Thanks again for sharing your experience. That was a nice oak log, didn't look green, I assume it was pretty hard. All three saws looked strong. As you know, I am a little biased, but I think the Dolmar sounded strongest in the middle of the cut.
thanks for commenting! Ya that oak was yard tree so grew in the open pretty dense stuff. I do like the power band of the Dolmar. I can really lean on it and it just keeps cutting. very useful considering I pinch my bar more often than one should. it helps having some grunt to get out of a sticky situation some times.
living in germany bought a Dolmar 6100 for 420€ at 20 years shop celebration. He had 30x 6100 saws and me and a buddy got the two last one. Everybody loves this saw. Sure it could be lighter but it's very well made. Quality is top notch The HUSQVARNA 562 XP is a fine saw too and it's a bit lighter than the 6100 but here were I live, the price for Husqvana is about twice as much. I'm not a professional so I would rather buy two 6100 Dolmar Saws than only one Husqvana
Where did you get the dual felling dogs on the Dolmar? I own a Makita EA6100P and it can only accept the inner dog. I searched all kinds of aftermarket sights but no one makes them for that saw. Or at least not anymore. I found several blogs about using the clutch cover and dogs off the EA5600F which the European version of the EA6100P comes with the EA5600F inner dog. By switching the clutch cover out which fits fine and is heavier material you can mount the EA5600F outer dog as well. You do have to shorten the chain catch on the EA5600F cover to get it to fit the EA6100. I shortened it with a mini tubing cutter. Your set up looks a hell of a lot easier though. My EA5000P is set up like yours from the factory.
1porsche965 the torque of the 6100 really fits my cutting preference. nothing like dogging into a solid hickory log. thank you for watching and taking the time to comment.
I stumbled across your 562xp vid then this one. As Im watching it's apparent this man can run a saw. I see so many that jam the dang bar in the wood and bog the heck out of it. Nice job. Tell your helper she did great!
i just got a 'forgotten , triple nickel' from a guy for a 100 bucks. parts in a milk crate, left in a barn for 6 years. bar bent , missing parts. cleaned it out and it took a while but now its screaming. new bar and chain, new air filter , bolts, clips, now its a back up saw for my ms362. nice video.
I have run the 555 and 562, and I thought the 555 was easy to handle and expected (by the numbers) that as power increases so does the noise and vibration. But I was very impressed with the 562. Very solid performance and every bit as smooth as the 555. I appreciate what Husky designed their intent for the555 was, but I truly think the 562 is improved in every way. I wouldn't mind either one, as it turns out.
For sure. I had a dealer steer me wrong on carb settings. He told me 2&1/2 ccw low and 3ccw on high. Ran like shit. I found dolmar specs PDF for 6100 low 1&1/2 ccw high 2&1/2 ccw write that in your manual. Saw was like new again.
thanks for the demo. I'm looking at the 6100 for an all arounder.I've considered the562xp also... both seem to be capable. I have a tendency to grab my 60 cc for everything.that's why she's getting tired. do you run a 5105 at all ? Thanks
thanks for watching and taking the time to comment. I as well prefer a 60cc as a great all around. both the 562 a 6100 will get the job done and put a smile on your face while doing it. I have not ran a 5105 other then just playing with it while shopping for the 6100. it is a fine saw but I like the 6100 better for my needs. I prefer a 40cc 60cc combo. but that is me.
Good test. Looked to me like the Dolmar was the runner in that bunch but it is more broken in also. What did you think? Also. The camera girl did a fine job!
I am most comfortable and honestly they all feel strong. the 6100 feels like it has more torque and better manners, if that makes sense. the 562 feels more high strung.
@@fuelediowa - you are running the husky too high in it's power band. Get it to it's sweet-spot around 8,000 and lean into it and give it gas. Keep the pressure on it to keep the speed at 8,000. The Dolmar likes to run at higher RPM - like 11,000 - it seems you like that better too so it works better for you - although the 562 was the fastest cutter of the 3..
After spending the last year working on chainsaws and everything else, there are two brands I will never EVER buy. Troy-Bilt and Husqvarna. I would rather have an old Poulan. Thank you this is was a great video. Also, big props the camera person. They did a fabulous job and I appreciate them filming this.
Thank you very much for watching and taking the time to comment. Lots of great saws out their and a lot of companies cutting corners as well though. Hard for consumers to tell what is actually good.
