Amazing job Peter as always. Funny because I just got my v3's yesterday haha. Will definitely have to try this mod. Thanks again Peter for sharing your genius with us all. Dave
Simhub is great, I have been using it for over a year now. Shakers, button box and dashboards. For the shaker you can use usb (laptop) soundcards for sound output they only cost $12.00. I use pyle 160 watt 2 channel amps cost $38-48.00 (black friday sale) The Dayton bst-1 50 watt shaker is plenty strong and only $39.00. You can build a whole two shaker system for under $200.00.
@@petermakesthings7342 wow! Thanks for your reply. I just want to say you are insane with what you do, so much work, dedication, time to develope etc. Really great work! Keep up! I will check your suggestion. Greetings from the Netherlands
@@petermakesthings7342 Very inspiring video, thanks for upload! I have T3PAs too and I want to add some feedback to throttle and brake pedals. I am not sure if I should use gamepad motors or small bass shakers on each pedal. I would think shakers give more detailed feedback, right? Or do you think motors are better for T3PA? Would like to hear about your experience, if you have the time. : )
@@jorn-jorenjorenson5028 t3pa's (not pro) are pretty light and plastic, for these I'd go with gamepad motors, much simpler assembly and feedback is pretty alright, the bass shakers might be a bit too heavy for your setup
Can you tell me if there is a way for me to put this bass shaker in place of the original by connecting this big bass in place of the small one by splicing the wires
I Love your great work..! Thank´s very much, that you share all your Awesome ideas with us..! Keep going….!! ….( still hoping to see your solution for Fan / Windsimulator mounting on the TS-XW ;-)
I have 6 of those shakers but every amp I use doesn't have the same effect as an aura amp. I am wondering what amp should be used for the shakers I see alot of car amps. I was using just a 50wx2 amp from amazon and it is usless so i will have to look into a car amp.. any recommends?
how do i set up each transducer to work as i want, i do not know how to pick which shaker does what OK so you show near the end i thank you so much, i have the reckhorn bs 200i for back of my seat and highly recommend it
Amazing job Peter as always. Funny because I just got my v3's yesterday haha. Will definitely have to try this mod. Thanks again Peter for sharing your genius with us all. Dave
Hi Dave, thanks a lot, and congrats on new purchase:)
I love this design. I bought a 2nd bass shaker similar to the ButtKicker & installed it underneath the pedal plate.
Very creative. Well done! 👍🏼
Thanks Peter, going to try this on my V3s.
i was thinking to put one under the pedals
Is anyone selling these?
You kept all this quite ;) nice work boss!
Cheers:)
@@petermakesthings7342 how do you connect the alpine amp to pc?
Thank you
@@brunosantos9637 2x "AmazonBasics 3.5mm to 2-Male RCA Adapter Cable"
Simhub is great, I have been using it for over a year now. Shakers, button box and dashboards. For the shaker you can use usb (laptop) soundcards for sound output they only cost $12.00. I use pyle 160 watt 2 channel amps cost $38-48.00 (black friday sale) The Dayton bst-1 50 watt shaker is plenty strong and only $39.00. You can build a whole two shaker system for under $200.00.
Are you still using it in 2024 petal?
You have a link for the amp?
I wish i could have this for my T3PA pedals from Thrustmaster..
I had these for some time and the gamepad motors actually work very well with them, check a video by amstudio
@@petermakesthings7342 wow! Thanks for your reply. I just want to say you are insane with what you do, so much work, dedication, time to develope etc. Really great work! Keep up! I will check your suggestion. Greetings from the Netherlands
@@petermakesthings7342 Very inspiring video, thanks for upload! I have T3PAs too and I want to add some feedback to throttle and brake pedals. I am not sure if I should use gamepad motors or small bass shakers on each pedal. I would think shakers give more detailed feedback, right? Or do you think motors are better for T3PA? Would like to hear about your experience, if you have the time. : )
@@jorn-jorenjorenson5028 t3pa's (not pro) are pretty light and plastic, for these I'd go with gamepad motors, much simpler assembly and feedback is pretty alright, the bass shakers might be a bit too heavy for your setup
@@petermakesthings7342 Thank you very much, very helpful to get some advice! : )
Another great mod 👍 might see if I can fit these to my pt-1 pedals.
Another 40 subscribers togo 😎
Nice pedals, I think this concept should work, just might need to tweak the design, feel free to write to me if you need any help
Can you tell me if there is a way for me to put this bass shaker in place of the original by connecting this big bass in place of the small one by splicing the wires
Im curious if this would be a fix for the throttle pedal since GT7 on PS5 has no output for the throttle. Only the brake works.
What are the dimensions if i get them 3d printed?. Is the model in mm ?
Genious!
Heh, thanks:) glad you like it
Plz link 12v psu
Do you think your 3d adapter would clear 2 pucks one on the brake and one on the throttle?
What size nuts and bolts to attach the Dayton Audio puck to the bracket? Thanks!
Got them, and figured I'd reply to myself since I answered my own question. M3 x 22mm worked great. got m3 lock nuts to secure em.
@@oliverturan9597 thanks! I hate when people post this type of videos with zero help in comment
I Love your great work..!
Thank´s very much, that you share all your Awesome ideas with us..!
Keep going….!!
….( still hoping to see your solution for Fan / Windsimulator mounting on the TS-XW ;-)
it's 80% done :) printing the button box today and will do the wiring in the next couple of days, then it's just finding the time to record a video...
I have 6 of those shakers but every amp I use doesn't have the same effect as an aura amp. I am wondering what amp should be used for the shakers I see alot of car amps. I was using just a 50wx2 amp from amazon and it is usless so i will have to look into a car amp.. any recommends?
A Footkicker
the only way that i would use it is on gas pedal, to feel when adding throttle, to be like in real car
When ABS activates in a real car, you definitely feel it in the brake pedal.
how do i set up each transducer to work as i want, i do not know how to pick which shaker does what
OK so you show near the end i thank you so much, i have the reckhorn bs 200i for back of my seat and highly recommend it
Hide the cables it will look that much cleaner
Is anyone selling these?