I just crossed the 1500 round mark and have had zero issues with mine. No matter what manufacture magazine or ammo I have used, it has never failed to chamber and fire a round. The Extar EP9 is an insane gun for the money considering (for me) its reliablity. No, it wouldn't be my choice to storm a castle or somethign but for plinking and home defense, this thing is a crazy value. People can spend 5X the money for their B&T 9mm carbines and I will chuckle all the way to the bank.
Riley, thanks for covering the Extar so much. Yours are the only videos that are talking about long-term usage. Some might complain and say "8,000 rounds isn't a high-count for a pistol", but I don't see those people buying the ammo and posting the videos. For many others, 8,000 rounds is more than they'll ever run through a gun.
Just sent them my money for mine. Cannot wait to run my own test but your video as well as others convinced me of its value. One word I would caution you on. Over luring a fire arm can cause malfunctions and wear. Especially if you live in dusty environments. I was stationed in the desert of Arizona as a US Marine. And to much lube traps sand and dust even insects. Now if you live in wetter conditions more may be needed but to much can trap moisture as well. A nice thin coat keeps rust away and helps getting dust buggers in your mechanism.
Your first videos about the EP9 were a major encouragement towards my getting my own. Once I got it, I had no malfunctions at all for about the first 900 rounds. But, finally following the recommendation on Extar's website to shoot Tulammo (steel case), I started to have some malfunctions, and the trigger action became clunky. So I got a new, steel trigger (Palmetto State Armory Enhanced Polished Trigger) -- and metal ambi safety to go with it -- and, though the first range session had just a few malfunctions, in my second session -- 200 rounds -- I had no malfunctions at all, and the trigger lost its clunkiness. So, no more steel cased ammo for me!
Customer service is worthless at Extar. They won't honor the warranty. About 500 rounds through the gun and the firing pin binds in the bolt causing light strikes. It's useless now because I used reman ammo. Like anyone can afford new ammo for the range
Riley, really appreciate the thorough review. Is the charging handle tough to pull back, and if so, does it get easier with more shooting and use? Thanks.
I like mine so much i bought a second one. This gun, some pop up sights and blazer ammo, at 25 yards, my wife, son and i all had the shot group of a silver dollar.
Word of warning to you people that have braces on your "pistols" put pistol Optics on the weapon don't put rifle Optics (short eye relief) this will clearly expose your intent of the weapon.
Please keep posting on the EP9. I expect all the ammo is not a cheap date. Would love to see a tear down and wear inspection as you did at 5000 rds. Hope to see you again at 10,000. You are the only source of long term use of this platform, PLEASE DON'T QUIT NOW?
I have my Extar on order. I dont think I will ever reach 8,000 rounds! XD I have the angled front grip already here and a nice red dot. Thanks for the update on how things are going. Good luck on the new job!
8k rounds that's awesome, most people dont run a gun that much. I was still kind of shy of buying these but if you've made it to 8k I've got no reason not to. Thanks for the video!
8,000 rounds - good enough for me. I've owned one for probably a year and half now - it's fantastic! Mine's set up as a home PDW - with a Holosun HS510C, Olight PL-2 Valkyre, and a KVP linear comp.
I bought one a few months ago.Thank you for the reviews. I am wondering why you are cranking on the scope adjustments in this video in what I can best describe as willy nilly?
Love your videos on this gun. You’ve helped make up my mind to buy one. As far as failure goes, I only use brass anyway, but cheaper steel rounds are good for range type fire. I think it’s the best budget buy 9mm option for AR type platform out there. I own a Glock 26 & 36, Sig Sauer P365, Ruger LCP, Ruger 556 MPR, and a Mossberg Maverick 88. This will be a nice addition to a quasi budget (but sure fire dependency) collection which I’ll eventually leave to my daughters.
