Build: The CL1 Vannystyle (with CaptainVanover)
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- The CL1 Vannystyle with FETtec is Vanover's new ultimate freestyle kwad! In this video he’ll walk you through the build step by step!
Get the DIY kit here: rotorriot.com/...
Don't want to build it yourself? We build and tune drones so you don't have to! Get this drone pre-built here:
rotorriot.com/...
#FPVFREESTYLE
- - - - - - - - - -
Support Rotor Riot by purchasing from our store:
rotorriot.com
Want to fly FPV like the pros? Start here:
learn.rotorrio...
Looking for a PC to run the latest sim? We've got you covered:
rotorriot.com/...
Get Rotor Riot Apparel here:
rotorriot.com/...
Get Rotor Riot Motors here:
rotorriot.com/...
Get Pre-Built Drones here:
rotorriot.com/...
Check out the latest FPV Parts on the market:
rotorriot.com/new
Would you like a monthly goodie box?! Check out Kwad Box:
www.kwadbox.com/
- - - - - - - - - -
- Hosted By
Alex Vanover [CaptainVanover]
/ @captainvanover
-Production Team
Drew Camden - Producer
Christian Kapper - Editor / Camera
www.rotorriot.com
Huge thanks for RR & Alex for making this video. They are a few videos about the Fettec stack that I know. But not a complete build video start to finish. And that is what makes this video special. Huge appreciation to RR & Alex for taking time out of there busy schedule and making this video. It will help a huge amount of builders like myself & the community. Again thanks a million guys😀
Take a shot every time A dawg says LIKE SO 🙏🏻🤣
I tried this.. lost my eyesight at about 18min then woke up naked 3 days later in my garden.
I like this build video much more than any others that I have watched because he doesn't spend an unnecessary amount of time over explaining each part and each step makes sense... thanks for the vid :)
Me watching the whole video knowing that i cant aford it :D
I watched the whole vid knowing not even what am I watching
@@tahjibrahman8364 lol same
I can't even fly this in Australia, and I can't afford it.
Same
Same
Something something. Like so. Something like so. Something like this lol 😂 good build
😂😂
once you notice it and can't be un-noticed o.O!
Don't forget the actually
You didn’t list the PIDs or rates in the description !
I think you can find them in the rotor riot store along with the other pilots
The pids and rates don't appear in the description.....
I will advise you to invest with manager kingston and earn huge like I do and he's currently handling my portfolio earning 200% profit with his strategies and guidance's you will achieve alot
HIS AVAILABLE ON Whats App ASSURED
+_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅
@@user-sy3qf2se2o your account seems to maybe gotten hacked?
Awesome build tips !!!!
I have 2 suggestions when mounting the vista or 03's with VHB use two piece of VHB and leave a space or channel for air circulation under the vista .
Second, if anyone is objectionable to not using the two standoffs in the rear, you could drill a single hole in the center of the frame in the upper and lower plate, and use one standoff in the rear, which would give a decent amount of structural rigidity back to the rear box of the frame.
Thanks for the bill tips Vanover I love to watch different peoples build suggestions !!!!
I just bought the cl2 and am about to embark on my first fpv build. I really have enjoyed all these build and flying videos you guys make. Very informative and entertaining.
It´s not recommended to put the capacitor on the end of the battery wire. It should be as close to the ESC as possible!
90% of build have the cap connected to the XT. No issues.
This is technically true but unless your black boxing to log voltage spikes none of us are going to know the difference
@@Vizr my XT60 caps got quite hot after normal flights, added a small extra cap directly onto the ESC, no more issues. If your XT60 wire is short (like in this build video) you might be fine, with longer wire I don't recommend it.
@@NickBusscher I’ve always ran 14 gauge XT60s on power pads with 330uf caps and have never had a heating issue. I run the FETTEC 35a esc exclusively.
@@brendand.2269 untill your ESC burns out;)
One of those lock nuts is a different blue, triggering my OCD. Really tempted to try out the FETtec.
Don't waste your money
Waste your money... Not .. It's great been using for 6 months ..
Follow on how to build FETTEc properly and never look back.
@@Vizr you still can't just solder or plug your vtx to the fettec fc or do you? Do you still need the osd and pdb? I simply dont have enough room for that in my reverb.. would love to try ot out though
@@100100freak Before I switched to digital, I ran telemetry warnings instead of OSD. However, I do have a FETTEC osd board I was going to run in an analog set up but it’s no longer needed because I’m switching to shark byte. I’ll be posting the parts in FPV groups on FB soon.
And yes VTX plugs onto FETtec FC. Very easy.
