Thanks man 🙏, really wasn't expecting it to sound this good. I really love my ISR LTH and Y-pipe on the G but now I can add the ISR single exit exhaust to that list as well 😃.
@@MemosGarageAZ yessir! Ever since the installation I’ve been checking to see if it runs rich but so far it hasn’t luckily. Now I’m never not in sport mode 🤣
Hey man did you use all 3 hangers. I’m having trouble lining mine with the exhaust exit on my bumper and can’t get the last hanger closest to the exhaust exit to line up with the holes
@@jiro7720 I was wondering this as well. When I installed mine I only remember 2 hangers being on my 2014 370z. I saw his hanger after the first resonator and was wondering if maybe I just missed it on my car but I don’t think I did.
how’s the exhaust i want something loud but i’m afraid that the isr is just not that loud i might just cut the resonator off and put resonated test pipes or some
The consensus is the single exit gives more power over the duals, but I'm sure if you look online you may find arguments for the opposite 😁. I've had both and I prefer the single over the dual set-up.
Hello there, just for the sake of not missing exactly what you're asking about, I'll lay it out like this: the y-pipe left and right side are 2.5", then it funnels down to a 3", the rest of the exhaust system is 3" and I believe the exhaust tip is 4.5". Hope that helps
Hey man I am thinking of buying this setup. Did you have any drone inside the cabin? Also is this the ISR single GT exhaust with the ISR Y pipe? It sounds so good.
Hello there. To be completely honest the drone is very minimal and you really have to pay attention to it to hear it. I can have a normal conversation with a passenger with the windows opened or closed, same with music on.
Hey bro great vid! What gaskets did you use to connect the Isr y pipe ? the flange starts at 2.5 then goes down to 2.75 then merge to a 3inch ? I want no leaks since im going to pair it with isr lth
@@raimelvelazquez7274 Hey man thanks 😃. So I used the gaskets that came with the y-pipe and exhaust system. When I get tuned and add the flame map I'll be going with these thicker ones cause I'm sure the flame map will burn the ones in there now: 2.5" = conceptzperformance.com/czp-xt-extra-thick-2-bolt-25-id-exhaust-gasket-czp-2blt-250-universal_p_63530.php 3": conceptzperformance.com/czp-xt-extra-thick-2-bolt-3-id-exhaust-gasket-czp-2blt-300-universal_p_63425.php. In the G sedan from what I can recall I'm only using the 3 hole polyurethane blue hanger, everything else is stock. Hope that helps man, good luck.
@@raimelvelazquez7274 No the front flanges are 2.5 and the single rear one is 3". So it goes 2.5" front flanges > 2.75" piping > 3" piping > 3" single rear flange.
for the midpipe (idk if thats the right terminology but the piping after the y pipe and before the muffler) does it hang lower than OEM? rn I just have a muffler delete and just lowered my car and my exhaust is scraping
@@exisixen $500 flat no tax or shipping? That's pretty good cause Concept Z is selling it for $450, but I doubt that includes shipping. conceptzperformance.com/isr-performance-single-exit-gt-exhaust-nissan-370z-z34-is-gt-370z_p_30805.php
@@hecticv3624 Yeah it's a beautiful looking exhaust and I'm sure it sounds amazing at WOT but I didn't think it was for me as a daily 😁. See nice VQ's all over Phoenix, been wanting to go to some VQ hangout here one of these days.
@@MemosGarageAZ clean bro I had test pipes and isr on my z33 loved it , took a break from vq platform and tried the v8 dope ass car but a Z will always have my heart , I sold my corvette and got a 14 nismo , in white breaks my neck everytime I walk out it needs a single tho !! I’m use to a decent sounding exhaust cause the v8s , haha I love your orange interior 🤙🏻⭐️goes insane with the black
@@josepineda9740 Thanks man, there's something about a Z that's makes it so dam good looking and a head turner. The current exhaust setup is okay for now, but should be doing ISR LTH at some point, which will make it louder but I'll have to add a resonator or two to make sound okay. Good luck with the Z Nismo, these cars are so dam sexy with a single exit exhaust 😁
Hey bro im about to order the same exhaust hangers you ordered from P2M and i was just wondering how long did it take you to get them? Also what do they mean at check out for the shipping when they say “Wholesale account drop ship”?
Hello there. I actually just checked and I ordered these from Concept Z Performance: conceptzperformance.com/p2m-exhaust-mount-hanger-bushing-set-3-pack-p2-mhb001-gd-universal_p_23117.php Give them a call, they may have these in stock. Good luck.
Here's the link to the adjustable one: conceptzperformance.com/p2m-adjustable-exhaust-mount-hanger-bushing-long-type-3-hole-p2-mhb003-gd-universal_p_23118.php
If I get this on a q50 AWD 2015 3.7 will I need to have a custom extension made or will I just need to order the isr y pipe and isr single exit exhaust.
