From the thumbnail I was shocked that AJ would use a surface fill... Just a trimmed boundary- should have known. That aside, the part will be CNC machined out of wood and finished sanded, the fidelity of the CAD won't transfer to the final part...
Both the luthiers that I've been talking with are machining their necks and were struggling with this area. Mainly with controlling the fullness or concavity of the blend into the volute edge. Fullness is ok, sand it back. Both had concavity, so best to fix in the model as auto 'surface fill'er looks bad on an oiled neck.
How do you get to these clean 3D-curves? A quick rundown on your technique would be super helpful as I am starting to understand how to approach a model in general but my 3D-curves tend to be very crooked and without corellations. As im trying to align cvs from one perspective I destroy my alignment in the others :/
The BEST in business! \m/
Hi Eduardo, finally got around to looking at this!
Thank you so much!!!
All good!
Nice!
Thanks!
From the thumbnail I was shocked that AJ would use a surface fill... Just a trimmed boundary- should have known. That aside, the part will be CNC machined out of wood and finished sanded, the fidelity of the CAD won't transfer to the final part...
Both the luthiers that I've been talking with are machining their necks and were struggling with this area. Mainly with controlling the fullness or concavity of the blend into the volute edge. Fullness is ok, sand it back. Both had concavity, so best to fix in the model as auto 'surface fill'er looks bad on an oiled neck.
How do you get to these clean 3D-curves? A quick rundown on your technique would be super helpful as I am starting to understand how to approach a model in general but my 3D-curves tend to be very crooked and without corellations. As im trying to align cvs from one perspective I destroy my alignment in the others :/
3D curves do need references to control each end. I try and fully define them when possible, even with splines with multiple CVs.
Hi, do you also have tutorials showcasing how to take a rhino model and detail/finish it in solid works?!
No sorry.
What s want this make
Patience grasshopper.... it is based on a Les Paul Junior neck.
I want anwer just now
.
Please give me anwer
.