I had same symptoms, DTC P0471, turned out to be a defective exhaust pressure sensor (not the exhaust differential pressure sensor!), and after replacing it and! after cleaning the sooth cloaked thin steel pipe from pressure sensor to exhaust pipe using a wire and drill and after clearing all DTCs it now shows no more lights of errors in the display... Hope this may help...
Hola amigo! Tengo exactamente esas Luces de advertencias. Me arroja el código C1105-00 , lo cual indica problema del ABS en la rueda trasera derecha( ya cambie el sensor de velocidad y he revisado todo en esa rueda y no encuentro el problema).. que podría estar ocurriendo? Saludos
Hola amigo! Yo intercambié el ABS sensor traseros de un lado para otro y me sigue indicando problemas en el ABS del mismo lado! Que podría estar pasando? Saludos
Esa fallo es por una mala masa, tienes que desmontar el paso de rueda del lado del conductor y verás dos cables de negativo uno a la caja de cambios y otro al chasis comprueba que no tenga oxido o suciedad. Saludos
Mi qashqai hoy, conduciendo se me apago el motor y me lanzo error de baja presion de aceite, el nivel del aceite es correcto. Ya no volvio arancar salia el fallo y no dejaba arrancar, el del taller me dice que tiene un fallo de colision cuando no he tenido ninguna colision. Tu ve un besito por atras que apenas tuvo un arañazo muy leve que ni le di importancia, hace cosa de 1 mes y hecho desde entondes mas de 1800km. No entiendo nada.... Ayuda!
It sounds like you're experiencing a complex issue with your Nissan Qashqai. Here are some possible causes and steps you can take to address the problem: ### Possible Causes 1. **Oil Pressure Sensor Fault:** - The oil pressure sensor might be malfunctioning, giving a false low oil pressure reading which can cause the engine to shut down as a protective measure. 2. **Engine Control Unit (ECU) Issue:** - A problem with the ECU could be triggering erroneous faults, such as a collision fault, even though no recent collision occurred. 3. **Electrical or Wiring Issue:** - There could be a problem with the wiring or connectors related to the oil pressure sensor or other critical engine components. 4. **Faulty Collision Sensor:** - The collision sensor might be defective, falsely reporting a collision, and preventing the car from starting as a safety measure. 5. **Other Mechanical Issues:** - While less likely given your description, there could be underlying mechanical issues not immediately apparent. ### Steps to Take 1. **Check Diagnostic Codes:** - Ensure the workshop reads the specific diagnostic trouble codes (DTCs) using an OBD-II scanner. This can give a more precise indication of the problem. 2. **Inspect Wiring and Sensors:** - Have the workshop inspect the wiring and connections to the oil pressure sensor and collision sensors for any signs of damage or disconnection. 3. **Reset the ECU:** - Sometimes, resetting the ECU can clear erroneous fault codes. This can be done by disconnecting the battery for a few minutes or using an OBD-II tool. 4. **Check for Software Updates:** - Ensure that your vehicle’s software is up to date. Sometimes, a software update can fix bugs or issues that cause erroneous fault codes. 5. **Consider a Second Opinion:** - If the workshop you're using cannot identify or fix the issue, consider taking your vehicle to another Nissan-certified mechanic or dealership for a second opinion. 6. **Document Everything:** - Keep detailed records of all the symptoms, diagnostics, and repairs attempted. This can help if the problem persists and you need to escalate the issue with Nissan customer service. ### Immediate Next Steps 1. **Battery Disconnect:** - Try disconnecting the battery for 10-15 minutes to reset the ECU and see if that clears the fault. 2. **Collision Fault Reset:** - Ask the workshop if they can manually reset the collision fault using their diagnostic tools. 3. **Oil Pressure Verification:** - Ensure that the actual oil pressure is checked with a mechanical gauge to rule out a true low oil pressure condition. By following these steps, you can systematically address and potentially resolve the issue. If all else fails, escalating to Nissan customer support with all your documentation might provide a more definitive solution.
Actualización, hoy me dice el mecánico que con el equipo de diagnosis solo a podido entrar en la centralita de carrocería, en las demás centralitas no le deja entrar. Dice que es un marrón muy gordo y que puede tardar un mes en arreglarse, luego me dijo que quizás lo deriven a la Nissan oficial. Que opina sobre que solo pueda entrar a la centralita de carrocería?