I have had mine for 15 months, (no big rnd count) of this example of one' the only problem is FLAT nose ammo. the flat nose will actually jam into the lower and a hair to the right of the breech face. It does not do this every round but id did do it more the twice' BUT It shoots all round nose flawless and smoothly. I think the only draw back again' on my sample of one, it is very heavy maybe even a little sticky Charging it. maybe just being wimpy? NOT.
How Long did it take you to shoot 8000 rounds through that pistol with one magazine? How much did that cost in ammo vs the cost of the gun and Extra magazines??
I shot 8,000 rounds in a little over a year, I have lots of mags for this pistol I just only took 1 with me to the range that day for some reason. Buying bulk ammo is cheaper
Just the fact that he's Young Hays put 8000 rounds through a cheap gun and can report on it's amazing I mean I'm all about guns and all kinds of guns and I kind of want one just from hearing him talk about it and the great thing about it he's a good guy I look down the comments and he answers everybody! Great job... You're a good guy and honest
Still trying to score. These things go fast. If you don't respond to the email notice within minutes...forget about it. And you really never know when they will come. No particular day or time. 🤔
I got my Extar 3 weeks ago. Everything was working fine until I opened it, removed the bolt to see through the barrel to zero my red dot, closed it without the bolt and when tried to open again, it just wouldn't. I tried to disengage it several times to no avail. Called Extar and they said to use a rod and push back the buffer to disengage it. Tried that and still can't remove the upper from the lower. Really frustrated by now. Any ideas from any of you that have found themselves in the same situation? Greatly appreciate any feedback that can help me resolve this problem.
His gun is still jammed to this day lol ...I've seen this comment on a few ep9 videos. Somebody help this fine gentleman unjam his gun for the love of god
Good video. Is there a way you can do one more video of the internals and wear you have seen? Also maybe if the trigger and safety feel different from 1 to 8k?
Riley, I have missed what type of 9mm you have been shooting. FMJ, HP, truncated, a mix of all....don’t know. Maybe I just missed it and I would like to know.
Thanks for the response. Really thank you for all your testing. I like your nothing fancy format with lots of information. I get a chuckle when people say but it’s plastic while saying it takes Glock mags. Ha ha. 20 years ago their fathers complained about the Glock being a plastic firearm. Good luck with the new job.
I need help! I am on my second pair of sights. On both pairs the front sight goes right on the rail no problem. But...on both pairs now the rear sight wont fit on the rail? Is this a real Picatinny rail? Can anyone help me here?
No thanks? I own a CMMG Banshee. I know it cost a lot more. If I was going to buy a cheap 9mm AR platform pistol. I would go with a $640 Foxtrot Mike. At least you get all metal construction and just as good or better reliability. With all mil spec AR features. Not this $200 less plastic gun. That is limited on upgrades. No matter what you do you are stuck with a plastic picatinny rail and plastic frame. Foxtrot Mike all day and any day over this Mattel toy plastic gun
Might not be “designed” that way but I see people hit man sized targets with 9mm glocks at 100 no reason why you can’t reach out and touch someone with this bad mama jamma!
Never heard that before. Nothing but good things. Well as long as it only happened once really wouldn’t worry about it. Always seems to be a friend that has the problem.
More details, please. Did you witness the event? Was your friend using reloads? Was he shooting normally, or bump firing mag after mag? The biggest downside to this or the CZ scorpion platform is it looks like the barrel is either screwed or pressed directly into a polymer receiver. This seems to be fine for normal shooting, but if the intention is to do multiple mag dumps, I personally would opt for either an aluminum AR receiver or steel like the AKV or KUSA model.
Thank you for your updates. This seems like a solid little gun. As a matter of feedback, I feel like the video could be way more concise as I only got about 1-2mins of true info here. :/ Also, what kind of groupings did you get out to 100yds? Do you have group sizes or pics?
WHILE.. its a great gun - its ALSO (confirmed directly) NOT +P RATED - like "any" of PSA's "FREEDOM" line or Foxtrot MIke (FM-equivalent) Line. Personally - I dont have the $$$ or time to waste on a "kiddie" toy - I want a REAL WEAPON!! SO, I nixed the EXTAR for a REAL WEAPON! I went with a FM 9! INCREDIBLE WEAPONS!!