I've got a 7900 and a 550xp. I'm stuck between getting a 6100 or a 562xp/2260 and probably selling the 7900. Great saw, just not cutting the huge logs like I used to. I love my 550xp, have you ran one of those against the 6100 and or 562?
JustonianInstitute I have ran a 550 but not side by side of the 6100 or 562. the 562 has a lot of familiarity with the 550 and if you love the 550 it would be hard not to like the 562. I like the torque/ power band of the 6100 slightly better but that is more of cutting style and feel in hand. I am heavy handed at times. i do like the starting and air filtration a lot better on the 6100.
Fueled Iowa thanks man, exactly what I was looking for. One thing I do appreciate about my 7900 besides crazy power is the dead nuts reliability. Always starts after a few pulls, even when hot or cold and just runs all day without fuss. Unlike my 550 which has hot start issues. I'm leaning more towards the 6100 for that point plus I don't have to take the saw to a dealer for tuning (firmware) updates on the AT, I can just tune at home. Does the 6100 use the same bar mount as the 6400/7300/7900?
Like what you are doing, but as usual these are "ball" parks as the bar & chain along with other things add a few percentage points here and there, folks can read into these what ever they choose..like the fact you tried to minimize those things, all three are great saw choices.
You are correct, hitting a good knot or two can definitely throw some things off. Also cut speed really is limited to the reality of what truly make a good fit for a saw. Feel, balance, starting, all kinds of things can definitely make one saw feel a lot better than another to use all day and sometimes we can't even tell specifically what that may be. Lol. Thanks for watching and taking the time to comment. Have a great day.
A lot depends on how you run your saws. The Dolmar has a slightly bigger displacement and makes it's HP at a higher RPM than the 562xp. If you like that, you cut better with a higher revving saw. I've used 562's for some time - just bought a new one this year and can tell you the latest edition is quite a bit better worked out - but still a lower revving saw for maximum power than the Dolmar. Also, running out of gas would have effected the auto-tune and it would not have been at it's best once you fueled it up again for a few cuts. In any case, if my timing is right (stopwatch) the first cut with the 562xp (12.3s) matched the first cut with Dolmar (12.4s) pretty closely. Sorry for sounding like a Husky fanboy, but it seems to be taking quite a beating from this crowd.
No worries, I agree running out of fuel would change the tune. I however feel the 562 is the higher reving saw. But I have not ran a tac on one while running it. Feel can be deceiving though. Thank you for watching and taking the time to comment.
That's not true. The Dolmar 6100 got way more torque power at lower rpm's. It's more like a diesel car (just a metaphor). Husqvarna and Stihl saws usually need high rpm's to deliever their cutting performance.
great video bud. heres the only bit of advice i would give is the 6100 is more of a home owner saw (a really really good one) but get the 6400 if you're going to use it professionally. but thats just my opinion
how does sugi compare to Oregon and carlton?, im told carlton is better than Oregon and sugi is priced thru roof. On hardwood you used non sprocket tip...tru or false?
I have never owned a Carlton so I am not sure how they compare to others. Sugi and Tsumara have a lot better steel. And where a lot better. Oregon is a standard go to but with their prices continuing to go up the more I lean to Tsumara. Non sprocket nose or hard nose are best for dirty conditions like when logs are dragging through the timber to be processed at a different location.thanks for watching and taking the time to comment.
Hey Iowa, where did you get the dual dogs? Also, the 6401 has a mag clutch cover with a chip flap, I want that on my damn 6100. The build quality on the saw you know is top notch except for the clutch cover. I have an 044 mag, a 461, an 029 (for sale but no one is buying) and a couple top handles and my dolmar/makita is by far my favorite saw. I love the stihls but oh my lord, these 6100's are just so hard to beat. A little wide like you said but hey, can't have it all.
erik johannessen I got the double dogs from Nate here performanceoutdoorequipment.com he also offers hooked me up with a wrap bar last year. the wrap bar definitely doesn't make the saw narrower. lol
It was my Christmas gift last year from my wife so i don't know exactly but I think it was $65 or $75. I really like it on steep hill sides. Gives a lot of manipulation without having to walk around as much. That is also where I really like the 24" bar that and limbing and bucking when I don't want to bend over lol. _lh3.googleusercontent.com/ql1_TztTUQYc_RSXD0-VXU8ty5xbk7Y6XUY-3XbwfW_1q756hQH_JPtAUOEGdMEw3fa9Mya__
@@g.d.7629 I have a 2260 also, and just picked up a used 6100 for less than 300 at home depot (I thought I was buying a 6400 from the add - but got there and it was a 6100). But, cut yesterday, and that thing really surprised me. It is light, and super strong. The 2260 (562) has a little more on top, but the 6100 has more all around torque. It was also lighter than I thought it was going to be. I really like it, and though I guess Dolmar is getting put out of business by Makita in the next couple years, I think they are great saws. I also have a 7900, and a 510 (that used to have epoxy screws and a cat). They are all strong, smooth, though the 510 is a little porky for power, and needs to be ported. But, the 6100 really surprised me, and put a smile on my face, even stock.
