Are u sure u and matt aren't brothers(step bros) separated at birth ? 🤔 😂 its good to have great friends u can rely on, i bet u two are atleast in each others videos 1/4 to 1/3 of the time, helping each other out, sometimes helping someone else out !!
CW McCall “When I tell you to put a rock under the wheel I mean ROCK! now look at that what you got there, no bigger than a grapefruit” 😂😂😂 they lost the whole You drive em Army jeep car right over the cliff.
Way to go Sam! Love the old school blade attachment. Next time find a gin pole on the front of an old truck or use a tree limb! History man! Cute kid too! Nothing in the world like being a Dad!
Shake hands with danger..... believe it or not I was just watching that video last week and showing it to my son. They showed our class that video in the early 80s at the start of our Vo-Tech class.Ive riuned some boots by using my foot for a hammer like that.
I would bet those PA girls know all about Sammy and his quick hands. You guys have a beautiful park full of great "man toys" to play with. I worked CAT 33 yrs in Decatur, IL and drove all of the products produced at that facility. I even drove the first 777 of the line in 1978/9. I also used to run around in the strip mines over in Indiana. During my early days at CAT I went over to a mine at Dugger, Indiana. A friend of my Dad was an operator on a 150 yd Marion walking drag line and he my Dad they had a double D-9 on trial. I tracked it down and was taking pictures. The operator was spreading topsoil. He stopped to see what I was doing. (That was "private property). He invited my up for a ride. After about an hour and a hundred questions from me, He decided I should try the controls.. WOW. It had a 20' blade in front of those two D-9's. There were 64 wires running from the right tractor to the left tractor to control all the solenoids that made it work. It was a blast. Later Big Daddy Sam
You got a lot better at editing at the end. Earlier you make/break your videos every 2 - 5 seconds and it was painful to watch. I had to stop watching some of your earlier videos because of the same problem. The content is good but the make/break is really tiring and made me nauseous - and I am not epileptic. You have good mates and I also know you have helped your mates regularly. Well done to all of you. Retired mechanic/machinist in Land Down Under.
Awight, Matt says he's 6-2, trying to guestimate in that frame where he's standin' in front... the top of the damn tracks are almost to his shoulders!!! Thang's a Monster!
Two of Matt on any Crew would Make an Operator Foreman Very Happy, He is Good Help with a Great Sense of Humor & an Asset to the Industry. As an Operator/Foreman for a Utility Crew, I Know Quite Well how having the Right Help can Make You or Drive You to Drink Heavily on the Weekends! Appreciate your Having Us Along, I’ll catch You on the next One, Keep It Safe Out There Fella’s
How ironic and representative of a true past. In evolution the previous dominant species reinforces the need for the growth and improvement while undermining their own. Here we see a cable machine assembling the tools that will see it made antiquated and even likely slated for destruction, Imagine how many steam machines assembled their successors or the amount of machine tools driven by a steam power and band drive that participated in the processes creating their dedication to the scrap heap. The slide rules that began the math to design the plc. You n Matt should immortalize such with still imagery dressed in decade appropriate attire like the train conductor who once shouted his command to the engineer and seen no more save for the few bastions of museums and short rails that run dotted across the country,
Despite the hard work and muddy conditions, it looked like you guys were having fun. After the battery hook-up, remind me NOT to ask you to do anything electrical for me! 🤣 Would like to know how long it actually took you to put the blade and everything together. Cheers, Peter
Well that was very entertaining I’m glad put the link up and I’m a subscriber now so I’m looking forward to your channel. BTW I absolutely love your Mack I’ve never driven that model but I would in a heartbeat. I agree the the other post the two of you working together is really fun to watch.
besides you taking a bit of a bath, with the oil, was a great video. strange how the ending of your video, and then ending of Matt's video both messed up towards the end. HUMMM>>> Great video, wait on the next one, and Love when you and Matt work together.
What's the story on the Bucyrus hydraulic excavator on the hill? It looks like it was moved ahead a bit but never took a bite. Really enjoy your content.
That machine has been at the show for a few years and is a neat piece of history. Check out this old video of it running! th-cam.com/video/Egl2rPyZrsI/w-d-xo.htmlsi=lJAZxDZBeJ2H2MOe
Enjoy watching all this stuff I spent some time in the Army running rough terrain fork lifts and really enjoyed it except that it was in Vietnam. I don't know who your third hand is, but he is really ready to jump in and help finish things. Please give him some cred he deserves it. I'm hooked on Matts channel and now this one too. Stay safe and keep posting! A lot of us old guys that can't do this stuff very well anymore really enjoy watching!
I like your and Matt’s channels, but it always seems to make them better when you both are working together on them😊
man, that was a fin day but the video doesnt show how stinken humid it was 😮💨
I love that all youtube HD mechanics are familiar with Shake Hands with Danger.
"Do we fall off it or get squished by it?"
"Yes."
Are u sure u and matt aren't brothers(step bros) separated at birth ? 🤔 😂 its good to have great friends u can rely on, i bet u two are atleast in each others videos 1/4 to 1/3 of the time, helping each other out, sometimes helping someone else out !!
