I like the camera for the Parking Collision option but I dont like it enough to start soldering and stripping existing cables. For now I'll just keep parking away from everyone in the garage.
Is it possible to have the 520 as a dash cam and the cmos 320 as a back up on a dmx 9706s. I have to 520 installed and working great but just installed the 320 but it works just like a normal backup except I can change the view with the button it comes with. I can't change any of the settings. Or can you only have one smart camera with enhaced controls?
I'm about to install this dash cam into my Kenwood head unit. Do the connections to the head unit harness need to made after the harness is already connected to the head unit? Thanks.
I have a drv n520 with ddx9905S and I only have Forward Collision and Departure Delay warnings in the menu. No Lane Departure warning to turn on or off. How is that possible? I have my 9905s on the latest firmware but I couldn't find any updates for the n520 camera. What gives???
It's supposed to be constantly be given power correct? I got one installed but it does not record when the vehicle is off and I wanted to know if that could be possible? From your video it seems yes
I see that you hard wired the yellow , red and black wires for power but what are the two outputs on the back of the unit that are labelled cam + and cam - for ?
@@isaiahwm do you know which position they're in on the back of the head unit? I have a unit I bought second hand, and there are no cam wires coming from the head unit, meaning my CMOS 320 is working just not view switching
I know there isn't much comments but I hope someone can help me. I have the kenwood drv-330 I was in a collision . As I turned car of I don't know why but I pulled sd card out to make sure footage doesant go anywhere . But now when I went to play it back it won't play it and I put sd card to laptop and can't get it there either. Does anyone know what happend. Please I need help .
Hi Armen, suggest reading the instruction manual for this or email kenwood direct for some more information regarding the way it records and saves files. Hope this helps.
New message to: allanzshop Hi Great video I was able to do the install OK but have one question. Do you have any ideas why I cannot get the onscreen operating buttons to show up on screen? I have the camera installed and working using the manual buttons on the camera but I do not get the option to access the onscreen. So I cannot use any of the features of the dashcam IE lane departure warning etc. I have linked the dashcam to my Kenwood Head Unit model DDX920WDABS. I have checked and doubled checked the settings but feel I must be missing something.
Just curious.....who makes that hot pink soldering iron you are using haha. Seriously though, who makes it? Thanks. Morgan
Hi, followed the instructions. Dash cam getting good power, but head unit now got no power. Fuses all look ok. Any idea? Thanks
How do you change the clock on the Dashboard Camera DRV-N520n from am to pm?
Can you please tell me what you did in the av section. I got this camera installed today and it is not showing up as a dash camera only front camera.
I like the camera for the Parking Collision option but I dont like it enough to start soldering and stripping existing cables. For now I'll just keep parking away from everyone in the garage.
Can you please do a video on how to delete files and set up for continuous record the Kenwood DRV 410 I am not computer savvy
Can you record a feed from your rear view/backup camera as well? This is helpful for rear collisions
Is it possible to have 2 of those dash cams installed in the system? One as a rear dash cam?? Thanks!
You can gowith 2 cam with ke wood 2017 series . They support dual cam input without add extra module
Is it possible to have the 520 as a dash cam and the cmos 320 as a back up on a dmx 9706s. I have to 520 installed and working great but just installed the 320 but it works just like a normal backup except I can change the view with the button it comes with. I can't change any of the settings. Or can you only have one smart camera with enhaced controls?
I just did this today. I actually undid the wires and rewire them instead of soldering them. Do you know if it's possible to pause the recording?
Need to find the leads for this cam.
I'm about to install this dash cam into my Kenwood head unit. Do the connections to the head unit harness need to made after the harness is already connected to the head unit? Thanks.
How is camera when you're driving at night is it clear?
@@andyt5411 yes, I’ve found it to be pretty clear. I’m very happy with the camera!
Is there a rear camera available? I really like this system. Seems much better than try to down load to a smart phone.
I have a drv n520 with ddx9905S and I only have Forward Collision and Departure Delay warnings in the menu. No Lane Departure warning to turn on or off. How is that possible? I have my 9905s on the latest firmware but I couldn't find any updates for the n520 camera. What gives???
Will the dash cam automatically display on the kenwood receiver when you put the vehicle in drive ?
No, but depending on the unit there is a camera button that will allow you to select all or any of your camera inputs
Thanks for your channel! Is it possible to connect DRV-N520 to DDX916WS?
I don't believe it has the input sorry.
Is it compatible with JVC?
It's supposed to be constantly be given power correct? I got one installed but it does not record when the vehicle is off and I wanted to know if that could be possible? From your video it seems yes
Kenwood DRV-N520 Drive Recorder Dash Cam. This version records constant when your car is off
I see that you hard wired the yellow , red and black wires for power but what are the two outputs on the back of the unit that are labelled cam + and cam - for ?
For a cmos740hd or a cmos320 rear view camera
@@isaiahwm do you know which position they're in on the back of the head unit? I have a unit I bought second hand, and there are no cam wires coming from the head unit, meaning my CMOS 320 is working just not view switching
do you know where i can get a replacement mount or hardwiring kit?
Yes you can buy from any thinkware dealer they should have them available. Mounts are about $25-40 depending. HWC is about $49 talking AUD here.
Work with the DDX9903S?
did you get yours to work with the ddx9903s, looks like its missing the dash cam connector on the back?
What model is your soldering iron?
Aussie Irons.
Pretty cool stuff
I know there isn't much comments but I hope someone can help me. I have the kenwood drv-330
I was in a collision . As I turned car of I don't know why but I pulled sd card out to make sure footage doesant go anywhere .
But now when I went to play it back it won't play it and I put sd card to laptop and can't get it there either. Does anyone know what happend. Please I need help .
Hi Armen, suggest reading the instruction manual for this or email kenwood direct for some more information regarding the way it records and saves files. Hope this helps.
@@AutoChimp thanks bro.
Nice video... Thanks
New message to: allanzshop
Hi Great video I was able to do the install OK but have one question.
Do you have any ideas why I cannot get the onscreen operating buttons to show up on screen?
I have the camera installed and working using the manual buttons on the camera but I do not get the option to access the onscreen. So I cannot use any of the features of the dashcam IE lane departure warning etc.
I have linked the dashcam to my Kenwood Head Unit model DDX920WDABS.
I have checked and doubled checked the settings but feel I must be missing something.
Tell your camera man to keep his hands away from the microphone.
Will do for our next big screen movie. ;D
I can't hear what he is saying. Poor audio