 I'm not really sure what you'd like, but here you go...
shopee.ph/product/448512699/13075927190?smtt=0.72971865-1655361949.9
shopee.ph/product/578438693/10970290285?smtt=0.72971865-1655362039.9
@@Burpling00 thank you so much
how do you managed to remove the switches?
mine has tighter one to remove
It's really tight the first time you remove it, it's gonna be a hell of a workout
because idk about which switch can use in Leaven K620
The ones I'm sure are Akko CS switches, there's a lot options with those. The ones I've tried that fit the board are the akko cs silvers and the one I'm using, the jelly blacks
@@Burpling00 Thanks for information bro
what type of keycaps compatible rito?
Any keycaps basta cherry mx compatible, make sure lang na pwede sa 60% keyboard yung keycap set
Hello, I'm well aware naman na akko switches ginamit and recommended switches for modding sa keeb na to.. but can i ask if somehow i can use gateron 3pin switches? I only have basic knowledge about this stuff kaya di ko alam
3 pin gateron won't fit in an outemu socket since the pins are too big. There is a hack tho to fit them, you have to cut the pins slightly which I don't recommend really if you're not confident enough to do it
can i eat keycap
Hey can i ask if the rgb light still works because i already ordered the materials to mod it its is working ?
Yes, it still works. I don't really use this anymore since I've upgraded. But I checked recently and everything still works
@@Burpling00 Thanks!
Do kailh box speed bronze fit in this keyboard?
I don't think so
still worth modding? lmk, planning to buy it
balak ko din po bumili neto red switch, hot swappable pala to di ko ineexpect hahahaha kamusta naman po pag stock lang po keyboard?
Okay na man siya stock, pero mas maganda kung imod mo. Kahit stock switch lang gamitin. Lube lang ang kailangan
@@Burpling00 thanks lods
there were only 45 switches in the box however this is a 61-key keyboard, did you buy another set?
Yes I bought 2 sets of the switches
how much is the total price of the mods not including the keyb
Lubes and tools - 500+
Foams - 100+
Switches - 1200
Keycaps - 1k
Kuya halos pareho po ba ng sound kung hindi po i lube?
Is it necessary to apply lube? Or I can skip that step?
If you're talking about lubing stabilizers, then you can't skip that part. Lubing them is essential
can i put honeymilk xda keycaps on it? pls answer
Yes you can
@@Burpling00 thank u so much
can i mod my k620 but only the masking tape mod and not doing the foan and lubing? do i also need to remove the switches before putting tape?
Yes, it's up to you to use tape mod only. There are no restrictions in modding. And you don't need to remove the switches to do the tape mod
@@Burpling00 can i use the white foam that comes on the packaging? is that a pe foam? after placing the pe foam at the middle of pcb and the plate do i need to poke the fosm because i need to plug the switch right or the switch will poke the foam itself then plug into the board btw im new to modding and its my first time modding the same keyboard.
@@ChillTours yeah you can use the foam that came with the keyboard for PE foam. It's actually what I used, and you don't need to poke holes on them. You can just install the switches normally
@@Burpling00 will the switch pins reach the board because of not poking the foam?
@@ChillTours i guess it depends on the thickness, but if you're just using what was in the box. It should be fine
hello, malambot po ba talaga yung red switches ng leaven k620? nung sinubukan ko po kasi i pull yung switch gamit ang switch puller, nag b-bend po yung plastic niya + ang bilis magka scratch
Mahirap talaga matanggal yung switches, ganyan din sa akin
@@Burpling00 ano po mga pede gamitin na switch sa kanya? can i use gateron switches, akko and outemu?
@@katsumi656 gateron won't fit. Either akko or ktt switches
Which is better between akko black and green matcha?
Personally I haven't tried the matchas, but I heard that both sound and feel good
Diba 5lin yang switches nayan chinat ko ung seller
I just want to ask if all K620 with red switches are hotswappable? I checked the seller and they said it isn't
Yeah I've heard others say that they also have non hot swap even with red switches. Depends on the shop I guess
@@Burpling00 super super confused right now lol, welp there goes my plan of replacing the switches. can I still lube the switches even if it's not non-hotswap?
@@karltheintern6531 you can try desoldering it, it's a hassle but if you want to change the switches that's an option. If you can't, one way to lube your switch is maybe syringe lubing. I'm not sure that it will work tho
@@Burpling00 thanks a lot man, appreciate it. looking forward to your vids
Can you turn off the rgb lights on the side?
Yes, press Fn + ]
And Fn+Space to turn off/on all lights
how do you fix the rattle on my space bar leaven k620
Have you already tried lubing your stabs?
i dont know what is stab
no i havent tried lubing
@@princedadulas3995 oh that's what you call your spacebar, shift, enter and backspace
is any pbt keycaps can fit on this while using the stock switches?
Yes, as long as the keycap set supports 60% keyboards
okay thanks, just got mine today. gonna mod it first then customize it soon@@Burpling00
how many pins does the keyboard switches use?
Only 3 pins, it doesn't support gateron switches. Use akko or ktt switches instead
@@Burpling00 alright thanks!!
Is the Leaven K550 hot swappable? I got the red switch one
I think they're hot swap if you got the red switches
@@Burpling00 Thank you! I just got this and it's my first mech
@@leovaldez6280 nice, hopefully it'll go well
What are the compatible switches for this kb?
Mostly 3 pin switches, like akko or ktt
BTW, where did you buy the sticker on the side of the keyboard??
I forgot to link it, but it should be there now in the description
Hello po pwede ko bang malaman if yang k620 mo na galing sa link na included sa shopee at lazada eh white na blue switch yan or white na red switch?