Thank you for watching and taking the time to comment. Yes a echo 620 would compare. I have ran the 620 a little bit it has a different power band that to me is less then exciting. Also the ergonomics where not as comfortable as the 6100 in my hands. Not a bad saw the 620. But if you have the chance running the two side by side would be awesome.
I have had good luck with the Oregon speed cut light bar and a good 3\8 chain I sharpen all my own chains and I can make most cut really good. I usually use a champer are simi chisel gust for a bit more time between sharpening. Not quite as fast but I never cut production.
Hi, I like your husky 555, if you were closer to me I would trade you my never used stihl ms291. I never cut a stick with it. I wanna make switch to husqvarna
john reilly well the blue will not be around much longer. all the Makita's will be orange/ red . the 6100 takes a while to fully break in. are you planning on porting it? I have seen some of your solos scream!
hi from n.z....go red. if your workin close to dark and after havin a slash in the bush and go disorientated ull see a red saw easier tha blue, blue blends in with blue gum leaf as color is almost same. another idea is to put a little reflective tape just in case darkness gets you in bad time.
5105 is lighter and fast and powerful enough for all medium size jobs. 6100 is nice - but no real need for extra weight, extra money, and that tiny little bit of difference in the power. Lighter saw is nicer to work with. I HIGHLY Recommend 5105. But 6100 is very nice too.
Dolmar is By Far a BETTER Saw. Way higher quality. Better torque, better balance. Lighter, more powerful. Sounds better and WAY NICER TO USE than Any STIHL. I am speaking from experience - a Lot of it.
I have a 6100 coming in the mail tomorrow, finally pulled the trigger on one. Your videos of the 6100 was the main reason. Im surprised at how it cuts faster than the 555 and 562xp you have. Have you kept yours all stock? should I open up the muffler any?
Thank you for watching and taking the time to comment. My 6100 is still stock. I will say break in on my 6100 took the longest of any saw I have ever owned. Not sure if it is the read valves or just that tight. It is a bit of a challenge to tune as well. As in hard to tell the difference. I speculate the carb has a higher flow bypass port then most saws. So tunning it in wood is easiest. Best of luck and if you have any questions feel free to ask.
@@fuelediowa Welll I sold the 6100. I didnt like the easy start, the plastic clutch cover, and the size and weight. I also have a 562xp and they are much smaller, slimmer. They have the mag clutch cover, regular starter, and it is also lighter. In my preference I definitely would pick the 562xp over the 6100. I run .325 on my 562xp, I installed the small 7 spline clutch drum, a 550xp clutch, and then use Stihl mount D025 bars, plus the bar adapter. Im using a 18" narrow kerf bar, the speed cut aluminum core, really makes the 562 light and a great firewood cutter. I removed the screen from the muffler, and that was it. Wanted to tell you if you like the 6100, a saw you should really try before they are gone is a Makita 6421. I got one and absolutely love it. I installed a non cat 6401 muffler, and a sugi hara light weight bar, removed the bar spikes, put a smaller inner one on, its a saw that I really like. Youll need the double d carb tool to tune the 6421 just like the 6100.
Im not biased towards one saw make or another. I purchased a Dolmar 6100 brand new, tried it out and then turned right around and sold it within days. I just couldnt believe why Dolmar made it so huge!? It was heavy, dumb easy start system on it, plastic clutch cover, if Dolmar could re do the 6100, put a normal starter on it, magnesium clutch cover, and make it overall smaller and lighter like the 562xp is, it would of been a great saw. Ive opened up the muffler on my 562xp, running very strong and dependable, plus the 562 just looks better. I would have never sold my 6100 if it was the same size and weight of the 562.
Wow on my scale a 562 and 6100 with a 24" bar the 6100 is lighter. Those large mount bars add a fair bit of weight.. also I have never had to modify my 6100. But looks and feels are subjective. To me the 6100 feels better all day long. And so easy to start. 4 years almost and never a hiccup.