You sound like a dweeb, any weapon that can go 8,000 rounds and counting without issues can most definitely cycle enough +p rounds to get you out of the shit, who the fuck runs +p target loads ? Nobody. My LCP isn’t +P rated it didn’t blow up in my hand and .380 is some of the most dangerous +p ammo to run, this weapon is most definitely not a “kiddy toy” and could run whatever you needed it to for that fucked up situation with a buffer tube and a 8 inch barrel it would be fine you’d have more of a reliability problem with under powered rounds then hot ones.
Sam Jayawardane because he keeps twisting his windage turret like a maniac. At 100 yards it’s not going to make 1” groups or anything close to that so quit twisting the piss out of the knob
Yeah for sure, that is what I was talking about in the video. It is all relative. 100 yards for my .308 bolt action is nothing. But for this little pistol it definitely isn't considered "close range"
![Unboxing - Extar EP9 [2.0?]](http://i.ytimg.com/vi/3JmrYMTqiiY/mqdefault.jpg)
![Unboxing - Extar EP9 [2.0?]](/img/tr.png)
I just crossed the 1500 round mark and have had zero issues with mine. No matter what manufacture magazine or ammo I have used, it has never failed to chamber and fire a round. The Extar EP9 is an insane gun for the money considering (for me) its reliablity. No, it wouldn't be my choice to storm a castle or somethign but for plinking and home defense, this thing is a crazy value.
People can spend 5X the money for their B&T 9mm carbines and I will chuckle all the way to the bank.
New subscriber brother ty so much is this a pistol or SBR
Pistol
Riley, thanks for covering the Extar so much. Yours are the only videos that are talking about long-term usage.
Some might complain and say "8,000 rounds isn't a high-count for a pistol", but I don't see those people buying the ammo and posting the videos.
For many others, 8,000 rounds is more than they'll ever run through a gun.
Thanks for watching, I appreciate it!
I agree with test pilot. You have the most videos discussing this weapon. I think my wife is going to buy this for my birthday. I can't wait
I have over 8k rounds on my Sig P226 what a gun after all these years. Wish the Extar uses Sig mags
Just sent them my money for mine. Cannot wait to run my own test but your video as well as others convinced me of its value. One word I would caution you on. Over luring a fire arm can cause malfunctions and wear. Especially if you live in dusty environments. I was stationed in the desert of Arizona as a US Marine. And to much lube traps sand and dust even insects. Now if you live in wetter conditions more may be needed but to much can trap moisture as well. A nice thin coat keeps rust away and helps getting dust buggers in your mechanism.
Got mine last week. Only put 3 mags (Magpulls) through it so far no problems. Love it!
Your first videos about the EP9 were a major encouragement towards my getting my own. Once I got it, I had no malfunctions at all for about the first 900 rounds. But, finally following the recommendation on Extar's website to shoot Tulammo (steel case), I started to have some malfunctions, and the trigger action became clunky. So I got a new, steel trigger (Palmetto State Armory Enhanced Polished Trigger) -- and metal ambi safety to go with it -- and, though the first range session had just a few malfunctions, in my second session -- 200 rounds -- I had no malfunctions at all, and the trigger lost its clunkiness. So, no more steel cased ammo for me!
Yes steel case ammo can give almost any gun issues. Even super expensive guns
Thanks for taking the time and giving us the many round review. Great gun for the masses. 💯
Appreciate your ep9 videos. Just got mine in and your reviews helped me go ahead and get one after searching for extar videos. Thanks again
Thanks for watching!
What distance are you shooting....that your twisting them dials that much holy balls lol. Your dialing them like your a sniper
It's a crappy amazon optic. Hard go zero.