Instructions, how to Assemble this wonderful machine was defiantly before OSHA no doubt.
CW McCall “When I tell you to put a rock under the wheel I mean ROCK! now look at that what you got there, no bigger than a grapefruit” 😂😂😂 they lost the whole You drive em Army jeep car right over the cliff.
I always enjoy watching your videos Sam. You and Matt make an excellent team.
The boys are back in town. Good one.
Nice machine
Way to go Sam! Love the old school blade attachment. Next time find a gin pole on the front of an old truck or use a tree limb! History man! Cute kid too! Nothing in the world like being a Dad!
Sam and Matt just lovin life. 🔧👍🇬🇧
Nobody realizes that the most fun you can have up at the showgrounds is when the show is not happening lol
Yup. I agree with Steve. ANY video featuring Sam AND Matt is GUARANTEED to be FUN !!
What a great video. I loved every minute of it. You really know how to play hard and have fun.
You two are the best at entertainment, and knowledgeable about your machines, keep doing what you're doing .❤❤
YALL MAKE AN OLD EQUIPMENT MAN HAPPY ,,, THANKS SAM ,, MATT,, AND SON,,,
Love the video and how you two work so well together it’s great to have friends you can really on mate.
Talk about the sword of Damocles!!!
Came over from Matt's channel. Fun video. Will be back!
You guys put on a great show. Liked it much, thanks!
Loved the CW McCall reference!
Shake hands with danger..... believe it or not I was just watching that video last week and showing it to my son. They showed our class that video in the early 80s at the start of our Vo-Tech class.Ive riuned some boots by using my foot for a hammer like that.
Gotta ask, could that be the Semi Suoervillians in the background? 😎
I don’t think there’s anything wrong with the turbo. Those 817’s are natural born smokers. I ran a TD25 for years and she smoked just like that
That weird feeling when ya like.your step dad more yhan your real dad 😂👀👀
Hey is that dozer caterpillar that they sold international, is that why it has the international on it? Great videos
Look Mr. Diesel Creek taking a break from making videos.
“Do I need to worry about arc flash? Yep.” 😂😂
Need to install some arc flash stickers on the back 😂
The ground ginger in the toolbox is an old timers substitute for easy start. Go easy, though, you don't want to make it sneeze/
Very interesting I’ve never heard that!
Does Ginger Brandy work
Probably, Denis, as long as it's directed to the correct orifice.@@dennisholst4322
What a cool vid! The entire time I watched this video Matt’s OSHA Violations song kept going through my head. Awesome job putting that blade together.
That's an awesome dozer, good trade in my opinion, I'm also glad I'm not the only guy that uses "portable batteries" for everything 🤣
That was fun cool comrade thanks for for the video 📼👍 👍
I saw the TD25 at Brownsville last weekend and was wondering who's it was, now I know. Graet job on demostrating how to use a shovel as a crane.
Looked like Matt was surfing @ 0:15 😆 It's good to have friends that you can rely on 👍 Have a great weekend Sam!
I'm 63 and still see a happy smiling bucket when I see these old machines....like big steel dinosaur.
I would bet those PA girls know all about Sammy and his quick hands. You guys have a beautiful park full of great "man toys" to play with. I worked CAT 33 yrs in Decatur, IL and drove all of the products produced at that facility. I even drove the first 777 of the line in 1978/9. I also used to run around in the strip mines over in Indiana. During my early days at CAT I went over to
a mine at Dugger, Indiana. A friend of my Dad was an operator on a 150 yd Marion walking drag line and he my Dad they had a double D-9 on trial. I tracked it down and was taking pictures.
The operator was spreading topsoil. He stopped to see what I was doing. (That was "private property). He invited my up for a ride. After about an hour and a hundred questions from me, He
decided I should try the controls.. WOW. It had a 20' blade in front of those two D-9's. There were 64 wires running from the right tractor to the left tractor to control all the solenoids that made it work. It was a blast.
Later Big Daddy Sam
Great job and nice having all the help!!
You got a lot better at editing at the end. Earlier you make/break your videos every 2 - 5 seconds and it was painful to watch. I had to stop watching some of your earlier videos because of the same problem. The content is good but the make/break is really tiring and made me nauseous - and I am not epileptic. You have good mates and I also know you have helped your mates regularly. Well done to all of you. Retired mechanic/machinist in Land Down Under.
Spoiler alert!
Nobody died.
Awight, Matt says he's 6-2, trying to guestimate in that frame where he's standin' in front... the top of the damn tracks are almost to his shoulders!!! Thang's a Monster!
Crap link from Matt's channel. Found you, eventually. 👍
That old 25 in tidy condition . .turbo. injectors .pump. tidy up .cheers
Two of Matt on any Crew would Make an Operator Foreman Very Happy, He is Good Help with a Great Sense of Humor & an Asset to the Industry. As an Operator/Foreman for a Utility Crew, I Know Quite Well how having the Right Help can Make You or Drive You to Drink Heavily on the Weekends! Appreciate your Having Us Along, I’ll catch You on the next One, Keep It Safe Out There Fella’s
How ironic and representative of a true past. In evolution the previous dominant species reinforces the need for the growth and improvement while undermining their own. Here we see a cable machine assembling the tools that will see it made antiquated and even likely slated for destruction, Imagine how many steam machines assembled their successors or the amount of machine tools driven by a steam power and band drive that participated in the processes creating their dedication to the scrap heap. The slide rules that began the math to design the plc. You n Matt should immortalize such with still imagery dressed in decade appropriate attire like the train conductor who once shouted his command to the engineer and seen no more save for the few bastions of museums and short rails that run dotted across the country,
Great team , very interesting stuff , thanks for sharing !