Hello, yes you'll need an extension since the 370z length is shorter than the G's and Q's. I believe you'll need a 3" extension, but don't quote me in that.
I have this same exhaust on my G. Love it. No drone or rasp really. Great vid, brotha.
Thanks man 🙏, really wasn't expecting it to sound this good. I really love my ISR LTH and Y-pipe on the G but now I can add the ISR single exit exhaust to that list as well 😃.
I have a G and I’m trying to get the same exhaust setup. Do I have to change the Y pipes like he did? And plus do I have to get an extension?
Been thinking of doing this set up. Gonna go ahead and pull the trigger on that it looks and sounds great 👍
Happy to hear that this helped you out on your decision, hope you enjoy/love it as I do 😃
sounds good! currently have the same set up just not the y pipe yet. Might pull the trigger on it now after this!
That's good, the stock y-pipe is really a bad chocking point in the OE exhaust system. Good luck and thanks for watching 😀
Got that set up on my G but with the ISR long tube headers. Hope to meet you one day brotha, your videos are always amazing 💪
Thanks so much brotha, appreciate the support 😃🙏. How does it sound now with the LTH? Still acceptable as a daily? 😁
@@MemosGarageAZ yessir! Ever since the installation I’ve been checking to see if it runs rich but so far it hasn’t luckily. Now I’m never not in sport mode 🤣
@@user-lz3xp7xd5r Hahaha 🤣 nice, I only drive in sport mode 😁
Do you get a horrible rasp on decel from 3k to 2k rpm
I don't at all, sounds like you have an exhaust leak.
Hey man did you use all 3 hangers. I’m having trouble lining mine with the exhaust exit on my bumper and can’t get the last hanger closest to the exhaust exit to line up with the holes
I also only have 2 hangers on my car i only have the first hanger closest to the y pipe and the last hanger closest to the exhaust exit on the bumper
Did you finally get it lined up? If not make sure you don't have the resonator portion backwards.
@@jiro7720 I was wondering this as well. When I installed mine I only remember 2 hangers being on my 2014 370z. I saw his hanger after the first resonator and was wondering if maybe I just missed it on my car but I don’t think I did.
How long did it take to get, just ordered mine!
Actually Concept Z is local to me so I picked everything up the next day LOL
@@MemosGarageAZ that would be nice, wonderful build though keep it up👍
Thanks man, appreciate it. So you also doing the ISR Y-pipe and single exit exhaust system?
how’s the exhaust i want something loud but i’m afraid that the isr is just not that loud i might just cut the resonator off and put resonated test pipes or some
It's pretty tamed with the stock cats, I'm sure with high flow test pipes it'll be much much louder though.
Which gives you more power single exit or dual exit ?
The consensus is the single exit gives more power over the duals, but I'm sure if you look online you may find arguments for the opposite 😁. I've had both and I prefer the single over the dual set-up.
damn it lined up so nice w the bumper love how it looks
Yeah man this thing is super nice. Kind of wish I would have gotten this one for my G instead of the SOHO single exit one.
What size is the opening tip?
Hello there, just for the sake of not missing exactly what you're asking about, I'll lay it out like this: the y-pipe left and right side are 2.5", then it funnels down to a 3", the rest of the exhaust system is 3" and I believe the exhaust tip is 4.5". Hope that helps
Hey man I am thinking of buying this setup. Did you have any drone inside the cabin? Also is this the ISR single GT exhaust with the ISR Y pipe? It sounds so good.
Hello there. To be completely honest the drone is very minimal and you really have to pay attention to it to hear it. I can have a normal conversation with a passenger with the windows opened or closed, same with music on.
And yes this set-up is with the ISR Y-pipe.
Do you have exhaust fumes go into your cabin after install?
Hello, no I don't, not even a little bit.
is this with the y pipe and no headers?
That's correct, stock OEM cats.
Hey bro great vid! What gaskets did you use to connect the Isr y pipe ? the flange starts at 2.5 then goes down to 2.75 then merge to a 3inch ? I want no leaks since im going to pair it with isr lth
Also i have a sedan, would the 3 piece hangers work or i would need to get the other adjustable set to work?
@@raimelvelazquez7274 Hey man thanks 😃. So I used the gaskets that came with the y-pipe and exhaust system. When I get tuned and add the flame map I'll be going with these thicker ones cause I'm sure the flame map will burn the ones in there now: 2.5" = conceptzperformance.com/czp-xt-extra-thick-2-bolt-25-id-exhaust-gasket-czp-2blt-250-universal_p_63530.php
3": conceptzperformance.com/czp-xt-extra-thick-2-bolt-3-id-exhaust-gasket-czp-2blt-300-universal_p_63425.php. In the G sedan from what I can recall I'm only using the 3 hole polyurethane blue hanger, everything else is stock. Hope that helps man, good luck.