@@fuelediowa and I bet with a 28" or 32" bar it would even heavier...both the 555 and 560xp have the small bar mount if thats what you want then you'd pick one of those models. You can easily run lighter .325 bars on the 562 with a bar adapter, I run .325 on my 562, nice light saw powerful fast cutting saw. Theres just nothing you can do about the size of the 6100..
@@benfeltzer4359 I would not want to do anything to the size. It is not as cramped as the 562 platform. With the 562, 555, 560, I feel like I am trying to cross my arms. The 6100 gives me a much better feel of control and leverage.
... “Im not biased towards one saw make or another.” Sure you’re not, uh huh... 🤔🙄😄😂 yeah, if Dolmar would completely redo the 6100, ole Ben might like it? 😂🤣
erik johannessen I got the 24" from performanceoutdoorequipment.com if I remember correctly it was around $80. they hold up really well. thank you for watching and taking the time to comment. I hope you are as happy with your 6100 as I am with mine.
Fueled Iowa excuse my language but fuck yeah I am. Love that saw on the ground and climbing. I like how people don't know about them but when they see the damage it does, especially a Stihl lover holding an ms362 lol, they are questioning their life choices. Take it easy brother!!!
nkcwilliams the pro-lite is a good firewood bar. they fall a bit short on the production side and show their cost cutting fairly quickly. but can last a guy in firewood guy many years if taken care of properly. plus being lighter is nice to carry around.
I've had both of these in big ash. Tuned correctly. The 6100 was substantially faster with 20 inch bars buried. Holds heigher rpm under load lands down.
![🔴 ฟุตบอลแชมป์กีฬา 7HD แชมเปียน คัพ 2024 [รอบรองชนะเลิศ]](http://i.ytimg.com/vi/zPm8ClLVhoE/mqdefault.jpg)
Thanks again for sharing your experience. That was a nice oak log, didn't look green, I assume it was pretty hard. All three saws looked strong. As you know, I am a little biased, but I think the Dolmar sounded strongest in the middle of the cut.
thanks for commenting!
Ya that oak was yard tree so grew in the open pretty dense stuff.
I do like the power band of the Dolmar. I can really lean on it and it just keeps cutting. very useful considering I pinch my bar more often than one should. it helps having some grunt to get out of a sticky situation some times.
Pack a pouch of wedges. Works for me.
living in germany bought a Dolmar 6100 for 420€ at 20 years shop celebration. He had 30x 6100 saws and me and a buddy got the two last one. Everybody loves this saw. Sure it could be lighter but it's very well made. Quality is top notch
The HUSQVARNA 562 XP is a fine saw too and it's a bit lighter than the 6100 but here were I live, the price for Husqvana is about twice as much. I'm not a professional so I would rather buy two 6100 Dolmar Saws than only one Husqvana
Where did you get the dual felling dogs on the Dolmar? I own a Makita EA6100P and it can only accept the inner dog. I searched all kinds of aftermarket sights but no one makes them for that saw. Or at least not anymore. I found several blogs about using the clutch cover and dogs off the EA5600F which the European version of the EA6100P comes with the EA5600F inner dog. By switching the clutch cover out which fits fine and is heavier material you can mount the EA5600F outer dog as well. You do have to shorten the chain catch on the EA5600F cover to get it to fit the EA6100. I shortened it with a mini tubing cutter. Your set up looks a hell of a lot easier though. My EA5000P is set up like yours from the factory.
That Dolmar 6100 sure has torque! Faster than it sounds.
1porsche965 the torque of the 6100 really fits my cutting preference. nothing like dogging into a solid hickory log.
thank you for watching and taking the time to comment.
I stumbled across your 562xp vid then this one. As Im watching it's apparent this man can run a saw. I see so many that jam the dang bar in the wood and bog the heck out of it. Nice job. Tell your helper she did great!
Yeah, the RPMs sounded good on all three.
Where did you get your felling spikes for the 6100?
Sorry for the delay. I honestly cant remember for sure. I think a Dealer out in Ohio had them made. Nathan something I think.
i just got a 'forgotten , triple nickel' from a guy for a 100 bucks. parts in a milk crate, left in a barn for 6 years. bar bent , missing parts. cleaned it out and it took a while but now its screaming. new bar and chain, new air filter , bolts, clips, now its a back up saw for my ms362. nice video.