In no time FETTEC SOLD OUT EVERYWHERE!!
Race day quad
Thats because everyone who flys it has to buy replacements every few flights lol
@@notsure1502 Nonono, I am ripping that Fettec Stuff with the smaller and lighter 35A Version on my 6S Apex Rig for at least 1 Year now (and I mean Ripping as you can see on my channel) and never had issues with Fettec. It´s ultra-reliable and the ESC holds up well even when I lose patience while turtling it out of heavy Tree branches ;)
@@LuckyRotorsFPV I'm happy for you and your $1000 beater
@@notsure1502 Hehe nononono not $1000000 it´s only 350-400 Bucks Bro
great info, I like you highlight the often skipped parts.,
the random hardware.
yeah, the camera is moving a bit... but I can deal and it keeps some energy...
like "dampen..."
will go back and rewatch for sure, even if I don't build this exact quad.
Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's
AVAILABLE ON Whats App ASSURED
+_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅
CLI Dump?? No Link in the description. Please add.
Appreciate your review feel free to contact me for assistance and further details information
AVAILABLE ON Whats App ASSURED
+_1_2_8_1_6_4_3_6_1_3_3 For trading guidelines
I haven't been back to rotor riot in a couple years or so who is this man where the boy used to be
Great build video. Love my Fettec build. Happy flying. 🤓
Where are the PIDS, cli dump, rates ... please add to description :-)
Sweet build 🔥🤙glad to see this episode. Love Rotor Riot ❤
Always interesting to see how everyone builds 👍🤘👊🙌
bout time some of you fellas started to venture into the FeTTec world ....welcome to the real deal !!
Please dont shoot build videos handheld, this gave me motion sickness lol
and you're into fpv?? gotta deal with that motion sickness lol
@@LutherFPV I expect it on FPV, not when I'm sitting on my ass watching youtube lol
I liked it shot like this because with a static over head view you dont always get a good perspective of what they are doing. This way the camera man could get the best angle and zoom in. If you want it done a certain way do it yourself, dont try and make others do it the way you want it done. The world doesnt revolve around you.
wait...so do you chase after your own kwad when flying fpv? ngl great idea for a hardwired video feed
@@r3ck17rick7 You dont? That's how I train
You don’t need to go back and forth between KISS GUI and FETtec configurator to check motors. You can do all ESC setup (except ESC orientation) on the FETtec configurator. Motor test is under telemetry page.
Nice video Van
Wheres the tune?
Did Alex have church scheduled after this shoot? Looks too formal to slap a drone together😂
Or a date????
@@robertfpv4043 Date with Drew for the poo!!
don't know which church you're going to. but that is not a formal shirt for church or any event. it's more like casual.
You mean he just doesn't look homeless, like the rest of them? :-D
like so
Lol I soldered my bat leads backwards on my first build too! It’s like a right of passage.
Nice build Vanny. I like how you’re making it pretty light and yet it’s dji with some little extra beef in the motors
Yeah uses a crazy heavy frame and heavy motors and kwad skids and somehow he still comes out at 630g au.
This frame Rocks i'm on my second build with it
I totally believe the 630g without go pro
Mine is 661g RTF with gopro session, Jb f7 flight stack, tbs unify pro hv, newbee drone flow 2306.5 2450kv motors, foxeer trex micro, tbs rx, talon faf series 1300mah 125c 5s lipo 175g, rotor riot skids session and sma mount
I used 25mm stand offs and dropped top deck down 5mm
UAv tech pre sets with some minor changes
so i have around $375 into the quad its a bad mofo on 2450kv motors 5s cut to 90% in beta flight
Cool build! Nicely explained in your video.
NO PID's that’s bull S.....
Where is the link to the pids?
great video bro! just getting started and this has helped guide me in the right direction!
when you gotta build a drone and make it to H&R block in 45mins
Where are all the Links ? For kiss gui and for pids and rates ... le drib put the proper Links please
Just use google, these type of things get updated constantly anyway.
Well that was very helpful
Great Build Demo!
How do I find Vanover’s tune.
43:12 Alex: click ”I know what Im doing”
Me: ....🧐..... ’Click’ 🥴🥴
Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's
AVAILABLE ON Whats App ASSURED
+_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅
Wish this one have analog version kit.
At least the kit should have the option.
Awesome to see a complete Fettec build video. How are you mounting the gopro Alex?
Super Clean build, loved it. Also Kiss software seems quite nice.
Jo, where can i get your PID‘s. I‘ve orderd a build pack. But i will also test your settings. I can‘t find this link in the discription.
Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's
HIS AVAILABLE ON Whats App ASSURED
+_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅
Pid’s ? where are they ????
Link to pids mentioned in video?
Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's
AVAILABLE ON Whats App ASSURED
+_1_2_8_1_6_4_3_6_1_3_3 Do well to let him know I referred you to him his strategies are top notch✅
I'm really curious about the FETtec stack. Back to KISS
Good job on the build video, Alex!
Even though I don’t have the money to build this quad I’m glad I watched this because I got one amazing tip from it. I ordered some of those fc isolation rubber screws and they work amazing! That one thing alone cut my prop wash in half at least! Thanks!
Soooooooo..... where is this whole cli dump????!!!!!
Nice build with a twist
Thanks, you are the man on this stuff - from Mantis max>
Looks like a clean build. I've ordered the same FC and ESC for my Armattan Badger. I do have one question though. I've noticed that FETtec recommend using a Spike Absorber for that ESC. They didn't have any in stock anywhere so I haven't bothered buying one yet and I noticed they aren't used on this build. Are they important or worth getting or not?
Hi Alex, how about a Parts List and your pids and rates?
Thanks for commenting,I will refer you to trade analyst and, accountant to make good income, go more on digital asset's
AVAILABLE ON Whats App ASSURED
+_1_2_8_1_6_4_3_6_1_3_3 For trading guidelines
Sorry, but i don‘t use WhatsApp.
@@patriciascheer6531 you can get what's app from your play store
Ja, thanks I know! I don’t use it for savety reasons! Would be to Easy to put it in the video Description! Everybody does! JB, Steele!
Finally got your kit where can I find your PIDs? I don’t see them in the description.
3M or 3mm double sided tape?
Had three screws on my new build day before yesterday... I spent 4 horus last night repairing one of my motors because of that. It flew great till it hit the ground low and fast. Motor came loose twisted and broke all three leads so I had to take it apart find new motor wire inorder to extend the motor wires right from the stator. They don't make those motors any more and a new one was crazy priced. So ya.. imma stick with 4 screws bro lol
Alex talks so fast, TH-cam's auto translate subtitle tool is going nuts!
He’s speaking pretty clearly but the subs are just completely random lol
quicker he talks (takes off) the sooner hes finished, typical racer
that is hillarious...it isnt saying anything he is saying... for some reason mine came up on veitnemese autogenerate and that was even scarier because it was translating like he was speaking that language to English .. but all wrong of course...
“I like to save weight by using 2 motor screws.” Do you know how much those kwad skids weigh?!? It’s insane
Also they are using too long standoffs. They can use at least 5mm shorter standoffs.
@@mimarfpv yeah fir real. I truly don’t understand where they are saving weight here. Amazing they got the weight they did. I bet it’s not 630g
I tried 2 motor screws a while back, but I've actually gone back to 4 as I had a crash that which damaged the motor much more than it should of. It bent the bell on my new TOA Turbine 2306 motor but also broken the motor mount where the 2 screws went in and delaminated the carbon on the arm. My opinion is that with 4 screws it would of still damaged the bell, but the mounts for the motors should of survived from the extra strength meaning only needing to replace a bell rather than the whole motor. I think for a freestyle rig the weight of 8 more screws is not important.
Save weight lol! I have always run 4 and it has saved my ass more than once.
@@3000gtwelder me too. Only excuse for only 2 is on micros IMO
Thats gonna be my next frame💪🏽🔥🔥🔥
where's your tune?
They show it on WhatsApp! Happy FB! 🤯
Dafaq is a whatsapp lol I'm probably the only person that doesn't use these apps.
Ill get your logo tattooed for a set of DJI goggles.
Can 't find the CLI Dump link!
There is no!
like the 3 YT video they said they would provide the rates and PIDs... yet they have not... IF they arent going to provide them, or at least host them on their website. Why even say you will??? Rotor Riot????
I can't listen to this anymore... I'm leaving like so...
@@kylershepard2327 like so?
I'm going to put CRICKET motors on as they're exactly the same as Vanovers (except color) but cheaper according to RR.
Excellent build video very well explain. Than you
Why don't you use Fettecs Onewire connection?
Where are the PIDS? They aren't on the website...
As a florida boy hailing from melbourne I would love to fly with you guys and learn more about FPV. Im fairly new..only been flying about 3 weeks with my tinyhawk freestyle. All your videos are great and informative. You all rock.
cool see you out there
Thanks for this great build, learning a lot about Fettec and kiss!
Cool video helps A lot ! LIKE SO !
Can you guys make one where we can just buy this exact drone just pre built?