Customer service is worthless at Extar. They won't honor the warranty. About 500 rounds through the gun and the firing pin binds in the bolt causing light strikes. It's useless now because I used reman ammo. Like anyone can afford new ammo for the range
What mags did you use I find the Korean mags don’t work.
Mostly magpul
Riley, really appreciate the thorough review. Is the charging handle tough to pull back, and if so, does it get easier with more shooting and use? Thanks.
Its not tough to pull back at all.
The bolt is not hard to move. It is just that little polymer handle. Take it out and sand it down to where it is easy and smooth.
**I am going to make a run and gun video with the EP9 just because I know you guys want it**
I like mine so much i bought a second one. This gun, some pop up sights and blazer ammo, at 25 yards, my wife, son and i all had the shot group of a silver dollar.
Good to hear!
I just bought my second EP9 too! Congrats. Best value in the gun industry PERIOD.
Word of warning to you people that have braces on your "pistols" put pistol Optics on the weapon don't put rifle Optics (short eye relief) this will clearly expose your intent of the weapon.
Been looking at one of these for years, nice review, 8000 rounds makes me more comfortable with buying this now
Do it.
How did you go about cleaning the ep9? The whole dry lube thing is confusing to me. Wondering what you recommend. Thanks for the vids 👍
After a certain point I just started using regular automotive grease on all moving parts and it works great, no issues.
@@RileyRR grease or oil?
@@afgh1408 grease, I use grease on all my guns. High temperature automotive grease. Works really good and stays put.
@@RileyRR thanks for the info
@@RileyRR what's the main difference between grease and oil?
Please keep posting on the EP9. I expect all the ammo is not a cheap date. Would love to see a tear down and wear inspection as you did at 5000 rds. Hope to see you again at 10,000. You are the only source of long term use of this platform, PLEASE DON'T QUIT NOW?
I have my Extar on order. I dont think I will ever reach 8,000 rounds! XD I have the angled front grip already here and a nice red dot. Thanks for the update on how things are going. Good luck on the new job!
Thanks I appreciate it!!
8k is allot for about anything, especially if you shoot multiple guns. Some rifles would be burnt by 8k, and most people won't reach that round count
You have a great setup. I'm wanting a PSA AR 9 but thinking you just sold me on the extar ep9. Good video dude 👍
Thanks!
@Dr Beechas just ordered this today.
@Dr Beechas been running great this whole time. Did you ever get one?
8k rounds that's awesome, most people dont run a gun that much. I was still kind of shy of buying these but if you've made it to 8k I've got no reason not to. Thanks for the video!
I bought one and love it.
8,000 rounds - good enough for me. I've owned one for probably a year and half now - it's fantastic! Mine's set up as a home PDW - with a Holosun HS510C, Olight PL-2 Valkyre, and a KVP linear comp.
Right on
Thanks for the review! Has the buffer retainer ever failed?
Nope :)
That’s nice of you to update us on this 9mm 8k rounds n good n honest reporting
Great video! Any updates? Is it stock, or did you replace anything like the trigger group?
Is the SB tactical brace that it comes with adjustable if you take it off and then put it back on at whatever position you choose for it?
Not adjustable.
Thanks for the Extar EP9 videos. Good job 👍 Glad to see you shaved the goatee and that mop of hair.
Thanks for watching! Yeah, the hair had to go :P
Question, Where did you get your iron and optical sights? Also the angled hand grip?
Got it all from amazon. Utg bug buster scope. Magpul angled foregrip. I forgot who makes the irons
I bought one a few months ago.Thank you for the reviews. I am wondering why you are cranking on the scope adjustments in this video in what I can best describe as willy nilly?
Just making small adjustments to better zero it in. I was shooting at 100 yards.
@@RileyRR Keep up the great reviews Riley. Thank you for taking your time and money to do a very thorough long term test of the Extar EP9.
