How to Program a Chrysler Replacement Key Fob! (Town & Country 2008 - 2016, 300 '08-10)

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 พ.ย. 2024

ความคิดเห็น • 12

  • @vanamee692
    @vanamee692 10 หลายเดือนก่อน +3

    According to my 2008 Town and Country user manual, page 17, if you have TWO valid RKE keys, you can program additional keys, and this Simple Key device would not be needed. But if you only have ONE valid RKE key, I suppose this Simple Key device would be needed.

    • @shadowmanmc1130
      @shadowmanmc1130 7 หลายเดือนก่อน

      Yes, there’s actually a video on it. Also on TH-cam you take the two original keys put one in turn it on for 10 seconds turn it off take the second key put it in. Turn it on at 10 seconds you’ll see a little chime in a light on your dash turn the second key off pull it out and now put in your program key turn it on wait 10 seconds, turn it off then turn it on a second time the same and it should be programmed

  • @jewell1243
    @jewell1243 11 หลายเดือนก่อน +5

    If I had a key kit I would not need your advice show how to program without kit.

  • @veesaa6863
    @veesaa6863 หลายเดือนก่อน

    Thank you for the video. Will these instructions also work for Chrysler Grand Voyager 2013?

  • @nicolewaldrop8045
    @nicolewaldrop8045 6 หลายเดือนก่อน +4

    If i need a new key, that means the original one doesn’t work anymore. So what the hell do you mean take the original key and start after setting the dial to 3??? 🤨🤨🤨

    • @dustincmills
      @dustincmills 2 หลายเดือนก่อน +2

      Buy a new car

    • @Shawn-j8h
      @Shawn-j8h 18 วันที่ผ่านมา

      Most people don’t let their vehicles run until they have no keys. SMH. Who raised you? Hahahahaha. They have failed you.

  • @tracyherman7967
    @tracyherman7967 6 หลายเดือนก่อน

    Ngl, I’m hypnotized by those hands!

  • @ranat5526
    @ranat5526 8 หลายเดือนก่อน

    Just ordered one from Amazon for UK registered vehicle.

  • @Williamsongs
    @Williamsongs 9 หลายเดือนก่อน

    I watched this video. I bought the Simplw Key. But I have the full size faceplate and this doesn't show me how to install as I don't have the blue light that the smaller faceplate does, so how do I know the code is working?

    • @dannybockius2255
      @dannybockius2255 6 หลายเดือนก่อน +1

      Program it with the small faceplate then switch it after, its the circuit board that gets programmed

  • @tonydroz9146
    @tonydroz9146 ปีที่แล้ว

    Ty it worked .