iPad Air 2 Charging Port with Ripped Pads. Can I Fix This Motherboard?
ฝัง
- เผยแพร่เมื่อ 3 เม.ย. 2022
- If you need your iPad Repaired, send me a message for a quote: www.vccboardrepairs.com/conta...
Here are some of the tools used in today’s video:
🛒 Polarizer Microscope Light: s.click.aliexpress.com/e/_AD76gP
🛒 UV Mask www.injuredgadgets.com/mechan...
🛒 Premade Jumpers - Solder Lugs (China): bit.ly/3evkrBS
🛒 Premade Jumpers - Solder Lugs (USA): www.injuredgadgets.com/wylie-...
🛒Use Promo Code “VCCBR” for 5% off your first order at WGP.com
About This Video:
Someone attempting to fix this iPad Air 2 charging port & totally destroyed the pads on the board. This is common for someone inexperienced with microsoldering. I found about 13 ripped pads. But, if you understand how these circuits work, you'll quickly figure out how to only jump the pads that are critical. Watch to find out if I can fully fix this iPad.
Useful Links
►Check out my new T-Shirts, Hoodies & more: merch.vccboardrepairs.com
►Amazon Storefront: www.amazon.com/shop/vccboardr...
►Join the new Facebook Group for Repair Techs vccboardrepairs.com/vcc-fb-group
►Let me teach you to Microsolder: vccboardrepairs.com/profixerr...
►Full list of Solder Tools: www.vccboardrepairs.com/gear
►Mail us your iPhone/iPad for repair: www.vccboardrepairs.com/conta...
VCC Board Repair Tools:
🛒Buy The Seek Stand by VCC Board Repairs here: vccboardrepairs.com/buy-seek-...
📸Buy The Seek Compact Pro here: amzn.to/34I4whX
🕶 Buy Macro Lens here: www.vccboardrepairs.com/buy-m...
My Tshirt:
🚀Today's shirt can be purchased here: merch.vccboardrepairs.com/lis...
What repair or tool review would you like me to do next? Let me know in the comments below!
Common Soldering Tools I use:
✫ Parco Microscope Complete Kit: amzn.to/3qXrGb0
✫ Hot Air Station Quick 861DW: www.injuredgadgets.com/quick-...
✫ Soldering Iron Station Hakko FM203: www.injuredgadgets.com/fm-203...
✫ Hakko BC1 Bevel Tip: www.injuredgadgets.com/hakko-...
✫ AOR Curved Reverse Tweezers: www.injuredgadgets.com/cerami...
✫Super Low Melt Solder Wire (138C): www.injuredgadgets.com/mechan...
✫ Kester 63/37 0.8mm Solder Wire (183C): amzn.to/365b7AA
✫ Genuine Amtech 559 Flux: www.injuredgadgets.com/catalo...
✫ Cleaning Wipe Towels:
www.injuredgadgets.com/catalo...
✫ Desoldering Wick Braid: amzn.to/3FU8ilf
✫ 99% Isopropyl Alcohol: amzn.to/3oOf1Yn
✫ Needle Drip Bottle: www.injuredgadgets.com/flux-b...
Follow me:
► Facebook: / vccboardrepairs
► Instagram: / vcc_board_repairs
Looking to Outsource?
💼 B2B & Wholesale pricing for mail in repairs is available for repair shops in the USA. Contact us for more information: www.vccboardrepairs.com/conta...
Please note:
⚠ This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!
Just did an iPad 5 that had had the charge port replaced on it last year. When I was isolating the battery and lifting up on the motherboard, the whole board came up and the charge port stayed stuck to the frame. Turns out I was looking at 18 torn pads, 15 of which needed to be jumpered. 2 attempts and continuity checks on all pads/test points and we're back in business. I'm trying to keep an open mind on "Prior repair", been there, done that so I have to look at it as a revenue stream. Learning everyday ;)
Oh wow, that's a lot of pads to repair 😅
@@VCCBoardRepairs Yes, the first attempt I left out all that were on the same line that had a connection to the board but already but something wasn't right and it failed the dock flex test. So, "out of an abundance of caution" (LOL) I started all over and did them all except for GND and NC's.
I am sooo so glad you made this video. I literally just destroyed the logic board in my ipad's charging port by ripping the charge port off. It literally took off every pad and I have been searching for the fix. You saved me! I was trying to save a couple hundred dollars but nearly had to buy a new ipad. Phew! that was a close one.
Glad to hear this video helped!
Thanks for the video Jesse. Sometimes with the UV coating I will use an extremely small gauge of needle and apply it to the board.
That works too!
I use a watch oiler. It is very fine tip and works great.
Personally I like a curved headed eyeliner brush. Super fine, curved works great.
Do you offer online courses ??
I just love how you explain stuff in details..
Yes I do! You can learn more about it here: vccboardrepairs.com/profixerr-course
Jesse, not trying to give you a hard time, but just wanted to say that "redundant pads/traces" in the charging flex are for splitting up the charging current coming from the charger. By not replacing all/most of the pads you are risking all the current traveling through a path that is insufficient for that much current. I understand why you wouldn't want to replace 5 pads if 2 or 3 are connected, but I think it can be risky and could result in later warranty work.
Solid point!
FWIW, I do offer a lifetime warranty & never had a warranty device come in because of this.
Impressive job. I just join your subscription and you did amazing job. I’m impressive by your good work… I’m Richard from Alaska. Nice meet ya. Now I start watch all your video from now on. :)
I appreciate that. Thank you
Yeah :)
Amazing
Thank you! Cheers!
What is the name of the software you use for the Schematics?
Hello Jesse!
Can I make you a question about an iPad?
I have an iPad 5 with that same problem.
I replaced the charging port but after that the iPad show me red screen.
Then I try took out the NAND to replace it, but I did fcked up and ripped some pads that have no other connection on the board (are bellow cpu) 😂
After that, I try to get another iPad 5 board as a donor, so I try to pull the information of the NAND and put it in the donor board.
But the iPad doesn't activate.
This is not possible, right?
The CPU and NAND information are somehow connected, right?
There is a way to bring that specific iPad serial number to life?
Is it possible to repair if all the black coating is gone and the copper PCB is exposed?
Polazired light was very good.
I really like it!
I don't see an affiliate link for the tristars. Where do you get yours? I need a 1614A1. Or I can buy from you. Thank You sir!
Check mobilesentrix.com
How hot do you have your iron? Having a huge issue with the jumper pads just sticking to my iron tip. TIA
it's always set to 380C for everything. A lot of is also technique
Have you looked into IPC certifications?
Nope. What for?
What software was that for the schematics?
ZXW. It's a board view software, not schematics
Where do you get the repair pad tin
search for Solder Lug
Luxury 👍 Hi from Moscow 🙌
Privet!
How much does something like this cost?
If you're in the USA, send me a message for a quote: www.vccboardrepairs.com/contact-us
@@VCCBoardRepairs I actually sent you an email about 20 minutes ago
I replied already. Thank you
Hello good evening is dark here
I want to learn more about iPad from you pls can you teach me
Pls reply if you see this
Morning!
Is it morning over there
Am I.B