Being able to only access the body control unit and not the other control units suggests a few potential issues: 1. **Diagnostic Equipment Limitations**: The diagnostic tool your mechanic is using may not be fully compatible with your vehicle's systems, particularly if it's an advanced or newer model. Official Nissan diagnostic equipment might be necessary to access all control units. 2. **Communication Issues**: There could be a problem with the vehicle's communication network (e.g., CAN bus), preventing the diagnostic tool from communicating with other control units. This could be due to wiring issues, faulty control units, or software glitches. 3. **Control Unit Faults**: One or more control units might be malfunctioning or have software issues that prevent them from being accessed. This could be due to electrical faults, damaged modules, or other hardware problems. 4. **Access Permissions**: Some control units may have security features that require specific authorization or coding to access. Official dealerships often have the necessary permissions and software to bypass these restrictions. Given these possibilities, it makes sense that your mechanic may need more time or may refer the vehicle to an official Nissan service center. Official centers have specialized diagnostic tools and access to the latest software updates, technical bulletins, and proprietary systems that independent mechanics might not have. If your vehicle is still under warranty, or if the issue is complex, involving the official service center might be the best course of action to ensure proper diagnosis and repair.
The Nissan Qashqai typically features an automatic or on-demand four-wheel-drive system. However, specific instructions can vary based on the model year and trim level. Generally, the four-wheel-drive system in many modern vehicles, including the Qashqai, is automatic and engages as needed, depending on factors like traction and wheel slip. For accurate instructions, it's best to refer to your vehicle's owner's manual. If you're having trouble, consider consulting with a Nissan dealership or an automotive professional for assistance tailored to your specific model and year.
Hi, unfortunately I don’t think the launch creader has a capabilities of reading this kind of fault. A more comprehensive diagnostic machine should be able to go into it further
I don't want to take it to Nissan as they want £250 for diagnosis and a 3 week wait, what scanner would read the stop start and AEB faults? I was looking at the topdon artidiag800bt
Mi nueva xtrail 2024, a los 5 días de entregada empezó con el mismo problema. Entró a reparación y el problema siguió. Ahora lleva 2 semanas en reparación y aún no dan con el defecto.
@@shadowcycles5295 Not so easy. In my case, Nissan disassembled the entire dashboard to check every connector and pin. Then they changed the connectors. After that, the issue disappeared. After a few days, they changed the front radar. Now the car is fine. They told me that it is a recurrent issue. We will see if we have more problems.
This can be caused by various issues. In this case it was an ABS fault. A good technician should be able to pin point what the fault is. Thanks for watching
It's main fault is suppose to be a reliable Japanese car and since renault has become its partner and supplied engines its had nothing but rubbish quality components
Bonjour j’ai le même problème 😢 le fusible a50 est grillé la voiture ne démarre plus j’ai changé carrément le boîtier relais qui se trouve derrière la batterie et après un mois le problème est revenu et le fusible a50 sauté Vous pouvez m’aider svp
I’m tired of this Nissan 2023 plate… the power reduces in the middle of the road and many lights in the dashboard with faulty system of engine … I do get horned by other drivers and it’s really embarrassing when people are looking at me as if I was the problematic. My partner took it back to the shop and they said that it’s dust when the outside camera it’s covered by the dust and the sensor becomes affected , that we have to wipe the camera often to stop all those faulty light coming up in the dashboard and car will move normally. We’ve done it but the issue persist 😳🧐
Faulty Advanced Driver Assistance Systems (ADAS) on Nissan Qashqai vehicles have been reported to cause sudden braking incidents. This occurs when the ADAS misinterprets the surrounding environment and triggers the automatic braking system unnecessarily. These incidents can be alarming and potentially dangerous, as sudden braking without valid cause can lead to accidents or near-misses. Nissan has acknowledged these issues and has worked to address them through software updates or recalls to improve the performance and reliability of their ADAS systems. However, drivers should remain vigilant and report any unusual behavior to their dealerships or authorities for further investigation and resolution.
I had same symptoms, DTC P0471, turned out to be a defective exhaust pressure sensor (not the exhaust differential pressure sensor!), and after replacing it and! after cleaning the sooth cloaked thin steel pipe from pressure sensor to exhaust pipe using a wire and drill and after clearing all DTCs it now shows no more lights of errors in the display...
Hope this may help...
Did you clean the DPF ?
I have a Nissan Qashqai 2016 and I have the same problem. The car does not run properly. What is the problem?
Have you had a diagnostic check on the car?
Hola amigo! Tengo exactamente esas Luces de advertencias. Me arroja el código C1105-00 , lo cual indica problema del ABS en la rueda trasera derecha( ya cambie el sensor de velocidad y he revisado todo en esa rueda y no encuentro el problema).. que podría estar ocurriendo? Saludos
This could be a wiring issue
Red exclamation light staying on, what do I press to see what the fault is????