Looks like you all had fun! Also great to see the trust between you moving heavy and dangerous parts around! :)
Who knew Matt was a surfer dude 😅👍🏻🏴
You guys are rewriting the OSHA book of don’t do!!! That is one monster big dozer!! Great video!! Thanks for sharing
Despite the hard work and muddy conditions, it looked like you guys were having fun. After the battery hook-up, remind me NOT to ask you to do anything electrical for me! 🤣 Would like to know how long it actually took you to put the blade and everything together.
Cheers, Peter
Well that was very entertaining I’m glad put the link up and I’m a subscriber now so I’m looking forward to your channel.
BTW I absolutely love your Mack I’ve never driven that model but I would in a heartbeat.
I agree the the other post the two of you working together is really fun to watch.
My dad had a TD20c he bought new to go mining in 1972, it looks like its big brother, TD15c is almost identical to the 20 too
besides you taking a bit of a bath, with the oil, was a great video. strange how the ending of your video, and then ending of Matt's video both messed up towards the end. HUMMM>>> Great video, wait on the next one, and Love when you and Matt work together.
Time to seek out Area Diesel Service for your turbo and injectors.
Don’t you worry the turbo is currently there lol
The shovel operator would have made my grandfather from West Virginia proud. I am a coal miner's grandson. No I do not sing.
What's the story on the Bucyrus hydraulic excavator on the hill? It looks like it was moved ahead a bit but never took a bite. Really enjoy your content.
That machine has been at the show for a few years and is a neat piece of history. Check out this old video of it running! th-cam.com/video/Egl2rPyZrsI/w-d-xo.htmlsi=lJAZxDZBeJ2H2MOe
Enjoy the video on the TD25C .
Were you at the Steam Show? How come you put the blade on there; did you not have the right equipment/number of hands at home?
That's nice chunk of iron. Also nicely done. Ya' gained a sub.
Tell Matt he needs to bend his knees when he surfs. Bad Form. Great dozer!!!
International made some good looking equipment, they are missed.
Safety third
Great video guys so cheers for letting us tag along bro. Safe travels. Ken.
what year is that TD25? I came from Matts channel so I had to sub!!
Great teamwork and shake hands with danger video, cheers from down under
Love it. So much better to watch than Matt warshing nother shriner's lawn tractor lmao
I am surprised that you didn't sing a duet while installing that blade
You guys have all these tractors and not one of you have a working Backhoe lol
Great video guys. Love to see all the old machines work. So awesome.
Diesel creek sent me here! Great videos both of y’all!
I definitely support blade installs with shovels at either of the Brownsville’s . Let’s see what you can trade up for next
Enjoy watching all this stuff I spent some time in the Army running rough terrain fork lifts and really enjoyed it except that it was in Vietnam. I don't know who your third hand is, but he is really ready to jump in and help finish things. Please give him some cred he deserves it. I'm hooked on Matts channel and now this one too. Stay safe and keep posting! A lot of us old guys that can't do this stuff very well anymore really enjoy watching!
Big John says thanks for noticing!
Awesome as always.Thanks for sharing and taking us along
Cuppa good ole boys. Hope y’all are doing well
I liked Matts lasso attempt... Very camp!
The dynamic duo strike again 😄😄
So I am guessing her name is Ginger, awesome video ..
The ground ginger can be used to stop a coolant leak
That is a beast. Beautifully filmed. 👏👏🇦🇺😁
❤ That’s awesome very good contact Contant
Thanks! Glad you enjoyed watching
I thought we might get to hear Matt sing the OSHA song.
How does that 25 blade compare to a D9g
MM77 Approved 👍🏼👍🏼
Really enjoy watching your show
Great video. Good to see Matt make an appearance.
Scrappy and mat. Great work together and a great team.
I hereby christen her "GINGER".
.....
Team make in scrapyard heaven. 😉
You are quite the operator on that shovel!
Never heard of cooking on top of an engine
Great video Sam ,pretty slick the way you guys installed the blade!
Hey Sam, I recently saw some guy's video on turbos and if memory serves me correct, he had his repaired at Area Diesel. Might check them out.
Planning on having them rebuild it!
@@ScrappyIndustries 😁
The Terrible Two - nice to see you both working together , not forgetting BIG JOHN 👍👍👍
Using a Shovel and a shover! 😅
I don't know what you plan to use that tractor for,but I'm sure you will find it most capable of anything.
I loved running that old iron,no computer,no emissions etc,skill from human input is how this stuff works
Hey look Matt can surf!
I'm so jealous of your life style
That's a beautiful machine
That Lorain sure is nice.