How’s that muzzle device? Does it help with the rise? Have you tired without? JW cuz Guns so light?Thanks man 👍🏿
It's the muzzle device that comes on it, haven't tried without it. I'm sure you could put a better muzzle device on there
You got another subscriber! Even if your voice is monotone ! Nice reviews . Helps me make a decision . Looks so fun
Great video, and congrats on the new job
Love your videos on this gun. You’ve helped make up my mind to buy one. As far as failure goes, I only use brass anyway, but cheaper steel rounds are good for range type fire. I think it’s the best budget buy 9mm option for AR type platform out there. I own a Glock 26 & 36, Sig Sauer P365, Ruger LCP, Ruger 556 MPR, and a Mossberg Maverick 88. This will be a nice addition to a quasi budget (but sure fire dependency) collection which I’ll eventually leave to my daughters.
6:20. The bottom line...
Want one but can’t find one anywhere. Have some gun shows coming up and hopefully can find one.
Good luck!
Did you use aluminum or steel ammo?
Really considering getting one of this. Thanks.
60% steel 40% brass
@@RileyRR that really says a lot, 5k rounds of steel case... That's a ton
Can you do a video on how you clean your extar and what you use to do so?
I have had mine for 15 months, (no big rnd count) of this example of one' the only problem is FLAT nose ammo.
the flat nose will actually jam into the lower and a hair to the right of the breech face.
It does not do this every round but id did do it more the twice' BUT It shoots all round nose flawless and smoothly.
I think the only draw back again' on my sample of one, it is very heavy maybe even a little sticky Charging it.
maybe just being wimpy? NOT.
Wally, don’t let the beaver shoot it. I’ll tell June.
How long was the wait after you ordered it?
5 days
@@RileyRR I got mine 2 days ago it was ordered last Thursday so far I like it even tho I haven't shot it
@@Bigdaddyslasher took me a month.
How Long did it take you to shoot 8000 rounds through that pistol with one magazine? How much did that cost in ammo vs the cost of the gun and Extra magazines??
I shot 8,000 rounds in a little over a year, I have lots of mags for this pistol I just only took 1 with me to the range that day for some reason. Buying bulk ammo is cheaper
Have you ever load a 9mm +ammo in extar ep 9 and what is safer grain?
Love the video and hope to get at least 1 more update on the gun. Considering getting one and an update with it this far out would be appreciated.
Great follow up review, you do a great job! 💯
Thanks!!!!
This gun has been on my to get list for about 1 1/2 yrs...what scope are you using in this video
Just a cheap entry level bushnell scope from amazon.
Just the fact that he's Young Hays put 8000 rounds through a cheap gun and can report on it's amazing I mean I'm all about guns and all kinds of guns and I kind of want one just from hearing him talk about it and the great thing about it he's a good guy I look down the comments and he answers everybody! Great job... You're a good guy and honest
***LEAVE A COMMENT OR GIVE THIS A THUMBS UP IF YOU WANT TO SEE A RUN AND GUN VIDEO WITH THE EXTAR EP9!***
Don't think I forgot about this comment, I am still going to do a run and gun video with this pistol, maybe this weekend :)
@@RileyRR did it happen?
👍
Still trying to score. These things go fast. If you don't respond to the email notice within minutes...forget about it. And you really never know when they will come. No particular day or time. 🤔
Yeah its kind of like Palmetto State Armory, they sell out super fast.
Nice video. 100 yds with this is plenty for me. I'm getting one.
Does yours feed hollow points? Mines doesn't
I got my Extar 3 weeks ago. Everything was working fine until I opened it, removed the bolt to see through the barrel to zero my red dot, closed it without the bolt and when tried to open again, it just wouldn't. I tried to disengage it several times to no avail. Called Extar and they said to use a rod and push back the buffer to disengage it. Tried that and still can't remove the upper from the lower. Really frustrated by now. Any ideas from any of you that have found themselves in the same situation? Greatly appreciate any feedback that can help me resolve this problem.
Take the buffer tube off.
His gun is still jammed to this day lol ...I've seen this comment on a few ep9 videos. Somebody help this fine gentleman unjam his gun for the love of god
Good video. Is there a way you can do one more video of the internals and wear you have seen? Also maybe if the trigger and safety feel different from 1 to 8k?