Diagnosed fault : Faulty ABS Sensor (Wheel Speed Sensor)
Replaced the part above. All lights have now gone off. Thank you
Hola amigo! Yo intercambié el ABS sensor traseros de un lado para otro y me sigue indicando problemas en el ABS del mismo lado! Que podría estar pasando? Saludos
@@samuelmejias6095 you could have a wiring issue or a ECU issue
tire pressure or TP sensor in this case ...
if tire pressure light was not on is batterry or other solutions suggested in the coments
👍🏼
Esa fallo es por una mala masa, tienes que desmontar el paso de rueda del lado del conductor y verás dos cables de negativo uno a la caja de cambios y otro al chasis comprueba que no tenga oxido o suciedad. Saludos
This warning can be caused by various issues
Mi qashqai hoy, conduciendo se me apago el motor y me lanzo error de baja presion de aceite, el nivel del aceite es correcto. Ya no volvio arancar salia el fallo y no dejaba arrancar, el del taller me dice que tiene un fallo de colision cuando no he tenido ninguna colision. Tu ve un besito por atras que apenas tuvo un arañazo muy leve que ni le di importancia, hace cosa de 1 mes y hecho desde entondes mas de 1800km. No entiendo nada.... Ayuda!
It sounds like you're experiencing a complex issue with your Nissan Qashqai. Here are some possible causes and steps you can take to address the problem:
### Possible Causes
1. **Oil Pressure Sensor Fault:**
- The oil pressure sensor might be malfunctioning, giving a false low oil pressure reading which can cause the engine to shut down as a protective measure.
2. **Engine Control Unit (ECU) Issue:**
- A problem with the ECU could be triggering erroneous faults, such as a collision fault, even though no recent collision occurred.
3. **Electrical or Wiring Issue:**
- There could be a problem with the wiring or connectors related to the oil pressure sensor or other critical engine components.
4. **Faulty Collision Sensor:**
- The collision sensor might be defective, falsely reporting a collision, and preventing the car from starting as a safety measure.
5. **Other Mechanical Issues:**
- While less likely given your description, there could be underlying mechanical issues not immediately apparent.
### Steps to Take
1. **Check Diagnostic Codes:**
- Ensure the workshop reads the specific diagnostic trouble codes (DTCs) using an OBD-II scanner. This can give a more precise indication of the problem.
2. **Inspect Wiring and Sensors:**
- Have the workshop inspect the wiring and connections to the oil pressure sensor and collision sensors for any signs of damage or disconnection.
3. **Reset the ECU:**
- Sometimes, resetting the ECU can clear erroneous fault codes. This can be done by disconnecting the battery for a few minutes or using an OBD-II tool.
4. **Check for Software Updates:**
- Ensure that your vehicle’s software is up to date. Sometimes, a software update can fix bugs or issues that cause erroneous fault codes.
5. **Consider a Second Opinion:**
- If the workshop you're using cannot identify or fix the issue, consider taking your vehicle to another Nissan-certified mechanic or dealership for a second opinion.
6. **Document Everything:**
- Keep detailed records of all the symptoms, diagnostics, and repairs attempted. This can help if the problem persists and you need to escalate the issue with Nissan customer service.
### Immediate Next Steps
1. **Battery Disconnect:**
- Try disconnecting the battery for 10-15 minutes to reset the ECU and see if that clears the fault.
2. **Collision Fault Reset:**
- Ask the workshop if they can manually reset the collision fault using their diagnostic tools.
3. **Oil Pressure Verification:**
- Ensure that the actual oil pressure is checked with a mechanical gauge to rule out a true low oil pressure condition.
By following these steps, you can systematically address and potentially resolve the issue. If all else fails, escalating to Nissan customer support with all your documentation might provide a more definitive solution.
@@lifebehindcars muchas muchas muchas gracias por toda la informacion, y responder tan rapido. un saludo.
@@BreadsbySergy no problem. Let me know what the issue is once you have repaired the fault
Actualización, hoy me dice el mecánico que con el equipo de diagnosis solo a podido entrar en la centralita de carrocería, en las demás centralitas no le deja entrar. Dice que es un marrón muy gordo y que puede tardar un mes en arreglarse, luego me dijo que quizás lo deriven a la Nissan oficial. Que opina sobre que solo pueda entrar a la centralita de carrocería?
Being able to only access the body control unit and not the other control units suggests a few potential issues:
1. **Diagnostic Equipment Limitations**: The diagnostic tool your mechanic is using may not be fully compatible with your vehicle's systems, particularly if it's an advanced or newer model. Official Nissan diagnostic equipment might be necessary to access all control units.
2. **Communication Issues**: There could be a problem with the vehicle's communication network (e.g., CAN bus), preventing the diagnostic tool from communicating with other control units. This could be due to wiring issues, faulty control units, or software glitches.
3. **Control Unit Faults**: One or more control units might be malfunctioning or have software issues that prevent them from being accessed. This could be due to electrical faults, damaged modules, or other hardware problems.
4. **Access Permissions**: Some control units may have security features that require specific authorization or coding to access. Official dealerships often have the necessary permissions and software to bypass these restrictions.