Great! Thanks for featuring Your 6100!
I have run the 555 and 562, and I thought the 555 was easy to handle and expected (by the numbers) that as power increases so does the noise and vibration. But I was very impressed with the 562. Very solid performance and every bit as smooth as the 555. I appreciate what Husky designed their intent for the555 was, but I truly think the 562 is improved in every way. I wouldn't mind either one, as it turns out.
Great Video, and your camera person was delightful! 👍👍👍✌🏻🇺🇸
6100 👍💪👍
The 6100 isn't THAT heavy. But cuts VERY fast and smooth!!
Wow that Dolmar rips. Nice saw.
I have a dolmar 6100. For the price it is an awesome saw for sure
For sure. I had a dealer steer me wrong on carb settings. He told me 2&1/2 ccw low and 3ccw on high. Ran like shit. I found dolmar specs PDF for 6100 low 1&1/2 ccw high 2&1/2 ccw write that in your manual. Saw was like new again.
There 50cc saws are 1&1/2 low and high!!!
@@g.d.7629 what do you mean with ccw ? Screw turns ?
@@ImplantedMemories COUNTER CLOCK WISE from seated position. You sound like you need to go to dealer.
@@g.d.7629 Sorry I'm not a native english speaker.
thanks for the demo. I'm looking at the 6100 for an all arounder.I've considered the562xp also... both seem to be capable. I have a tendency to grab my 60 cc for everything.that's why she's getting tired. do you run a 5105 at all ? Thanks
thanks for watching and taking the time to comment. I as well prefer a 60cc as a great all around. both the 562 a 6100 will get the job done and put a smile on your face while doing it. I have not ran a 5105 other then just playing with it while shopping for the 6100. it is a fine saw but I like the 6100 better for my needs. I prefer a 40cc 60cc combo. but that is me.
Where did you get those dawgs on that Dolmar! I need them!
Good test. Looked to me like the Dolmar was the runner in that bunch but it is more broken in also. What did you think? Also. The camera girl did a fine job!
I am most comfortable and honestly they all feel strong. the 6100 feels like it has more torque and better manners, if that makes sense. the 562 feels more high strung.
@@fuelediowa - you are running the husky too high in it's power band. Get it to it's sweet-spot around 8,000 and lean into it and give it gas. Keep the pressure on it to keep the speed at 8,000. The Dolmar likes to run at higher RPM - like 11,000 - it seems you like that better too so it works better for you - although the 562 was the fastest cutter of the 3..
How is your 6100 holding up thinking about getting one , I see this video is a few years old now
After spending the last year working on chainsaws and everything else, there are two brands I will never EVER buy. Troy-Bilt and Husqvarna. I would rather have an old Poulan. Thank you this is was a great video. Also, big props the camera person. They did a fabulous job and I appreciate them filming this.
Thank you very much for watching and taking the time to comment. Lots of great saws out their and a lot of companies cutting corners as well though. Hard for consumers to tell what is actually good.
I've got a 7900 and a 550xp. I'm stuck between getting a 6100 or a 562xp/2260 and probably selling the 7900. Great saw, just not cutting the huge logs like I used to.
I love my 550xp, have you ran one of those against the 6100 and or 562?
JustonianInstitute I have ran a 550 but not side by side of the 6100 or 562. the 562 has a lot of familiarity with the 550 and if you love the 550 it would be hard not to like the 562. I like the torque/ power band of the 6100 slightly better but that is more of cutting style and feel in hand. I am heavy handed at times. i do like the starting and air filtration a lot better on the 6100.
Fueled Iowa thanks man, exactly what I was looking for. One thing I do appreciate about my 7900 besides crazy power is the dead nuts reliability. Always starts after a few pulls, even when hot or cold and just runs all day without fuss. Unlike my 550 which has hot start issues.
I'm leaning more towards the 6100 for that point plus I don't have to take the saw to a dealer for tuning (firmware) updates on the AT, I can just tune at home.
Does the 6100 use the same bar mount as the 6400/7300/7900?
JustonianInstitute no it uses the K095 same as the 550 bar mount.
get the 6400.
Chris Hardway 6400 does not make sense to me. same weight and size as the 7900. I would take the 7900. 6400 just makes no sense to me.
Like what you are doing, but as usual these are "ball" parks as the bar & chain along with other things add a few percentage points here and there, folks can read into these what ever they choose..like the fact you tried to minimize those things, all three are great saw choices.