Great idea! I will make that video soon!
I’ve probably put about 1000 through mine but it’s been holding up well! Have you ever ran +p through it?
Yeah lots of +p. Never had any issues
Riley, I have missed what type of 9mm you have been shooting. FMJ, HP, truncated, a mix of all....don’t know. Maybe I just missed it and I would like to know.
Yeah a mix of everything, 115 grain 124 grain, steel and brass
Tulammo
American eagle
Blazer brass
Thanks for the response. Really thank you for all your testing. I like your nothing fancy format with lots of information. I get a chuckle when people say but it’s plastic while saying it takes Glock mags. Ha ha. 20 years ago their fathers complained about the Glock being a plastic firearm. Good luck with the new job.
Will this take a glock 50 round barrel magazine ?
I just heard no from someone else.
I need help! I am on my second pair of sights. On both pairs the front sight goes right on the rail no problem. But...on both pairs now the rear sight wont fit on the rail? Is this a real Picatinny rail? Can anyone help me here?
Is the rail too big and are you using back up sights?
Today, that would be $4,000 in ammo
Today its like 6000
I realize it’s not ideal but how bad would it be shooting without ear protection in a pinch
Depends, even 100 rounds would make your ears start ringing
So, what front grip style is that? Do you have the manufacturer and part number?
Magpul angled foregrip gen 1
Whats with that scope smh
?
Thanks for the review..you still happy with it??
Yes, it's still a great gun, still worth it.
@@RileyRR thanks.. thinking of picking one up..the PSA px9 is real tempting
Both are great options!
@@kwmulliganDude I'm having a hard time choosing between this or one from PSA. Did you ever get one yet?
Nice review I subbed. hope to see more from ya 👍🏻
Thanks I appreciate it!
How is this gun doing? Do you still have it?
Still going strong, for what it is, I still recommend it.
What AFG do you have on it?
MAGPUL AFG. GEN1
is it illegal to put a MOE stock on it and a vertical foregrip?
I'm pretty sure that would make it into a SBR. Which would require a tax stamp
@@RileyRR both of them? or just one?
@@philthethotdestroyer4194 no stock, no VFG. AFG and pistol brace if possible. Otherwise, tax stamp for SBR.
What is the furniture you are running at the bottom of the hand guard ? I’d like to get one for mine !
Gen 1 Magpul AFG
Great video brother congrats on the new job
Thanks!
No thanks? I own a CMMG Banshee. I know it cost a lot more. If I was going to buy a cheap 9mm AR platform pistol. I would go with a $640 Foxtrot Mike. At least you get all metal construction and just as good or better reliability. With all mil spec AR features. Not this $200 less plastic gun. That is limited on upgrades. No matter what you do you are stuck with a plastic picatinny rail and plastic frame. Foxtrot Mike all day and any day over this Mattel toy plastic gun
I hear ya, thats a great gun!
What is the grip, how much, and where to buy friend thanks?
Magpul AFG
What about cleaning and lube?
The takedown is similar to a regular AR15. I clean and lube it just like my other rifles
Have you ever tried JHP/Hollow Points on a EP9? My Moms jammed up 5 times
Never tried, I normally just used fmj
@@RileyRR Thanks for responding Bro...if you get a chance just try to chamber a round & see if it sticks
Will do!
Is there a way to put a folding stock on this gun
Not that I am aware of.
Love this gun
One or two clicks on a vortex and you'd be way off at 75 yards let alone a turn and a half
Hey could you measure and tell me what the diameter of the hand guard is please?
Thanks Riley, it dont look like they are even going to sale the other two mdels! Bummer
Might not be “designed” that way but I see people hit man sized targets with 9mm glocks at 100 no reason why you can’t reach out and touch someone with this bad mama jamma!