Given these possibilities, it makes sense that your mechanic may need more time or may refer the vehicle to an official Nissan service center. Official centers have specialized diagnostic tools and access to the latest software updates, technical bulletins, and proprietary systems that independent mechanics might not have.
If your vehicle is still under warranty, or if the issue is complex, involving the official service center might be the best course of action to ensure proper diagnosis and repair.
How do u turn on awd?
The Nissan Qashqai typically features an automatic or on-demand four-wheel-drive system. However, specific instructions can vary based on the model year and trim level. Generally, the four-wheel-drive system in many modern vehicles, including the Qashqai, is automatic and engages as needed, depending on factors like traction and wheel slip.
For accurate instructions, it's best to refer to your vehicle's owner's manual. If you're having trouble, consider consulting with a Nissan dealership or an automotive professional for assistance tailored to your specific model and year.
I have the same lights plus stop start system fault. No error codes coming up. I've been told it could be the battery
What diagnostic equipment are you using ?
@@lifebehindcars just a cheap launch Creader 6s, but it says no codes found
Hi, unfortunately I don’t think the launch creader has a capabilities of reading this kind of fault. A more comprehensive diagnostic machine should be able to go into it further
@@lifebehindcars what about a snap-on solus ?
I don't want to take it to Nissan as they want £250 for diagnosis and a 3 week wait, what scanner would read the stop start and AEB faults? I was looking at the topdon artidiag800bt
Mi nueva xtrail 2024, a los 5 días de entregada empezó con el mismo problema. Entró a reparación y el problema siguió. Ahora lleva 2 semanas en reparación y aún no dan con el defecto.
Unbelievable.
Simple abs sensor issue.
Any idea what happens
@@shadowcycles5295 Not so easy. In my case, Nissan disassembled the entire dashboard to check every connector and pin. Then they changed the connectors. After that, the issue disappeared. After a few days, they changed the front radar. Now the car is fine. They told me that it is a recurrent issue. We will see if we have more problems.
I have same problem how do you fix it
Have you had a diagnostic check on your vehicle?
@@lifebehindcars yes the mechanic removed and programmed the car but next day the lights came back on what can it be 1.2 petrol Nissan Qashqai
@@Turbo_BHP what did the technician program on the vehicle?
@@lifebehindcars yes the mechanic said there's no faults so he programmed and removed the lights
@@Turbo_BHP did you receive a diagnostic report ?
Hi i have same promblem,can you help please.
Has a diagnostic check been carried out on the car?
I have error C1A14:04 help!!!!
I have this same problem exactly. What is the main fault please?
This can be caused by various issues. In this case it was an ABS fault. A good technician should be able to pin point what the fault is. Thanks for watching
It's main fault is suppose to be a reliable Japanese car and since renault has become its partner and supplied engines its had nothing but rubbish quality components
Anyone has got problem with the timing chain in their nissan qashqai?
@@brianchueng7099 what problem do you have?
UPDATE:
Diagnosed fault : Faulty ABS Sensor (Wheel Spees Sensor)
Replaced the part above. All lights have now gone off.
Bonjour j’ai le même problème 😢 le fusible a50 est grillé la voiture ne démarre plus j’ai changé carrément le boîtier relais qui se trouve derrière la batterie et après un mois le problème est revenu et le fusible a50 sauté
Vous pouvez m’aider svp
Is the 50amp fuse for the ESP system?
@@lifebehindcars non c’est pas ça
What is the fuse for? Have you had a diagnostic check carried out on the vehicle?
I’m tired of this Nissan 2023 plate… the power reduces in the middle of the road and many lights in the dashboard with faulty system of engine …
I do get horned by other drivers and it’s really embarrassing when people are looking at me as if I was the problematic. My partner took it back to the shop and they said that it’s dust when the outside camera it’s covered by the dust and the sensor becomes affected , that we have to wipe the camera often to stop all those faulty light coming up in the dashboard and car will move normally. We’ve done it but the issue persist 😳🧐
Faulty Advanced Driver Assistance Systems (ADAS) on Nissan Qashqai vehicles have been reported to cause sudden braking incidents. This occurs when the ADAS misinterprets the surrounding environment and triggers the automatic braking system unnecessarily. These incidents can be alarming and potentially dangerous, as sudden braking without valid cause can lead to accidents or near-misses. Nissan has acknowledged these issues and has worked to address them through software updates or recalls to improve the performance and reliability of their ADAS systems. However, drivers should remain vigilant and report any unusual behavior to their dealerships or authorities for further investigation and resolution.
Warning chassing system fault
🧐
Akü
It wasn’t the battery
I have exactly the same fault. I have bought a new tyre pressure sensor. Will update as soon as I have had it replaced
@@mzp5553 Did you have you car diagnosed?
Sorunun çözümünü buldunuz mu acaba