You are correct, hitting a good knot or two can definitely throw some things off. Also cut speed really is limited to the reality of what truly make a good fit for a saw. Feel, balance, starting, all kinds of things can definitely make one saw feel a lot better than another to use all day and sometimes we can't even tell specifically what that may be. Lol. Thanks for watching and taking the time to comment. Have a great day.
WOW. MAKITA EA6100 IS A MONSTER.
PLEASE MAKE MORE VIDEOS ABOUT EA6100.
I will try it is a very busy season for me right now. Would so love to be out in the timber. Thanks for watching and taking the time to comment.
A lot depends on how you run your saws. The Dolmar has a slightly bigger displacement and makes it's HP at a higher RPM than the 562xp. If you like that, you cut better with a higher revving saw. I've used 562's for some time - just bought a new one this year and can tell you the latest edition is quite a bit better worked out - but still a lower revving saw for maximum power than the Dolmar. Also, running out of gas would have effected the auto-tune and it would not have been at it's best once you fueled it up again for a few cuts. In any case, if my timing is right (stopwatch) the first cut with the 562xp (12.3s) matched the first cut with Dolmar (12.4s) pretty closely.
Sorry for sounding like a Husky fanboy, but it seems to be taking quite a beating from this crowd.
No worries, I agree running out of fuel would change the tune. I however feel the 562 is the higher reving saw. But I have not ran a tac on one while running it. Feel can be deceiving though. Thank you for watching and taking the time to comment.
That's not true. The Dolmar 6100 got way more torque power at lower rpm's. It's more like a diesel car (just a metaphor). Husqvarna and Stihl saws usually need high rpm's to deliever their cutting performance.
Just picked up my 1st Dolmar ps-5100s and like to compare it with my 346xp Ne. This should be fun.
great video bud. heres the only bit of advice i would give is the 6100 is more of a home owner saw (a really really good one) but get the 6400 if you're going to use it professionally. but thats just my opinion
Chris Hardway thank you for watching and taking the time to comment.
have a great evening.
I picked up the 6400, i agree, freakin awesome saw for the money. Runs as good as my $1,100 stihls
Whatchoo smokin? 6100 is considered to be a pro/ semi pro level saw. Hardly a ‘ home owner’ saw. Seriously!
The 6100 is the replacement for the 6400 series. It is absolutely not a Homeowner saw.
how does sugi compare to Oregon and carlton?, im told carlton is better than Oregon and sugi is priced thru roof. On hardwood you used non sprocket tip...tru or false?
I have never owned a Carlton so I am not sure how they compare to others. Sugi and Tsumara have a lot better steel. And where a lot better. Oregon is a standard go to but with their prices continuing to go up the more I lean to Tsumara. Non sprocket nose or hard nose are best for dirty conditions like when logs are dragging through the timber to be processed at a different location.thanks for watching and taking the time to comment.
Can you comment on the anti-vibe of the saws... Seems Dolmars have the best AV... your thoughts?
562xp AV is the best,try it.
The Dolmars are real smooth. 562 is smooth too. But, no vibes with the bigger dolmars.
Hey Iowa, where did you get the dual dogs? Also, the 6401 has a mag clutch cover with a chip flap, I want that on my damn 6100. The build quality on the saw you know is top notch except for the clutch cover. I have an 044 mag, a 461, an 029 (for sale but no one is buying) and a couple top handles and my dolmar/makita is by far my favorite saw. I love the stihls but oh my lord, these 6100's are just so hard to beat. A little wide like you said but hey, can't have it all.
erik johannessen I got the double dogs from Nate here
performanceoutdoorequipment.com he also offers hooked me up with a wrap bar last year. the wrap bar definitely doesn't make the saw narrower. lol
Fueled Iowa how much for the wrap?
It was my Christmas gift last year from my wife so i don't know exactly but I think it was $65 or $75. I really like it on steep hill sides. Gives a lot of manipulation without having to walk around as much. That is also where I really like the 24" bar that and limbing and bucking when I don't want to bend over lol.
_lh3.googleusercontent.com/ql1_TztTUQYc_RSXD0-VXU8ty5xbk7Y6XUY-3XbwfW_1q756hQH_JPtAUOEGdMEw3fa9Mya__
The 6100 felt like carrying around an 80cc saw
It should be about 13.8 lb powerhead or less.
I have jonsered 2260 that I love. Between it and 6100 don't know which is quicker. I got 2260 when husq phazed them out.