Yeah you could push this out to 300-400 yards and still be lethal
lets be honest though. If you shoot someone from 100 yards away 99.9% of the time you are going prison lol. But i get what you saying
A friend of mine just had this gun blow up in his hands. Completely destroyed the firearm
Never heard that before. Nothing but good things. Well as long as it only happened once really wouldn’t worry about it. Always seems to be a friend that has the problem.
More details, please. Did you witness the event? Was your friend using reloads? Was he shooting normally, or bump firing mag after mag? The biggest downside to this or the CZ scorpion platform is it looks like the barrel is either screwed or pressed directly into a polymer receiver. This seems to be fine for normal shooting, but if the intention is to do multiple mag dumps, I personally would opt for either an aluminum AR receiver or steel like the AKV or KUSA model.
How much did you spend an animal? 1600 maybe
Thank you for your updates. This seems like a solid little gun. As a matter of feedback, I feel like the video could be way more concise as I only got about 1-2mins of true info here. :/
Also, what kind of groupings did you get out to 100yds? Do you have group sizes or pics?
Can you run +p hollow points through it ?
yes
What brand angled foregrip do you have on it?
Magpul
Poor guy reusing the same mag over and over.
I'm nothing but a humble peasant with 1 mag
DONT use the RWB 33 rd mags there junk !!! AMEND2 34rd mags work great or Glock.
I got about 1000 rds thru mine Love it, let me borrow some ammo 🤣😂🤣😂
WHILE.. its a great gun - its ALSO (confirmed directly) NOT +P RATED - like "any" of PSA's "FREEDOM" line or Foxtrot MIke (FM-equivalent) Line. Personally - I dont have the $$$ or time to waste on a "kiddie" toy - I want a REAL WEAPON!! SO, I nixed the EXTAR for a REAL WEAPON! I went with a FM 9! INCREDIBLE WEAPONS!!
You sound like a dweeb, any weapon that can go 8,000 rounds and counting without issues can most definitely cycle enough +p rounds to get you out of the shit, who the fuck runs +p target loads ? Nobody. My LCP isn’t +P rated it didn’t blow up in my hand and .380 is some of the most dangerous +p ammo to run, this weapon is most definitely not a “kiddy toy” and could run whatever you needed it to for that fucked up situation with a buffer tube and a 8 inch barrel it would be fine you’d have more of a reliability problem with under powered rounds then hot ones.
how many consecutive rounds can be safely fired without heat damage?
Where did everyone get there’s??
It's only sold by the manufacturer, Extar. They're (I assume a small business) located in Lake Havasu, AZ.
Subbed. Hope you do some cool stuff
Thanks!
Thank you, get some sleep!
Riley, i like you and your vids, but your voice is like anti-excitement.
I know I have a monotone voice. 😄
Jeremiah Scherer LOL I have a voice like that (monotone) so I completely understand this comment hahaha
@@RileyRR hey Riley, you do you, bro. I think you rock. And I appreciate your laid back style.
Jesus man, put some hearing protection on.
I had earpro on. Foam earplugs
YES BUT! Can it handle a steady supply of 147gr. +P ! THATS THE TRUE SIGN OF QUALITY-BUILD!! WHATCHA THINK? THINK IT COULD HANDLE HEAVY +P's ?!!
: ))
I honestly do think you could handle those but I will try those out sometime soon
I understand it is +P rated.
You said all that and didn’t show your groups. Dislike.
Have a great day!
Sam Jayawardane because he keeps twisting his windage turret like a maniac. At 100 yards it’s not going to make 1” groups or anything close to that so quit twisting the piss out of the knob
100 yards may be considered long range for a 9mm, but overall, 100 yards is NOT long range.
Yeah for sure, that is what I was talking about in the video. It is all relative. 100 yards for my .308 bolt action is nothing. But for this little pistol it definitely isn't considered "close range"
I wish I could Thumbs Down more than once.
I wish I could care what you say.
For anybody watching around the time of this comment, Extar has these available again! Ordered mine today :D