Alex thanks for your 64 impala cut drill weld info on hydraulics I’m gonna wing it & order your two pump kit and get to cutting 😛 ….*note this will be my first time attempting anything like this but watching your utube videos I feel like I got this 🤗👍
@Lowridersdoggs have not touched my 64 … only got around to drive it here n there got way too many projects 🤦🏻♂️ main priority is finish remolding my house then I can put money into the 64
Hello Alex just wondering if that is the same way to cut hole for a 1965 impala also or is there a different way? thanks for posting your videos they are very helpful and it is truly appreciated...
Great vid son. If u guys can't do a complete video, you should do episodes to show a complete build . I'd rather buy a video to compensate for your work, but if you don't wanna, u should go through a series. Thnx Again 4 the vid.
You can but that causes the cylinders to ticontrolled. Towards the engine. and constantly will have a side load on them. No to mention causes the coil/cup to sit funny as well. And welding to cast isn't the best idea either enless its controled.. but hey every one has there own way to do it. Lol
We all want the hole set up video I would appreciate but yup it would be to long for you tube hey Alex I have a question a rack is important to be welded on or bolted on the car wats the difference and also how to build the bridge to power three the proper way that will be a good video too thanx keep up the good job ..
Tip. Use wd40 when using the hole saw. It will be a lot easier/smoother
Cutting oil even better.
Would love to see you guys with your own TV show👍
Alex thanks for your 64 impala cut drill weld info on hydraulics I’m gonna wing it & order your two pump kit and get to cutting 😛 ….*note this will be my first time attempting anything like this but watching your utube videos I feel like I got this 🤗👍
How did it go?
@Lowridersdoggs have not touched my 64 … only got around to drive it here n there got way too many projects 🤦🏻♂️ main priority is finish remolding my house then I can put money into the 64
Please use cutting oil next time! Your hole saw blades will thank you! Good video!
Hello Alex just wondering if that is the same way to cut hole for a 1965 impala also or is there a different way? thanks for posting your videos they are very helpful and it is truly appreciated...
I never cut metal with those hole saws but you can put them on corded drill I cut wood holes a few times.
These guy are great , I've always got good advice from them .
Great vid son. If u guys can't do a complete video, you should do episodes to show a complete build . I'd rather buy a video to compensate for your work, but if you don't wanna, u should go through a series. Thnx Again 4 the vid.
I had to move my pilot over a hair too cylinders n everything lined up perfect! Thanx for the vid
great video Alex. next do one on installing front cyclender and coil. you have a lot of guys who can do the work but no good shops close by.
Bro, I'm loveing these videos!!
I think it's pretty clear lol if you made a dvd everyone! ! Will buy them lol I will that's a definite
Oh yeah!! This takes back to my days ...
I always cut the control arm bracket and reweld it with a loop and put the hole in the middle of the shock tower where it's supposed to go
You can but that causes the cylinders to ticontrolled. Towards the engine. and constantly will have a side load on them. No to mention causes the coil/cup to sit funny as well. And welding to cast isn't the best idea either enless its controled.. but hey every one has there own way to do it. Lol
@@alexhoppos909 I didn't say it was a good idea, but that was 30 years ago and I didn't know any better lol
Could you used a drill press?
Do this size work for the front and back on a g body
Can you make a video on rebuiding a gear /pump head. And wiring 3 pump 10batts. Thanks
So on a regal its dead center on that hole?
Thanx Alex good tip keep up the great work. ..
What about for 67 is it the same?
We all want the hole set up video I would appreciate but yup it would be to long for you tube hey Alex I have a question a rack is important to be welded on or bolted on the car wats the difference and also how to build the bridge to power three the proper way that will be a good video too thanx keep up the good job ..
I need help my car fell on me and won't come up shit just ain't rite
I'm doing a big body fleetwood.should I cut from the center shock hole ? And should the rear be cut center where the upper cool mounts? 1 3/4 too?
Great video Alex.
Hey alex when u get the chance could you make a video on how to install the tower reinforcement plates for 58-64 ?
do u have any pics or videos for the front of a 93 s10
Alex, just purchased power balls and cylinders for my 74 elcamino (upgrade) do u have any videos on how to install them?
so funny to read some of the comments. never substitute time for quality. burn 5 hole saw who cares the out come is far cleaner. some people
What about on a 67? would you have to offset the cylinder as well?
Can you drill it that way for a 76 Monte Carlo?
ever done a 80s box town car / 80s crown vic? looking for tips.
thank you for this! keep it up
Would that hole setup work on a gbody grand prix
What's the cut for a 68 Buick LeSabre?
How about a G body
Hey can you do a video of how to cut a g-body
do you the same on a 1983 chevrolet c10
how do you cut holes for a 93 town car
Where'd you buy the hole saw?
We buy them from matco tools but the milwake ones from home depot are good too
@@alexhoppos909 what's up Alex was going to cut my caddy for cylinders but was trying to get a good drill which drill do you guys use..
nice job bro
aye alex can u show some more how to videos or tutorials for the 58-64 impala
when i get a chance i will
+alexhoppos909 thanks man i appreciate it alot u need to make a video and sale it man cuzz alot of us cats like to learn how to do it..
+dub562 ya definatliey man when i het a chance ill upload more just been busy with production lately
+alexhoppos909 I feel u man thanks for all the help in advance.
+dub562 any time!!
👍🏼
Please do a video about mounting cylinder onto a car please
How about a repair if it is over size or damage
Steve Estrada weld a steel tube with the I.D. A lil bigger than ur cylinder O.D. Keeps the cylinder straight as well
do you guys have any gbody frames for sale?
good vid thanks
do videos on diffrent lowlows bro
nice
Gotta get you some hole saw grease/wax.
alexhoppo can you post a vid of how to cut a cutlas
I don't have any to cut right now but those are dead center of the shock hole in front and dead center of coil spring I'm rear
+alexhoppos909
thanks
Alex how about a 94 fleetwood
dead center this is for impala only