วีดีโอ

Plastuc drain plug ?!?

If it's not rusted out and seized...

The dealer said they charge ~$500 for this little bit of work. Ridiculous! Thanks.

Since replacing my rear W222 rear pads I get a squealing coming from the right rear when turn the wheel completely left. I pulled it apart and regreased everything but that didn't help. Any ideas?

Nice job👍

Cannot be done more quick easy and to the point, thanks

Crush Washers : amzn.to/3YNJlmK

Where do you get the new washer?

Impossible? Nah, most of us carry dead blows lol

Whats if i bought a new battery and car still doesnt turn

Whack didn’t use a torque wrench…novice

Appreciate the vid, helped me out insanely. First time working on a subi and it was easy as hell with this vid 🙌🏽

You saved me $200-$1400. Thank you. You, sir, are doing The Lord’s work.

I just did mine today. Start to finish was 4.5 hours. If I did it again, I could do it in 3 hours. Tips: remove alternator, some say you don't have to but it helps angles plus I couldn't get the water pump out with it in place and even swiveling it. Completely removed it. Remove the plastic shroud underneath, three 10 mm bolts and about five clips (push pull tabs). Buy a magnetic 10mm socket. The bolts are all 10 mm for the pump. Consider removing the motor mount and jacking up the Motor. I'd try it next time because fighting the frame rail was a total nightmare. Buy denso brand only. It's twice the price but ten times the quality.

Thanks for including all torque specs and maintenance reminder! Do you know if the oil change interval is set to 5000 miles or can it be adjusted for synthetic oil?

Super thanks

if any one has changed SIXTEEN plugs on a Hemi V8, they can do this very easily

You can always use 2 small c clamps to help push the calipers in using the old brakes as leverage as well, alternating top and bottom. Worked for me. Thanks for the video!

Using that method to push back the piston to remove the caliper could damage the ABS as you are inyecting pressure trough the brake line, you must deactive the ABS with a Scanner or loose a little the bleeder valve to release pressure as you push the piston.

Thanks for this video. Just changed mine and it took about an hour and 15 min for me. Saved a bunch of money too. Keep up the good work.👍🏽

Excellent mechanic skills.

This is why labor $500 dammit 😂.

Rewatching this almost 1 year later….guess what I’ll be doing to my 2014 Camry tomorrow? 🤣🤣

All meat no potatoes! Thanks for a simple and to the point video with no frills!

Finally, someone that does brakes properly. Nice job.

I've had/read multiple people telling me that this is a 3-4 hour job and they would just take it to the shop. I've change spark plugs on my old civic hatch before and I know Subaru is different but I was thinking to myself "No wayyyyyy". SO GLAD I FOUND THIS VIDEO BEFORE GOING TO A SHOP. Very straight forward and you didn't miss a step. TYSM! Earned a follow.

Thank you so much brother for this video

Carbon Fiber/ Ceramic Brake Pads : amzn.to/3UF6Q0d

Thanks for the helpful video👍

bro thanks for this video! you saved us some money that I can put towards our grocery 🙏🏻

Very helpful! Thank you

I think we should be able to change spark plugs without opening all this from top.

Hyper Dressing : amzn.to/4f44XCd

A lot of steps, but easy

Okay following your video it took me only an hour after all, and I got only 2 pocket screws and another that went missing. Success!

I just did this job with no video but I came to make sure I did right 😂😂

Wish it was this easy on an EJ255

Well done

Steel brush on piston seals? Brave

15mm Box End Wrench : amzn.to/3XSyc3v

very helpful! thank you

Do you still have to push in the pistons in the rear like you have to on the front caliper ?

you forgot to link the gease. i've heard there is a huge difference between the OEM and aftermarket stuff...

Why you make it look so easy?? Is it really that easy?? You make me want to work on mine now. Congratulations

Front Sway Bar Links : amzn.to/4843zgk

Actually thank you so much. Now I have idea how can do this my self. Last time I paid. 600$ hundred. Just for this service.

IF I KNEW i had to spend an hour disassembling the whole damn car for just spark plugs... I would have reconsidered this sale.

Great information..💪

Nice job, looks relatively simple for the DIYer 👍

I am not able to reach the last step. What is the issue? I don't see coolant flow up to the container in the last step.