Di ako sure sa lazada, pero yung sa shopee may options na red, blue and brown switches assuming na may stock pa. Sa shopee ako nagorder at kung anong link sa description, dun rin ako nagorder
Red switch yung akin, red at brown switches lang kasi yung hot swap. Yung blue daw hindi
Can you turn off the led
Yes
Say, if I did this mod, except the lubing because I had blue switch instead red switch, will it sound different too? I bought the same keyboard as well.
It should sound better but I think you can't do the PE foam because blue switches are not hot swap. But you can still do the other mods without any problem
@@Burpling00 wait, blue switches are not hot swappable? I'll check mine later.
@@eraae7439 i think so, I asked the seller and that's what he said
@@Burpling00 sir naka blue switch din ako,tinry ko tanggaling yung switch ng aken natanggal naman 😅tas kapag wiiwiggle mo sya nagalaw-galaw
@@alexanderresurreccion6710 nababalik mo ba at gumagana? Depende na ata sa makuha kung hot swap o hindi
can I use card board instead of eva foam?
I think you can, it would still have the same effect
Can i replace other stab like cherry instead of stock stock ?
I'd like to think that it would support it, I did change out the stabs to some everglide stabs and there were no problems
@@Burpling00 Is space bottom 6,25u ? the others is 2u ?
@@inhhuyho1041 yeah
Helloo, did anyone know how to lock the arrow key? Or how to use arrow key without pressing the fn button? It's kinda annoying for me XD, thank youuu
Unfortunately there's no option to lock the arrow keys
what switches did you install?
I used akko jelly blacks
Hi po same po tayo ng keyboard, brown switches hotswappable.. pero once na inopen kopo yung kb it's soldered.. is it really hot swappable? I don't have a tool like yours yet so i can't risky-ly pull the switches out
It should be hot swappable. But there are some versions that even the brown or red switches are soldered
@@Burpling00 do u have the same pcb the same as this one
th-cam.com/users/shorts2FwYSuT8vQU?feature=share
Mine is like that but k620.. he said he will do an update if still works but i dont see an update... Im scared to try his way
His is leaven aswell
Ummm.. update xD
I asked the shop they said that it was done like that so that the switches are more stable but it is hotswappable.. so yeah ill wait for the tool for safer extraction
@@myggych.4996 nice, hope your mod goes well!
@@Burpling00 thanks!
hello :) i need help po with the stabs, i tried removing it and using nail clippers muna pero nung binalik ko lubog na po yung keycap (space bar)
it’s my first time modding so i don’t know what i did wrong huhu
I think you put the stem of the stabs in the wrong direction. May two sides yan, one hole at two holes. Kung san mo ipapasok yung wires sa housing dun dapat nakaface yung two holes
@@Burpling00 thank you! i didn’t know 2 sides pala siya, thank you for your help :))
@@mochicakez glad I could help! Good luck with the mods
why is yours red switches mine is blue??
There are other options when buying the keyboard, red, blue and brown switches
how did u pull out the switch so easily
The first time I pulled it out was actually really hard too. In the video, I disassembled and assembled it a couple of times, that's why it looked easy
@@Burpling00dang i had use to the knife to pull it out kinda dangerous
Hi, compatible kaya Gateron G Pro Switches?
I don't think it supports gateron switches
It is hotswap but i just broke the switch because its so fk tight and hard
Yup, happened to me too. But I was replacing the switch anyway so it was no problem for me
bro try to mod the redragon fizz
Thanks, I'll try when I get enough money
Hi, Burpling. Can i use a thick cardboard instead of foam? because im having a hard time finding those type of foam hehehe
It could work, haven't personally tried it but if it's the only thing you can find it's better than nothing I guess. You could technically also use tissue paper
@@Burpling00 Thanks, Burpling. I guess I'm gonna use some pennies then cover it with tissues.
@@meowwyawa3334 i suggest taping down the pennies so they won't rattle inside the case
@@Burpling00 Thanks for the suggestion hehe. I'm gnna start modding my k620. Nice video tho, automatic sub 👍
How to fix bro
di na masyado nag fufunction masyado yung W which is pinaka important key pa kailangan ma diin pa minsan para gumana pero minsan di na nanapindot what do u recommend sayang naman ilang months palang
Tinaggal mo yung switch? Baka nabent yung pin niya
@@Burpling00 how to find it bro sayang naman yung mkb eh di ko na magamit talaga ng maayos what fix pwede
@@Burpling00 di ko tinanggal bro default pa lahat
@@johnandrei5924 baka sira yung switch, assuming na hotswap yung keeb mo. cheapest option is bili ka ng switch remover, tanggalin mo yung switch sa W at itry mo sa ibang key. If same problem rin, baka kelangan mo bumuli ng bagong switch. Cheap lang na man yung mga outemu switches sa shopee
@@Burpling00 Pag bumili bako ng switch kailangan lahat palitan? Di ba pwede sa Sira lang I mean sa W lang sir
how to disable RGB on this keyboard? 😅
For the rgb, it's fn+\
The side rgb fn+]
for example i disable rgb, will it remember after disconnecting the cable & plug in back?
@@miniminized only for the main rgb, the side rgb goes back to default after disconnection
tfw when pbt keycaps cost more than this kb
true but gotta say it looks good tho, and it helps out with the sound too. There are also cheaper pbt keycaps out there around the same price as the keeb
can i use 5 pin switches for this keyboard?
No, only 3 pins switches that support outemu sockets like akko, ktt or outemu switches
@@Burpling00 which is better? outemu reds or black?
@@kamutehhh1152 they're pretty much the same except for the spring, blacks are much heavier at 65g while reds are only 50g. If you want a heavier switch just go with blacks
@@Burpling00 thanks bro
what switches are compatible
Akko and KTT switches, those are the ones that I have tested
Pwede po ba yung outemu switches dito?
Yes, pwede
@@Burpling00 salamat sir