2005-2007 Infiniti G35 Rear Brake Pads and Rotors Replacement

Replacing the Rear Pads and Rotors on a 2006 Infiniti G35 Sedan. This procedure applies to the 2005, 2006, and 2007 models. EASY to follow DIY to replace your back brakes on your G35 on your own!
Product Links
Rear Pads and Rotors Kit : amzn.to/3zgUnIc
Carbon Fiber Infused Brake Pads : amzn.to/3XzrFMy
3lb Sledge Hammer : amzn.to/3OWTb1Q
Never-Seez : amzn.to/3NbRCwi
SIL-Glyde Brake Lube amzn.to/3CeCGqU
Akfix Brake Cleaner : amzn.to/4cn87zB
Latex Gloves : amzn.to/3J58YbI
24-Volt Impact Wrench : amzn.to/3r6mxBD
Starting Tool Set : amzn.to/3pDlpVI
Split Beam Torque Wrench : amzn.to/3J14wu2
100% Made in USA Jack Stands : amzn.to/3sgYkt5
Low Profile Aluminum 2 Ton Jack : amzn.to/45WR97a
*Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.

[@redalert206]

Great tutorial, appreciate the detailed info!

[@markchuchra8399]

I need some advice. I followed this flow on my 2003 G35 Sedan 6MT with 90K miles, replacing my rear rotors, pads, slide pins and brake hoses. I finished up with a 2-person brake bleeding at all four wheels, being careful to keep the brake flued reservoir filled with DOT3 Nissan brake fluid as we were going along. I had my wife doing the brake pedal pumping -- I think she might have gotten a bit aggressive with the amount of force on the pedal. While bleeding the second wheel, she said "braking seems to be getting easier" and we continued on to bleed the four calipers. After bleeding was done and I topped off the brake fluid reservoir, I started the car and depressed the brake pedal to seat the new pads. I noticed there was very little brake resistance and the pedal went to the floor! Uggh. What do you think may have gone wrong? Might my wife's aggressive braking during bleed operation have blown the master cylinder?! Or brake booster??

[@CarsYouCanFix]

Ahhh man, sounds like the seals blew on the master cylinder.