Sweet! I want to do THIS one. Any suggestions for an analogue option?
same question here, how would I go about making this analog.
Curious about suggested battery mAh, weight of the build, and all up weight.
Nice kwad
Need this badboy
You are better off with "acetate cloth tape", that is the black stuff and it does not come loose over time like electrical tape tends to do!
I watched the whole video in the search of rates, vanover told that dump file will be in description, but unfortunately I didn't found... If anyone can provide, I would be highly thankful..
For the FC to ESC connection is it better to connect for Fettec OneWire or for Dshot?
🤣🤣🤣🤣🤣🤣👌you made me laugh when you said that ....when soldering your xt60 place the lead in the hole to make it insecure instead of more secure 🤣🤣🤣🤣👌
Well, he actually said “Nice and secure joint”!
@@jeftesantiago nooooo I just herd it again two more times in the area 🤣🤣 it was insecure lol
@@philsm109rphilipstrom3 Let’s ask that to Vanny! He just was a little sick that day.
@@jeftesantiago it's okay 😁👍 no bid deal...just funny
@@philsm109rphilipstrom3 Yeah I know! 🤣🤣🤣😂😂😂Just for fun!
What props?
Nice quad build Vanny, how many motor screws does the DRL racer 4 use?
well, I would assume it uses quite a few, but im assuming vanover replaces them all with double sided tape in order to save that extra little bit of weight. (jk)
Well done Alex and all Rotor Riots guys. 👍 just wondering do you ship to Australia 🇦🇺?
i would love to have this drone. Sad that i cant afford it:(
Nazgul5 4s analog is the way to go
barely getting into this hobby, is this a good beginner setup considering its price?
(Go betaflight. At least at first. I would saw analog is good for beginners and pros alike. Much cheaper and easier. If u want a 5” I would get the Iflight nazgul 5!!) I would not recommend this as a first build
@DauntlessFPV thank you for the advice
29:30 you mean on the VTX?
I want to build this quad; but analog! thoughts?
I just ordered Fettec FC+ESC , i wanted to give it a try since quite a while ;D and you helped me to take the decision. Is it possible to see your pids/settings ?
@@adamjosey1543 i mounted the drone, but the FC seems to be dead...ffs at that price that's a pain in the ass. it is very weird, i cant connect to it, while i did activated and updated it, i think it might have burned cause of the air unit i'm not sure
@@adamjosey1543 there are only betaflight PIDs and Settings 2 find - where is the good fettec stuff??
@@snakeyefpv same here. did you finally managed to find the vanover's pids?
@@archonoff not really, but the preset's work well too...
Tempting me to try Fettec, but that 45a ESC costs almost twice much as my favorite FC+ESC combo. All their stuff is premium with price to match I guess
my friend that esc is the best esc in the industry right now. Flies like a dream
@@pedronhfd6969 Some think cause its 45amp it isnt as capable but that is WRONG. Id rather use this ESC than a zeus 60amp or T-motor 55amp pro or like wise. Would you also agree?
Question? I am just getting into my 1st build, I noticed you put Esc with motor solder terminals forward & reverse facing as opposed to left & right. Is their a specific reason for this or just protecting the wires in case of crash or impact?
Nice 👍 keep it up cheers 🍻
Hello champion Cool vídeo and subbed 🤜🤛👍🔝
what is the best to order for my cl1 kit im about to order
FrSky XM+
FlySky FS-X14S
❌ You mention that your PIDs and Rate can be found in the link below but there is nothing like that :) 🤷♂️
How many grams does it weight including battery and GoPro?
One mistake. There are no replacement pads for the connector that you used for Vista. I ripped it out, damaged traces, and now i cant use that serial port... You have the other two serials on the top, but in my case, they are occupied by crossfire and gps...
So, no replacement for that connector rx and tx, unfortunately... :(
where is the CLI dump with your settings? thanks!
i want it get more stock please. :)
Can you share your rates and pids for this setup?
Hi Van, sorry in the store not appear the rx tbs tracer option in a prebuild model contents.... And it not any mention about this.... How is it??
So all the links he mentioned? Just links to the shop hm...
Appreciate your review feel free to contact me for assistance and further details information
AVAILABLE ON Whats App ASSURED
+_1_2_8_1_6_4_3_6_1_3_3 For trading guidelines
@@user-sy3qf2se2o Dunno what that is :P Think most ppl would like google docs links ;P
@@MYGiTHSE write me on WhatsApp for trading guidelines ☝️☝️☝️
@@user-sy3qf2se2o that's the main Problem with Rotor Riot - it´s just another home Shopping Network
I have another question why you ain’t flew that thing we want to see