@@MemosGarageAZ Thanks for replying! But isn’t the isr y pipe gaskets a 2.75 inch? So wouldn’t the 2.5 from czp be to small?
@@raimelvelazquez7274 No the front flanges are 2.5 and the single rear one is 3". So it goes 2.5" front flanges > 2.75" piping > 3" piping > 3" single rear flange.
@@MemosGarageAZ Okay sounds good! so basically get 2 2.5 extra thick gaskets from czp then 3 3inch for the rest of the exhaust?
for the midpipe (idk if thats the right terminology but the piping after the y pipe and before the muffler) does it hang lower than OEM? rn I just have a muffler delete and just lowered my car and my exhaust is scraping
None of the ISR exhaust parts hang lower than the OEM stuff, I'm sure this is because of the polyurethane exhaust hangers.
@@MemosGarageAZdid you end up keeping it or did you replace the exhaust?
I currently still have the same ISR setup seen in the vid on the Z. Don't plan on changing it anytime soon 😀.
@@MemosGarageAZ the y pipe out of stock rn but a shop told me they can get the single exit for $500 flat worth it or nah?
@@exisixen $500 flat no tax or shipping? That's pretty good cause Concept Z is selling it for $450, but I doubt that includes shipping.
conceptzperformance.com/isr-performance-single-exit-gt-exhaust-nissan-370z-z34-is-gt-370z_p_30805.php
Hey bro , is there any big difference going from dual exit to single exit
Hey man, yes you'll feel a bit more power and torque for sure 😃
@@MemosGarageAZ thanks bro
I have a Tomei on my g37s and I am thinking of going isr
If you're looking for something quieter/more tame this is the way.
@@MemosGarageAZ Yeah man. Tomei is a little too much. Im from Phx too, love the vids 👍🏽
@@hecticv3624 Yeah it's a beautiful looking exhaust and I'm sure it sounds amazing at WOT but I didn't think it was for me as a daily 😁. See nice VQ's all over Phoenix, been wanting to go to some VQ hangout here one of these days.
No test pipes right stock cats ?
Yes sir stock cats.
@@MemosGarageAZ clean bro I had test pipes and isr on my z33 loved it , took a break from vq platform and tried the v8 dope ass car but a Z will always have my heart , I sold my corvette and got a 14 nismo , in white breaks my neck everytime I walk out it needs a single tho !! I’m use to a decent sounding exhaust cause the v8s , haha I love your orange interior 🤙🏻⭐️goes insane with the black
@@josepineda9740 Thanks man, there's something about a Z that's makes it so dam good looking and a head turner. The current exhaust setup is okay for now, but should be doing ISR LTH at some point, which will make it louder but I'll have to add a resonator or two to make sound okay. Good luck with the Z Nismo, these cars are so dam sexy with a single exit exhaust 😁
@@josepineda9740was the test pipes and isr single raspy? I have isr single+ y pipe, i need to order res test pipes but i hope its not raspy
@redlinevqhr Hello, not test pipes on this setup, still on stock cats, but I'm pretty sure of it I add test pipes there will be some rasp.
Sounds good man! Where’d you order from? Mine is on back order
Thanks man, got mine from Concept Z Performance, I got lucky they had in stock. Give them a call, they might still have some in stock.
Hey bro im about to order the same exhaust hangers you ordered from P2M and i was just wondering how long did it take you to get them? Also what do they mean at check out for the shipping when they say “Wholesale account drop ship”?
Hello there. I actually just checked and I ordered these from Concept Z Performance:
conceptzperformance.com/p2m-exhaust-mount-hanger-bushing-set-3-pack-p2-mhb001-gd-universal_p_23117.php
Give them a call, they may have these in stock. Good luck.
Here's the link to the adjustable one:
conceptzperformance.com/p2m-adjustable-exhaust-mount-hanger-bushing-long-type-3-hole-p2-mhb003-gd-universal_p_23118.php
Sounds good 💪🏿💪🏿
Thanks man 😃, sounds better with headphones on LOL
Sound is one thing, how's the performance?
The performance is excellent even without a tune, you can really feel how much this set-up has opened up my exhaust system.
I wonder how the titanium version will sound with that resonated piping section. You think it'll be raspy, or sound just like the one in your video?
Hard to say but historically titanium exhaust system tend to be louder
If I get this on a q50 AWD 2015 3.7 will I need to have a custom extension made or will I just need to order the isr y pipe and isr single exit exhaust.
Hello, yes you'll need an extension since the 370z length is shorter than the G's and Q's. I believe you'll need a 3" extension, but don't quote me in that.
Where can i get your seats lmao?
They're OEM seats and so are the door panels, I'm sure if you look around you could find yourself this same interior.
Sounds stock 😂
You think this setup sounds stock? Not even close my friend, willing to bet that many others would disagree with you as well, thanks for watching.