U prob been running 50cc saws.
@@g.d.7629 I have a 2260 also, and just picked up a used 6100 for less than 300 at home depot (I thought I was buying a 6400 from the add - but got there and it was a 6100). But, cut yesterday, and that thing really surprised me. It is light, and super strong. The 2260 (562) has a little more on top, but the 6100 has more all around torque. It was also lighter than I thought it was going to be. I really like it, and though I guess Dolmar is getting put out of business by Makita in the next couple years, I think they are great saws. I also have a 7900, and a 510 (that used to have epoxy screws and a cat). They are all strong, smooth, though the 510 is a little porky for power, and needs to be ported. But, the 6100 really surprised me, and put a smile on my face, even stock.
Go to the Gym more! 😂
I wonder if an Echo 620p would compare to the 6100?
Thank you for watching and taking the time to comment. Yes a echo 620 would compare. I have ran the 620 a little bit it has a different power band that to me is less then exciting. Also the ergonomics where not as comfortable as the 6100 in my hands. Not a bad saw the 620. But if you have the chance running the two side by side would be awesome.
What’s the best bar/chain combo for the 6100. Need to replace
I have had good luck with the Oregon speed cut light bar and a good 3\8 chain I sharpen all my own chains and I can make most cut really good. I usually use a champer are simi chisel gust for a bit more time between sharpening. Not quite as fast but I never cut production.
Hi, I like your husky 555, if you were closer to me I would trade you my never used stihl ms291. I never cut a stick with it. I wanna make switch to husqvarna
Lol well I probably wouldn't trade a 555 for a 291. Now a fresh 044 maybe. The 555 is a good saw that is to under rated.
Which do you prefer
I prefer the dolmar 6100. It starts easier and has a power curve I prefer.
@@fuelediowa did you modify the exhaust.? I just got one and seems to have a dead spot off the bottom
I I want the 6100 I can't make up my mind which color I want orange or blue
john reilly well the blue will not be around much longer. all the Makita's will be orange/ red . the 6100 takes a while to fully break in. are you planning on porting it? I have seen some of your solos scream!
spend the money and get a 6400
hi from n.z....go red. if your workin close to dark and after havin a slash in the bush and go disorientated ull see a red saw easier tha blue, blue blends in with blue gum leaf as color is almost same. another idea is to put a little reflective tape just in case darkness gets you in bad time.
5105 is lighter and fast and powerful enough for all medium size jobs. 6100 is nice - but no real need for extra weight, extra money, and that tiny little bit of difference in the power. Lighter saw is nicer to work with. I HIGHLY Recommend 5105. But 6100 is very nice too.
@@conmanumber1 I get your point, but if it's too dark to see your saw right next to you, you probably shouldn't handle a chainsaw anymore.
Dolmar is By Far a BETTER Saw. Way higher quality. Better torque, better balance. Lighter, more powerful. Sounds better and WAY NICER TO USE than Any STIHL. I am speaking from experience - a Lot of it.
I really like my Dolmar's. I get to play with a fair amount of saws as well. And they just fit well for my wants. Lol
yup
I have a 6100 coming in the mail tomorrow, finally pulled the trigger on one. Your videos of the 6100 was the main reason. Im surprised at how it cuts faster than the 555 and 562xp you have. Have you kept yours all stock? should I open up the muffler any?
Thank you for watching and taking the time to comment. My 6100 is still stock. I will say break in on my 6100 took the longest of any saw I have ever owned. Not sure if it is the read valves or just that tight. It is a bit of a challenge to tune as well. As in hard to tell the difference. I speculate the carb has a higher flow bypass port then most saws. So tunning it in wood is easiest. Best of luck and if you have any questions feel free to ask.
@@fuelediowa Welll I sold the 6100. I didnt like the easy start, the plastic clutch cover, and the size and weight. I also have a 562xp and they are much smaller, slimmer. They have the mag clutch cover, regular starter, and it is also lighter. In my preference I definitely would pick the 562xp over the 6100. I run .325 on my 562xp, I installed the small 7 spline clutch drum, a 550xp clutch, and then use Stihl mount D025 bars, plus the bar adapter. Im using a 18" narrow kerf bar, the speed cut aluminum core, really makes the 562 light and a great firewood cutter. I removed the screen from the muffler, and that was it. Wanted to tell you if you like the 6100, a saw you should really try before they are gone is a Makita 6421. I got one and absolutely love it. I installed a non cat 6401 muffler, and a sugi hara light weight bar, removed the bar spikes, put a smaller inner one on, its a saw that I really like. Youll need the double d carb tool to tune the 6421 just like the 6100.
