วีดีโอ

Three years later and I just ordered this. I will put tennis racket tape on it. I rarely put my fingers in any wheel.

Were you able to put the clutch paddle back ?

Hi is this new mod design is final and it’s working properly? I’m ready to buy Thanks

Vx pro brake broke today i said f it im trying these

Amazing video, very informative with easy to follow steps. However, could you send the link for the slim quick release, as I cannot find one that looks like yours. And I don’t want to order the wrong one.

When I saw this I put carbon tape on my old open wheel add on and bought some etsy lights for it.

Can I still get one of these? This is an old video?

Amazing video, I had those PS connectors and I was wondering how to solder them to the wires 😀

For a better authentic look I would use 7 segment display with 4 digits, but I really appreciate your creativity, thanks for sharing your ideas and projects!

Can u update the Hydraulic? Is it alot better?

i wanted a longer video a full assembly and all I like your video a lot will help me to decide if I want p1000s. I have clubsport v2 rn but I would always crash out in light braking zones, I looked in the control panel and apparently you don't even read brakes until full 100% travel with the damper design. So I realize I need to upgrade to be able to actually brake.

Very good video

Can you make a 7 speed one?

I’m interested in the code and assembly instructions! Still monitoring PayPal? I’d like to buy them!

I still cannot find someone who can make me one of these. HELP I want one.

No disappointing makes it affordable, its for sim racing .

Tried the soldering iron method, but it just wasn’t transferring enough heat. 20-30 careful seconds with a heat gun worked perfectly.

@Peter Makes Things Hi peter. So im hoping you can help as i have no idea about making my own 3d print desings. My question is i see you have designed spacers for the spring mod on the brake but those are for the none hydraulic version. Would it be possible to add print files on thingyverse for spacers that work on the hydraulic mod. I purchased the new spring kit from Simagic but it only comes with the washers for the none hydraulic brake so i need some washers for my hydraulic brake to use springs. From what ive seen the washers they send with the new p1000 hydraulic default version the washers look like yours but its like 2 of your washers on top of each other if that makes sense. If you could design me the washers for the hydraulic mod im willing to pay what ever for your time?

i almost needed to laugh couple of times because you sounded so disappointed while takin it apart.. to be fair i agreed to the disappointment lol but damn Thrustmaster tops again with their Overbuild stuff.. you need a masters degree to take that thing apart lol

looks much better then before.

Does it work on Xbox aswell? Does it require any settings?

I wonder if anyone at Simagic saw this video since they recently release a hydraulic damper for the p1000 throttle.

Hello Peter can you send me a link for all the part the install this on my Thrust master TS-RCRacer.

But if you use elastomers with angle it still kinda measures your force. Example 1: If you apply 30kg of pressure on brake to have, let's say 75% braking power in game, and with that 30kg you move the pedal, let's say 5cm, you will always have to apply 30kg or 5cm to get 75% braking power! Example 2: If you apply 35kg of pressure on brake to have, let's say 82% braking power in game, and with that 35kg you move the pedal, let's say 5,4cm, you will always have to apply 35kg or 5,4cm to get 82% braking power! And this is the reason I love P1000, because you can have elastomers but measure distance! So even simpler solution is to have elastomers and travel sensor for best precision, as you showed in the beginning of the video. You can be 1-2% perfect that way. Only thing is, that you have to have at least some kind of travel to make this viable... those dudes that do 0,0cm brake pedal travel setups, sorry, you guys are crazy anyway! :) And for guys that don't wanna mod and that still wanna use brake force and not travel, you can tinker with braking curve at the 80% point to make it not drop that much. It's not perfect solution, but it's some kind of first aid measure.

4 years late. Great work anyway

Hey Peter, just checking in as it’s been a few months - do you still use this setup or have you made any additional changes? Thanks!

Hy do you know how i can replace/repair my wheel. I have already looked online but i cant find a solution. So my problem is: my on/ off switch is broken . It doesnt snap into place ( switch on place/position) . It automatically snaps back to (off place/position) 😮 thanks

Hey simagic as i suspected just released their damper, i was hoping you would get it and review for comparison with the fanatec one and differences stock vs with damper

Hi your project look really cool! Can you share schematics of this PCB?

what about a simucube hub? no PS2 connector or is the PS2 thrustmaster portion sticking out the back optional?

Well done video.

is this still working great?

I'd be grateful if you mind to make the quick release for this wheel that compatible with Moza wheel base 😁

Oh man!!!! Just simply awesome. Problem for me though is I have to wait til December '24! Why? Thats when guarantee runs out 🤦🏻

Just completed the mod printed everything in PLA and it’s awesome, thank you for creating this!

It works with every thrustmaster wheel or just with tmx???

ordered files and damper, hopefully it will fix cheap springy feeling on throttle, for now i have p[rtiallysolved by adding 2 rubber pads to the spring

So you're telling me, that for less than 100 bucks I can upgrade my TS-XW to full Quickrelease? How the heck did I need 4 years to finally come across this video?!😂😭

This guy 😂 What is he expecting for £200, an FIA grade wheel. It’s made for some guy in his bedroom to play a game. Best comment is when he looks at the rear cavity and says “that’s the old design, they must have started with that and then changed their mind”. Because that’s how products that are going to have $100k’s spent on taking them to production and market are designed 😂 He has very sensitive hands too. The grips hurt them just by picking the wheel up 🤦‍♂️

magnificent!!. can you make damper mod for Heusinveld Sprint ?

lol meanwhile you can invert the p2000 easier then the p1000

which is the stiffest die spring? Im hoping to have a gt or foruma style stiffness in my pedal. Thank you!

Hello everyone. Santa gave me one of these and i am upgrade with the peters true quickrelease mod. Aparently it should work BUT not perfect. The first thing you need 3 m4x50 or 52 screws (i must buy 52 to test, because i thing 50 maybe is not enought), the previous m4x45 are not enought. Other thing is the main 3d printed piece. The curve not fit because touch with the magnetic pads. I must sand a little the sides. I will test and told soon

I would buy this but it to complicated for my brain 🧠 and getting the actual quick release off the net 🙃 ill mess it up for sure.

@2:46 Any way we can buy those washers/sleeves? For those with no access to 3D printing. TY

I have Ferrari 488 Challenge Edition and open wheel add-on. Which mods should I order? I can not understand

You recommend the extended throttle pedal for better heel toe?

Does it squeak with the T818?

Is it possible fpr the quick release screws that you heated to become lose on their own? My wheel has weird play in the qr. Maybe i need to take it apart and see..

If anyone does upgrades for this wheel I'll buy everything, I wouldn't be surprised if someone ends up making a 3 mm carbon fiber face and better grips for this, looks like it would be a good improvement on it. One thing that I hate on the TM wheels is that the whole attachment to the base is made trough that cheap plastic, and then they put a thin metal face on top of that, so the whole thing feels like shit in your hands.