Which saw do you like better?
I like the 6100 the best. It just fits me best. Thanks for watching and taking the time to comment.
I wonder how the 6100 would do against the Echo 620P?
That would be a great one to add in the mix.
6100 would eat it for Lunch! Seriously, the CS 620:is a fine saw, and YES, that would be killah comparo!
That's a bad ass saw, i need that when i start chopping folks up
Iceberg slim the 6100 has the best chip Clarence and easiest to clean up. Lol. thanks for whatching
They will haul u away put u in rubber room
The carb settings on dolmar 6100 are low (flat screw) 1&1/2 ccw. High is D shape 2&1/2 ccw will run like new.
Dolmar Shines Again.
Im not biased towards one saw make or another. I purchased a Dolmar 6100 brand new, tried it out and then turned right around and sold it within days. I just couldnt believe why Dolmar made it so huge!? It was heavy, dumb easy start system on it, plastic clutch cover, if Dolmar could re do the 6100, put a normal starter on it, magnesium clutch cover, and make it overall smaller and lighter like the 562xp is, it would of been a great saw. Ive opened up the muffler on my 562xp, running very strong and dependable, plus the 562 just looks better. I would have never sold my 6100 if it was the same size and weight of the 562.
Wow on my scale a 562 and 6100 with a 24" bar the 6100 is lighter. Those large mount bars add a fair bit of weight.. also I have never had to modify my 6100. But looks and feels are subjective. To me the 6100 feels better all day long. And so easy to start. 4 years almost and never a hiccup.
@@fuelediowa and I bet with a 28" or 32" bar it would even heavier...both the 555 and 560xp have the small bar mount if thats what you want then you'd pick one of those models. You can easily run lighter .325 bars on the 562 with a bar adapter, I run .325 on my 562, nice light saw powerful fast cutting saw. Theres just nothing you can do about the size of the 6100..
@@benfeltzer4359 I would not want to do anything to the size. It is not as cramped as the 562 platform. With the 562, 555, 560, I feel like I am trying to cross my arms. The 6100 gives me a much better feel of control and leverage.
What I’ve seen on the specks of the saws the husky 562 weighs a little over 13 pounds and the dolmar is over 14 pound the 562 is quite a bit lighter
... “Im not biased towards one saw make or another.”
Sure you’re not, uh huh... 🤔🙄😄😂
yeah, if Dolmar would completely redo the 6100, ole Ben might like it? 😂🤣
Dolmar 💪
Ya I have had the option for many saws the past 4 years. My 6100 is still the saw I am most possessive over. Even over my Husq Master Mined 395.
That 6100 rips
Yes it does. It is by far my favorite saw I have ever used. Thank you for watching and taking the time to comment.
Also how much did you pay for those Sugi's? Want a 24"
Much appreciation for your 6100 videos, you're the reason I bought one. Greetings from the PNW
erik johannessen I got the 24" from performanceoutdoorequipment.com
if I remember correctly it was around $80. they hold up really well.
thank you for watching and taking the time to comment. I hope you are as happy with your 6100 as I am with mine.
Fueled Iowa excuse my language but fuck yeah I am. Love that saw on the ground and climbing. I like how people don't know about them but when they see the damage it does, especially a Stihl lover holding an ms362 lol, they are questioning their life choices. Take it easy brother!!!
i have a 6400 and a ms362. the 362 tires my hands out faster than my dolkita saw
Nice video 👍
Thank you.
You did good Bella
How do you like that Oregon Pro-Lite bar?
nkcwilliams the pro-lite is a good firewood bar. they fall a bit short on the production side and show their cost cutting fairly quickly. but can last a guy in firewood guy many years if taken care of properly. plus being lighter is nice to carry around.
6100 is the winner.
The 6100 is still my favorite saw. Thank you for watching and taking the time to comment.
All within a second of each other. 562 was fastest.
Texas Edge thanks for watching and taking the time to comment.
I have a Echo 590 and a 6100. Up to about 18 inches the 6100 is faster but above that the Echo 590 starts to pull ahead
I always wanted to try one. I just never had the chance.
I've had both of these in big ash. Tuned correctly. The 6100 was substantially faster with 20 inch bars buried. Holds heigher rpm under load lands down.